Re: [PATCH 2/2] dt-bindings: i2c: imx-lpi2c: Add bus recovery example

From: Krzysztof Kozlowski
Date: Tue May 30 2023 - 10:59:12 EST


On 29/05/2023 09:43, carlos.song@xxxxxxx wrote:
> From: Clark Wang <xiaoning.wang@xxxxxxx>
>
> Add i2c bus recovery configuration example.

Why? That's just example... also with coding style issue.

>
> Signed-off-by: Clark Wang <xiaoning.wang@xxxxxxx>
> Signed-off-by: Carlos Song <carlos.song@xxxxxxx>
> ---
> .../devicetree/bindings/i2c/i2c-imx-lpi2c.yaml | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
> index 4656f5112b84..62ee457496e4 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
> @@ -58,6 +58,16 @@ properties:
> power-domains:
> maxItems: 1
>
> + pinctrl-names:
> + minItems: 1
> + maxItems: 3

What's the benefit of this? Entries should be defined but without it is
not really helpful. Anyway not explained in commit msg.

> +
> + scl-gpios:
> + maxItems: 1
> +
> + sda-gpios:
> + maxItems: 1

You don't need these two. Anyway not explained in commit msg.

> +
> required:
> - compatible
> - reg
> @@ -70,6 +80,7 @@ examples:
> - |
> #include <dt-bindings/clock/imx7ulp-clock.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/gpio/gpio.h>
>
> i2c@40a50000 {
> compatible = "fsl,imx7ulp-lpi2c";
> @@ -78,4 +89,9 @@ examples:
> interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clks IMX7ULP_CLK_LPI2C7>,
> <&clks IMX7ULP_CLK_NIC1_BUS_DIV>;
> + pinctrl-names = "default","gpio";

Missing space.

> + pinctrl-0 = <&pinctrl_i2c>;
> + pinctrl-1 = <&pinctrl_i2c_recovery>;
> + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> };

Best regards,
Krzysztof