Re: [PATCH net-next 08/30] net: dsa: mt7530: change p{5,6}_interface to p{5,6}_configured

[Russell King (Oracle)]

On Sat, Jun 03, 2023 at 03:15:52PM +0300, Arınç ÜNAL wrote:
> On 26.05.2023 16:01, Vladimir Oltean wrote:
> > Ok, but given the premise of this patch set, that phylink is always available,
> > does it make sense for mt7531_cpu_port_config() and mt7988_cpu_port_config()
> > to manually call phylink methods?
> 
> All I know is that that's how the implementation of phylink's PCS support in
> this driver works. It expects the MAC to be set up before calling
> mt753x_phylink_pcs_link_up() and mt753x_phylink_mac_link_up().

First, do you see a message printed for the DSA device indicating that
a link is up, without identifying the interface? For example, with
mv88e6xxx:

mv88e6085 f1072004.mdio-mii:04: Link is Up - 1Gbps/Full - flow control off

as opposed to a user port which will look like this:

mv88e6085 f1072004.mdio-mii:04 lan1: Link is Up - 1Gbps/Full - flow control rx/tx

If you do, that's likely for the CPU port, and indicates that phylink
is being used for the CPU port. If not, then you need to investigate
whether you've provided the full description in DT for the CPU port.
In other words, phy-mode and a fixed-link specification or in-band
mode.

Given that, you should have no need to make explicit calls to your
mac_config, pcs_link_up and mac_link_up functions. If you need to
make these calls, it suggests that phylink is not being used for the
CPU port.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!