Re: [PATCH v4 02/41] ata: add HAS_IOPORT dependencies

[Sergey Shtylyov]

Hello!

On 5/16/23 1:59 PM, Niklas Schnelle wrote:

> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
> 
> Co-developed-by: Arnd Bergmann <arnd@xxxxxxxxxx>
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxxxx>
> Acked-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
>       per-subsystem patches may be applied independently
> 
>  drivers/ata/Kconfig       | 28 ++++++++++++++--------------
>  drivers/ata/ata_generic.c |  2 ++
>  drivers/ata/libata-sff.c  |  2 ++
>  include/linux/libata.h    |  2 ++
>  4 files changed, 20 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 42b51c9812a0..c521cdc51f8c 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
[...]

   Shouldn't there be an entry for the ATIIXP driver here? It doesn't
call in*/out*() but it does call ata_bmdma_{start|stop}() that call
ioread*/iowrite*()...
   And shouldn't there be an entry for APT867x driver too? It does call
ioread*/iowrite*()...
 
[...]

   Shouldn't there be an entry for the HPT3x3 driver too? It does call
ioread*/iowrite*()... and also for the IT821x driver? And the Marvall
driver?

> @@ -819,7 +819,7 @@ config PATA_MPC52xx
>  
>  config PATA_NETCELL
>  	tristate "NETCELL Revolution RAID support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT

   Not clear why -- because it calls ata_pci_bmdma_clear_simplex()?

[...]

   Shouldn't there be an entry for the NS87415 driver too? It does
call ioread*/iowrite*()...

[...]
> @@ -919,7 +919,7 @@ config PATA_SCH
>  
>  config PATA_SERVERWORKS
>  	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT

   Not clear why -- because it calls ata_pci_bmdma_clear_simplex()?

[...]

   Shouldn't there be an entry for the VIA driver too? It does call
ioread*/iowrite*()... and SiL680 driver too... and Winbond SL82C105
driver too... and OPTi PIO driver too... and PCMCIA driver too...

[...]
> @@ -1183,7 +1183,7 @@ config ATA_GENERIC
>  
>  config PATA_LEGACY
>  	tristate "Legacy ISA PATA support (Experimental)"
> -	depends on (ISA || PCI)
> +	depends on (ISA || PCI) && HAS_IOPORT
>  	select PATA_TIMINGS

   Hm, won't it override the HAS_IOPORT dependency, if you enable
PATA_QDI or PATA_WINBOD_VLB?

>  	help
>  	  This option enables support for ISA/VLB/PCI bus legacy PATA
> diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
> index 2f57ec00ab82..2d391d117f74 100644
> --- a/drivers/ata/ata_generic.c
> +++ b/drivers/ata/ata_generic.c

   This driver calls ioread8() as well...

> @@ -197,8 +197,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
>  	if (!(command & PCI_COMMAND_IO))
>  		return -ENODEV;
>  
> +#ifdef CONFIG_PATA_ALI

   This #ifdef doesn't make sense to me -- pata_ali.c will call
the below function anyway, no?
>  	if (dev->vendor == PCI_VENDOR_ID_AL)
>  		ata_pci_bmdma_clear_simplex(dev);
> +#endif /* CONFIG_PATA_ALI */
>  	if (dev->vendor == PCI_VENDOR_ID_ATI) {
>  		int rc = pcim_enable_device(dev);
> diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
> index 9d28badfe41d..80137edb7ebf 100644
> --- a/drivers/ata/libata-sff.c
> +++ b/drivers/ata/libata-sff.c
> @@ -3031,6 +3031,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
>  
>  #ifdef CONFIG_PCI
>  
> +#ifdef CONFIG_HAS_IOPORT
>  /**
>   *	ata_pci_bmdma_clear_simplex -	attempt to kick device out of simplex
>   *	@pdev: PCI device
> @@ -3056,6 +3057,7 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
> +#endif /* CONFIG_HAS_IOPORT */
>  
>  static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
>  {
> diff --git a/include/linux/libata.h b/include/linux/libata.h
> index 311cd93377c7..90002d4a785b 100644
> --- a/include/linux/libata.h
> +++ b/include/linux/libata.h
> @@ -2012,7 +2012,9 @@ extern int ata_bmdma_port_start(struct ata_port *ap);
>  extern int ata_bmdma_port_start32(struct ata_port *ap);
>  
>  #ifdef CONFIG_PCI
> +#ifdef CONFIG_HAS_IOPORT
>  extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
> +#endif /* CONFIG_HAS_IOPORT */

   Hm, wouldn't it be better if you used #else and declare an inline
variant of this function simply retirning an error?

[...]

MBR, Sergey