[PATCH 0/2] arm64: dts: qcom: add DP Controller to SM8550 DTS

[Neil Armstrong]

The DP output is shared with the USB3 SuperSpeed lanes and is
usually connected to an USB-C port which Altmode is controlled
by the PMIC Glink infrastructure.

DT changes tying the DP controller to the USB-C port on the QRD
board will be sent later.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
Neil Armstrong (2):
      dt-bindings: display: msm: dp-controller: document SM8550 compatible
      arm64: dts: qcom: sm8550: add display port nodes

 .../bindings/display/msm/dp-controller.yaml        |  1 +
 arch/arm64/boot/dts/qcom/sm8550.dtsi               | 89 +++++++++++++++++++++-
 2 files changed, 88 insertions(+), 2 deletions(-)
---
base-commit: d4cee89031c80066ec461bb77b5e13a4f37d5fd2
change-id: 20230601-topic-sm8550-upstream-dp-b713ba275d7c

Best regards,
-- 
Neil Armstrong <neil.armstrong@xxxxxxxxxx>