Re: [PATCH v6 00/10 RESEND] Add RT5033 charger device driver

[Jakob Hauser]

Dear all,

On 15.05.23 22:57, Jakob Hauser wrote:
> This patchset adds the charger driver "rt5033-charger". It is part of the
> multifunction device rt5033. The patchset is based on an older version by
> Beomho Seo of March 2015. For more information on the history and setup of
> the patchset see the cover sheet of version v1, there is a link further down
> below the changelog.
>
> RESEND: Sorry for spamming. The first try of sending v6 got interrupted and
> was split into two threads on the lore list. Therefore sending it again.
>
> Changes in v6:
>   - Patch 5: In function rt5033_charger_probe() after
>     calling rt5033_charger_dt_init() replaced the return value from "-ENODEV"
>     to "PTR_ERR(charger->chg)", as suggested by Christophe.
>   - Patch 9: Changed the patch from adding "power-supplies: true" to replacing
>     "additionalProperties: false" by "unevaluatedProperties: false", as
>     suggested by Krzysztof.
>
> v1: https://lore.kernel.org/linux-pm/cover.1677620677.git.jahau@xxxxxxxxxxxxxx/T/#t
> v2: https://lore.kernel.org/linux-pm/cover.1681646904.git.jahau@xxxxxxxxxxxxxx/T/#t
> v3: https://lore.kernel.org/linux-pm/cover.1682636929.git.jahau@xxxxxxxxxxxxxx/T/#t
> v4: https://lore.kernel.org/linux-pm/20230506155435.3005-1-jahau@xxxxxxxxxxxxxx/T/#t
> v5: https://lore.kernel.org/linux-pm/20230514123130.41172-1-jahau@xxxxxxxxxxxxxx/T/#t
>
> The result of the patchset v6 can be seen at:
> https://github.com/Jakko3/linux/blob/rt5033-charger_v6/drivers/power/supply/rt5033_charger.c

What's missing on this patchset? I'm not familiar with the procedures. 
If all patches need ack's, then the ones for mfd (patches 2 & 4) and for 
dt-bindings (patch 10) are missing.

Link to the current patchset v6:
- on lore: 
https://lore.kernel.org/linux-pm/cover.1684182964.git.jahau@xxxxxxxxxxxxxx/T/#t
- on patchwork: 
https://patchwork.kernel.org/project/linux-pm/list/?series=747771&state=%2A&archive=both

> Jakob Hauser (9):
>    mfd: rt5033: Fix chip revision readout
>    mfd: rt5033: Fix STAT_MASK, HZ_MASK and AICR defines
>    mfd: rt5033: Apply preparatory changes before adding rt5033-charger
>      driver
>    power: supply: rt5033_charger: Add RT5033 charger device driver
>    power: supply: rt5033_charger: Add cable detection and USB OTG supply
>    power: supply: rt5033_battery: Move struct rt5033_battery to battery
>      driver
>    power: supply: rt5033_battery: Adopt status property from charger
>    dt-bindings: power: supply: rt5033-battery: Apply
>      unevaluatedProperties
>    dt-bindings: Add rt5033 mfd, regulator and charger
>
> Stephan Gerhold (1):
>    mfd: rt5033: Drop rt5033-battery sub-device
>
>   .../bindings/mfd/richtek,rt5033.yaml          | 138 ++++
>   .../power/supply/richtek,rt5033-battery.yaml  |   2 +-
>   .../power/supply/richtek,rt5033-charger.yaml  |  65 ++
>   drivers/mfd/rt5033.c                          |   8 +-
>   drivers/power/supply/Kconfig                  |   8 +
>   drivers/power/supply/Makefile                 |   1 +
>   drivers/power/supply/rt5033_battery.c         |  38 +-
>   drivers/power/supply/rt5033_charger.c         | 744 ++++++++++++++++++
>   include/linux/mfd/rt5033-private.h            |  64 +-
>   include/linux/mfd/rt5033.h                    |  24 -
>   10 files changed, 1034 insertions(+), 58 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
>   create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
>   create mode 100644 drivers/power/supply/rt5033_charger.c

Kind regards,
Jakob