[PATCH v2 2/3] spi: cadence-quadspi: Add clock configuration for StarFive JH7110 QSPI
From: William Qiu
Date: Fri Jun 02 2023 - 04:50:05 EST
Add QSPI clock operation in device probe.
Signed-off-by: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
Reviewed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
---
drivers/spi/spi-cadence-quadspi.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 6ddb2dfc0f00..21788472c7fb 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -63,6 +63,8 @@ struct cqspi_st {
struct platform_device *pdev;
struct spi_master *master;
struct clk *clk;
+ struct clk_bulk_data *clks;
+ unsigned int num_clks;
unsigned int sclk;
void __iomem *iobase;
@@ -1715,6 +1717,16 @@ static int cqspi_probe(struct platform_device *pdev)
}
if (of_device_is_compatible(pdev->dev.of_node, "starfive,jh7110-qspi")) {
+ cqspi->num_clks = devm_clk_bulk_get_all(dev, &cqspi->clks);
+ if (cqspi->num_clks < 0) {
+ dev_err(dev, "Cannot claim clock: %u\n", cqspi->num_clks);
+ return -EINVAL;
+ }
+
+ ret = clk_bulk_prepare_enable(cqspi->num_clks, cqspi->clks);
+ if (ret)
+ dev_err(dev, "Cannot enable clock clks\n");
+
rstc_ref = devm_reset_control_get_optional_exclusive(dev, "rstc_ref");
if (IS_ERR(rstc_ref)) {
ret = PTR_ERR(rstc_ref);
@@ -1816,6 +1828,9 @@ static void cqspi_remove(struct platform_device *pdev)
clk_disable_unprepare(cqspi->clk);
+ if (of_device_is_compatible(pdev->dev.of_node, "starfive,jh7110-qspi"))
+ clk_bulk_disable_unprepare(cqspi->num_clks, cqspi->clks);
+
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
}
@@ -1831,6 +1846,9 @@ static int cqspi_suspend(struct device *dev)
clk_disable_unprepare(cqspi->clk);
+ if (of_device_is_compatible(dev->of_node, "starfive,jh7110-qspi"))
+ clk_bulk_disable_unprepare(cqspi->num_clks, cqspi->clks);
+
return ret;
}
@@ -1840,6 +1858,8 @@ static int cqspi_resume(struct device *dev)
struct spi_master *master = dev_get_drvdata(dev);
clk_prepare_enable(cqspi->clk);
+ if (of_device_is_compatible(dev->of_node, "starfive,jh7110-qspi"))
+ clk_bulk_prepare_enable(cqspi->num_clks, cqspi->clks);
cqspi_wait_idle(cqspi);
cqspi_controller_init(cqspi);
--
2.34.1