Re: [PATCH V3 3/5] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550

[Dmitry Baryshkov]

On 01/06/2023 17:34, Jagadeesh Kona wrote:
> Add support for the camera clock controller for camera clients to be
> able to request for camcc clocks on SM8550 platform.
>
> Co-developed-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
> Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
> Signed-off-by: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
> ---
> Changes since V2:
>   - No changes
> Changes since V1:
>   - Sorted the PLL names in proper order
>   - Updated all PLL configurations to lower case hex
>   - Reused evo ops instead of adding new ops for ole pll
>   - Moved few clocks to separate patch to fix patch too long error
>
>   drivers/clk/qcom/Kconfig        |    7 +
>   drivers/clk/qcom/Makefile       |    1 +
>   drivers/clk/qcom/camcc-sm8550.c | 3405 +++++++++++++++++++++++++++++++
>   3 files changed, 3413 insertions(+)
>   create mode 100644 drivers/clk/qcom/camcc-sm8550.c

[skipped]

> +
> +static struct platform_driver cam_cc_sm8550_driver = {
> +	.probe = cam_cc_sm8550_probe,
> +	.driver = {
> +		.name = "cam_cc-sm8550",
> +		.of_match_table = cam_cc_sm8550_match_table,
> +	},
> +};
> +
> +static int __init cam_cc_sm8550_init(void)
> +{
> +	return platform_driver_register(&cam_cc_sm8550_driver);
> +}
> +subsys_initcall(cam_cc_sm8550_init);
> +
> +static void __exit cam_cc_sm8550_exit(void)
> +{
> +	platform_driver_unregister(&cam_cc_sm8550_driver);
> +}
> +module_exit(cam_cc_sm8550_exit);

Please convert this to use module_platform_driver

> +
> +MODULE_DESCRIPTION("QTI CAMCC SM8550 Driver");
> +MODULE_LICENSE("GPL");

--
With best wishes
Dmitry