[PATCH net] net: dsa: mv88e6xxx: Increase wait after reset deactivation

[Andreas Svensson]

A switch held in reset by default needs to wait longer until we can
reliably detect it.

An issue was observed when testing on the Marvell 88E6393X (Link Street).
The driver failed to detect the switch on some upstarts. Increasing the
wait time after reset deactivation solves this issue.

The updated wait time is now also the same as the wait time in the
mv88e6xxx_hardware_reset function.

Fixes: 7b75e49de424 ("net: dsa: mv88e6xxx: wait after reset deactivation")
Signed-off-by: Andreas Svensson <andreas.svensson@xxxxxxxx>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 64a2f2f83735..08a46ffd53af 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -7170,7 +7170,7 @@ static int mv88e6xxx_probe(struct mdio_device *mdiodev)
 		goto out;
 	}
 	if (chip->reset)
-		usleep_range(1000, 2000);
+		usleep_range(10000, 20000);
 
 	/* Detect if the device is configured in single chip addressing mode,
 	 * otherwise continue with address specific smi init/detection.
-- 
2.30.2