Re: [v2 2/2] dt-bindings: input: touchscreen: Add ilitek 9882T touchscreen chip

[Doug Anderson]

Hi,

On Tue, May 30, 2023 at 4:56 AM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> On 22/05/2023 17:33, Doug Anderson wrote:
> > Hi,
> >
> > On Fri, May 19, 2023 at 10:07 PM Cong Yang
> > <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
> >>
> >> Add an ilitek touch screen chip ili9882t.
> >>
> >> Signed-off-by: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> >> ---
> >>  .../devicetree/bindings/input/elan,ekth6915.yaml         | 9 +++++++--
> >>  1 file changed, 7 insertions(+), 2 deletions(-)
> >
> > I'm curious about the DT maintainers opinion here. Should this be a
> > new bindings file, or should it be together in the elan file. If
> > nothing else, I think the secondary voltage rail name is wrong. I took
> > a quick peek at a datasheet I found and I don't even see a 3.3V rail
> > going to the ili9882t. That makes it weird to reuse "vcc33-supply" for
> > a second supply...
>
> It's easier if they are CCed...

Crud. I just assumed and didn't check the CC list. Cong: can you
resend and make sure you're CCing the people that get_maintainers
points at. One way to find that would be:

./scripts/get_maintainer.pl -f
Documentation/devicetree/bindings/input/elan,ekth6915.yaml