[PATCH] usb: usb251xb: Use of_property_read_u16()

[Christophe JAILLET]

Use of_property_read_u16() instead of of_property_read_u16_array() when
only 1 element is read.
This slightly simplifies the code.

Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
 drivers/usb/misc/usb251xb.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 1f3329ef5c7a..e4edb486b69e 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -416,14 +416,13 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 		return dev_err_probe(dev, PTR_ERR(hub->gpio_reset),
 				     "unable to request GPIO reset pin\n");
 
-	if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1))
+	if (of_property_read_u16(np, "vendor-id", &hub->vendor_id))
 		hub->vendor_id = USB251XB_DEF_VENDOR_ID;
 
-	if (of_property_read_u16_array(np, "product-id",
-				       &hub->product_id, 1))
+	if (of_property_read_u16(np, "product-id", &hub->product_id))
 		hub->product_id = data->product_id;
 
-	if (of_property_read_u16_array(np, "device-id", &hub->device_id, 1))
+	if (of_property_read_u16(np, "device-id", &hub->device_id))
 		hub->device_id = USB251XB_DEF_DEVICE_ID;
 
 	hub->conf_data1 = USB251XB_DEF_CONFIG_DATA_1;
@@ -532,7 +531,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	if (!of_property_read_u32(np, "power-on-time-ms", &property_u32))
 		hub->power_on_time = min_t(u8, property_u32 / 2, 255);
 
-	if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1))
+	if (of_property_read_u16(np, "language-id", &hub->lang_id))
 		hub->lang_id = USB251XB_DEF_LANGUAGE_ID;
 
 	if (of_property_read_u8(np, "boost-up", &hub->boost_up))
-- 
2.34.1