[PATCH v2 5/8] rust: workqueue: add helper for defining work_struct fields

From: Alice Ryhl
Date: Thu Jun 01 2023 - 09:55:40 EST

The main challenge with defining `work_struct` fields is making sure
that the function pointer stored in the `work_struct` is appropriate for
the work item type it is embedded in. It needs to know the offset of the
`work_struct` field being used (even if there are several!) so that it
can do a `container_of`, and it needs to know the type of the work item
so that it can call into the right user-provided code. All of this needs
to happen in a way that provides a safe API to the user, so that users
of the workqueue cannot mix up the function pointers.

There are three important pieces that are relevant when doing this:

* The pointer type.
* The work item struct. This is what the pointer points at.
* The `work_struct` field. This is a field of the work item struct.

This patch introduces a separate trait for each piece. The pointer type
is given a `WorkItemPointer` trait, which pointer types need to
implement to be usable with the workqueue. This trait will be
implemented for `Arc` and `Box` in a later patch in this patchset.
Implementing this trait is unsafe because this is where the
`container_of` operation happens, but user-code will not need to
implement it themselves.

The work item struct should then implement the `WorkItem` trait. This
trait is where user-code specifies what they want to happen when a work
item is executed. It also specifies what the correct pointer type is.

Finally, to make the work item struct know the offset of its
`work_struct` field, we use a trait called `HasWork<T, ID>`. If a type
implements this trait, then the type declares that, at the given offset,
there is a field of type `Work<T, ID>`. The trait is marked unsafe
because the OFFSET constant must be correct, but we provide an
`impl_has_work!` macro that can safely implement `HasWork<T>` on a type.
The macro expands to something that only compiles if the specified field
really has the type `Work<T>`. It is used like this:

```
struct MyWorkItem {
work_field: Work<MyWorkItem, 1>,
}

impl_has_work! {
impl HasWork<MyWorkItem, 1> for MyWorkItem { self.work_field }
}
```

Note that since the `Work` type is annotated with an id, you can have
several `work_struct` fields by using a different id for each one.

Co-developed-by: Gary Guo <gary@xxxxxxxxxxx>
Signed-off-by: Gary Guo <gary@xxxxxxxxxxx>
Signed-off-by: Alice Ryhl <aliceryhl@xxxxxxxxxx>
---
rust/helpers.c | 8 ++
rust/kernel/workqueue.rs | 219 ++++++++++++++++++++++++++++++++++++++-
2 files changed, 226 insertions(+), 1 deletion(-)

diff --git a/rust/helpers.c b/rust/helpers.c
index 81e80261d597..7f0c2fe2fbeb 100644
--- a/rust/helpers.c
+++ b/rust/helpers.c
@@ -26,6 +26,7 @@
#include <linux/spinlock.h>
#include <linux/sched/signal.h>
#include <linux/wait.h>
+#include <linux/workqueue.h>

__noreturn void rust_helper_BUG(void)
{
@@ -128,6 +129,13 @@ void rust_helper_put_task_struct(struct task_struct *t)
}
EXPORT_SYMBOL_GPL(rust_helper_put_task_struct);

+void rust_helper___INIT_WORK(struct work_struct *work, work_func_t func,
+ bool on_stack)
+{
+ __INIT_WORK(work, func, on_stack);
+}
+EXPORT_SYMBOL_GPL(rust_helper___INIT_WORK);
+
/*
* We use `bindgen`'s `--size_t-is-usize` option to bind the C `size_t` type
* as the Rust `usize` type, so we can use it in contexts where Rust
diff --git a/rust/kernel/workqueue.rs b/rust/kernel/workqueue.rs
index e37820f253f6..dbf0aab29a85 100644
--- a/rust/kernel/workqueue.rs
+++ b/rust/kernel/workqueue.rs
@@ -2,9 +2,34 @@

//! Work queues.
//!
+//! This file has two components: The raw work item API, and the safe work item API.
+//!
+//! One pattern that is used in both APIs is the `ID` const generic, which exists to allow a single
+//! type to define multiple `work_struct` fields. This is done by choosing an id for each field,
+//! and using that id to specify which field you wish to use. (The actual value doesn't matter, as
+//! long as you use different values for different fields of the same struct.) Since these IDs are
+//! generic, they are used only at compile-time, so they shouldn't exist in the final binary.
+//!
+//! # The raw API
+//!
+//! The raw API consists of the `RawWorkItem` trait, where the work item needs to provide an
+//! arbitrary function that knows how to enqueue the work item. It should usually not be used
+//! directly, but if you want to, you can use it without using the pieces from the safe API.
+//!
+//! # The safe API
+//!
+//! The safe API is used via the `Work` struct and `WorkItem` traits. Furthermore, it also includes
+//! a trait called `WorkItemPointer`, which is usually not used directly by the user.
+//!
+//! * The `Work` struct is the Rust wrapper for the C `work_struct` type.
+//! * The `WorkItem` trait is implemented for structs that can be enqueued to a workqueue.
+//! * The `WorkItemPointer` trait is implemented for the pointer type that points at a something
+//! that implements `WorkItem`.
+//!
//! C header: [`include/linux/workqueue.h`](../../../../include/linux/workqueue.h)

-use crate::{bindings, types::Opaque};
+use crate::{bindings, prelude::*, types::Opaque};
+use core::marker::{PhantomData, PhantomPinned};

/// A kernel work queue.
///
@@ -106,6 +131,198 @@ unsafe fn __enqueue<F>(self, queue_work_on: F) -> Self::EnqueueOutput
F: FnOnce(*mut bindings::work_struct) -> bool;
}

+/// Defines the method that should be called directly when a work item is executed.
+///
+/// Typically you would implement [`WorkItem`] instead. The `run` method on this trait will
+/// usually just perform the appropriate `container_of` translation and then call into the `run`
+/// method from the [`WorkItem`] trait.
+///
+/// This trait is used when the `work_struct` field is defined using the [`Work`] helper.
+///
+/// # Safety
+///
+/// Implementers must ensure that [`__enqueue`] uses a `work_struct` initialized with the [`run`]
+/// method of this trait as the function pointer.
+///
+/// [`__enqueue`]: RawWorkItem::__enqueue
+/// [`run`]: WorkItemPointer::run
+pub unsafe trait WorkItemPointer<const ID: u64>: RawWorkItem<ID> {
+ /// Run this work item.
+ ///
+ /// # Safety
+ ///
+ /// The provided `work_struct` pointer must originate from a previous call to `__enqueue` where
+ /// the `queue_work_on` closure returned true, and the pointer must still be valid.
+ unsafe extern "C" fn run(ptr: *mut bindings::work_struct);
+}
+
+/// Defines the method that should be called when this work item is executed.
+///
+/// This trait is used when the `work_struct` field is defined using the [`Work`] helper.
+pub trait WorkItem<const ID: u64 = 0> {
+ /// The pointer type that this struct is wrapped in. This will typically be `Arc<Self>` or
+ /// `Pin<Box<Self>>`.
+ type Pointer: WorkItemPointer<ID>;
+
+ /// The method that should be called when this work item is executed.
+ fn run(this: Self::Pointer);
+}
+
+/// Links for a work item.
+///
+/// This struct contains a function pointer to the `run` function from the [`WorkItemPointer`]
+/// trait, and defines the linked list pointers necessary to enqueue a work item in a workqueue.
+///
+/// Wraps the kernel's C `struct work_struct`.
+///
+/// This is a helper type used to associate a `work_struct` with the [`WorkItem`] that uses it.
+#[repr(transparent)]
+pub struct Work<T: ?Sized, const ID: u64 = 0> {
+ work: Opaque<bindings::work_struct>,
+ _pin: PhantomPinned,
+ _inner: PhantomData<T>,
+}
+
+// SAFETY: Kernel work items are usable from any thread.
+//
+// We do not need to constrain `T` since the work item does not actually contain a `T`.
+unsafe impl<T: ?Sized, const ID: u64> Send for Work<T, ID> {}
+// SAFETY: Kernel work items are usable from any thread.
+//
+// We do not need to constrain `T` since the work item does not actually contain a `T`.
+unsafe impl<T: ?Sized, const ID: u64> Sync for Work<T, ID> {}
+
+impl<T: ?Sized, const ID: u64> Work<T, ID> {
+ /// Creates a new instance of [`Work`].
+ #[inline]
+ #[allow(clippy::new_ret_no_self)]
+ pub fn new() -> impl PinInit<Self>
+ where
+ T: WorkItem<ID>,
+ {
+ // SAFETY: The `WorkItemPointer` implementation promises that `run` can be used as the work
+ // item function.
+ unsafe {
+ kernel::init::pin_init_from_closure(move |slot| {
+ bindings::__INIT_WORK(Self::raw_get(slot), Some(T::Pointer::run), false);
+ Ok(())
+ })
+ }
+ }
+
+ /// Get a pointer to the inner `work_struct`.
+ ///
+ /// # Safety
+ ///
+ /// The provided pointer must not be dangling and must be properly aligned. (But the memory
+ /// need not be initialized.)
+ #[inline]
+ pub unsafe fn raw_get(ptr: *const Self) -> *mut bindings::work_struct {
+ // SAFETY: The caller promises that the pointer is aligned and not dangling.
+ //
+ // A pointer cast would also be ok due to `#[repr(transparent)]`. We use `addr_of!` so that
+ // the compiler does not complain that the `work` field is unused.
+ unsafe { Opaque::raw_get(core::ptr::addr_of!((*ptr).work)) }
+ }
+}
+
+/// Declares that a type has a [`Work<T, ID>`] field.
+///
+/// # Safety
+///
+/// The [`OFFSET`] constant must be the offset of a field in Self of type [`Work<T, ID>`]. The methods on
+/// this trait must have exactly the behavior that the definitions given below have.
+///
+/// [`Work<T, ID>`]: Work
+/// [`OFFSET`]: HasWork::OFFSET
+pub unsafe trait HasWork<T, const ID: u64 = 0> {
+ /// The offset of the [`Work<T, ID>`] field.
+ ///
+ /// [`Work<T, ID>`]: Work
+ const OFFSET: usize;
+
+ /// Returns the offset of the [`Work<T, ID>`] field.
+ ///
+ /// This method exists because the [`OFFSET`] constant cannot be accessed if the type is not Sized.
+ ///
+ /// [`Work<T, ID>`]: Work
+ /// [`OFFSET`]: HasWork::OFFSET
+ #[inline]
+ fn get_work_offset(&self) -> usize {
+ Self::OFFSET
+ }
+
+ /// Returns a pointer to the [`Work<T, ID>`] field.
+ ///
+ /// # Safety
+ ///
+ /// The provided pointer must point at a valid struct of type `Self`.
+ ///
+ /// [`Work<T, ID>`]: Work
+ #[inline]
+ unsafe fn raw_get_work(ptr: *mut Self) -> *mut Work<T, ID> {
+ // SAFETY: The caller promises that the pointer is valid.
+ unsafe { (ptr as *mut u8).add(Self::OFFSET) as *mut Work<T, ID> }
+ }
+
+ /// Returns a pointer to the struct containing the [`Work<T, ID>`] field.
+ ///
+ /// # Safety
+ ///
+ /// The pointer must point at a [`Work<T, ID>`] field in a struct of type `Self`.
+ ///
+ /// [`Work<T, ID>`]: Work
+ #[inline]
+ unsafe fn work_container_of(ptr: *mut Work<T, ID>) -> *mut Self
+ where
+ Self: Sized,
+ {
+ // SAFETY: The caller promises that the pointer points at a field of the right type in the
+ // right kind of struct.
+ unsafe { (ptr as *mut u8).sub(Self::OFFSET) as *mut Self }
+ }
+}
+
+/// Used to safely implement the [`HasWork<T, ID>`] trait.
+///
+/// # Examples
+///
+/// ```
+/// use kernel::sync::Arc;
+///
+/// struct MyStruct {
+/// work_field: Work<MyStruct, 17>,
+/// }
+///
+/// impl_has_work! {
+/// impl HasWork<MyStruct, 17> for MyStruct { self.work_field }
+/// }
+/// ```
+///
+/// [`HasWork<T, ID>`]: HasWork
+#[macro_export]
+macro_rules! impl_has_work {
+ ($(impl$(<$($implarg:ident),*>)?
+ HasWork<$work_type:ty $(, $id:tt)?>
+ for $self:ident $(<$($selfarg:ident),*>)?
+ { self.$field:ident }
+ )*) => {$(
+ // SAFETY: The implementation of `raw_get_work` only compiles if the field has the right
+ // type.
+ unsafe impl$(<$($implarg),*>)? $crate::workqueue::HasWork<$work_type $(, $id)?> for $self $(<$($selfarg),*>)? {
+ const OFFSET: usize = $crate::offset_of!(Self, $field) as usize;
+
+ #[inline]
+ unsafe fn raw_get_work(ptr: *mut Self) -> *mut $crate::workqueue::Work<$work_type $(, $id)?> {
+ // SAFETY: The caller promises that the pointer is not dangling.
+ unsafe {
+ ::core::ptr::addr_of_mut!((*ptr).$field)
+ }
+ }
+ }
+ )*};
+}
+
/// Returns the system work queue (`system_wq`).
///
/// It is the one used by `schedule[_delayed]_work[_on]()`. Multi-CPU multi-threaded. There are
--
2.41.0.rc0.172.g3f132b7071-goog