[PATCH net-next v7 1/1] net: dsa: mv88e6xxx: implement USXGMII mode for mv88e6393x
From: msmulski2
Date: Mon Jun 05 2023 - 01:40:11 EST
From: Michal Smulski <michal.smulski@xxxxxxxx>
Enable USXGMII mode for mv88e6393x chips. Tested on Marvell 88E6191X.
Signed-off-by: Michal Smulski <michal.smulski@xxxxxxxx>
---
drivers/net/dsa/mv88e6xxx/chip.c | 3 +-
drivers/net/dsa/mv88e6xxx/port.c | 3 ++
drivers/net/dsa/mv88e6xxx/serdes.c | 47 ++++++++++++++++++++++++++++--
drivers/net/dsa/mv88e6xxx/serdes.h | 4 +++
4 files changed, 53 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 2af0c1145d36..8b51756bd805 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -812,11 +812,10 @@ static void mv88e6393x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
if (!is_6361) {
__set_bit(PHY_INTERFACE_MODE_5GBASER, supported);
__set_bit(PHY_INTERFACE_MODE_10GBASER, supported);
+ __set_bit(PHY_INTERFACE_MODE_USXGMII, supported);
config->mac_capabilities |= MAC_5000FD |
MAC_10000FD;
}
- /* FIXME: USXGMII is not supported yet */
- /* __set_bit(PHY_INTERFACE_MODE_USXGMII, supported); */
}
}
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index e9b4a6ea4d09..dd66ec902d4c 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -566,6 +566,9 @@ static int mv88e6xxx_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
case PHY_INTERFACE_MODE_10GBASER:
cmode = MV88E6393X_PORT_STS_CMODE_10GBASER;
break;
+ case PHY_INTERFACE_MODE_USXGMII:
+ cmode = MV88E6393X_PORT_STS_CMODE_USXGMII;
+ break;
default:
cmode = 0;
}
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 72faec8f44dc..a28b368ed016 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -683,7 +683,8 @@ int mv88e6393x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
cmode == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
cmode == MV88E6393X_PORT_STS_CMODE_5GBASER ||
- cmode == MV88E6393X_PORT_STS_CMODE_10GBASER)
+ cmode == MV88E6393X_PORT_STS_CMODE_10GBASER ||
+ cmode == MV88E6393X_PORT_STS_CMODE_USXGMII)
lane = port;
return lane;
@@ -984,7 +985,42 @@ static int mv88e6393x_serdes_pcs_get_state_10g(struct mv88e6xxx_chip *chip,
state->speed = SPEED_10000;
state->duplex = DUPLEX_FULL;
}
+ return 0;
+}
+
+/* USXGMII registers for Marvell switch 88e639x are undocumented and this function is based
+ * on some educated guesses. It appears that there are no status bits related to
+ * autonegotiation complete or flow control.
+ */
+static int mv88e639x_serdes_pcs_get_state_usxgmii(struct mv88e6xxx_chip *chip,
+ int port, int lane,
+ struct phylink_link_state *state)
+{
+ u16 status, lp_status;
+ int err;
+
+ err = mv88e6390_serdes_read(chip, lane, MDIO_MMD_PHYXS,
+ MV88E6390_USXGMII_PHY_STATUS, &status);
+ if (err) {
+ dev_err(chip->dev, "can't read Serdes USXGMII PHY status: %d\n", err);
+ return err;
+ }
+ dev_dbg(chip->dev, "USXGMII PHY status: 0x%x\n", status);
+
+ state->link = !!(status & MDIO_USXGMII_LINK);
+ state->an_complete = state->link;
+
+ if (state->link) {
+ err = mv88e6390_serdes_read(chip, lane, MDIO_MMD_PHYXS,
+ MV88E6390_USXGMII_LP_STATUS, &lp_status);
+ if (err) {
+ dev_err(chip->dev, "can't read Serdes USXGMII LP status: %d\n", err);
+ return err;
+ }
+ dev_dbg(chip->dev, "USXGMII LP status: 0x%x\n", lp_status);
+ phylink_decode_usxgmii_word(state, lp_status);
+ }
return 0;
}
@@ -1020,6 +1056,9 @@ int mv88e6393x_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
case PHY_INTERFACE_MODE_10GBASER:
return mv88e6393x_serdes_pcs_get_state_10g(chip, port, lane,
state);
+ case PHY_INTERFACE_MODE_USXGMII:
+ return mv88e639x_serdes_pcs_get_state_usxgmii(chip, port, lane,
+ state);
default:
return -EOPNOTSUPP;
@@ -1173,6 +1212,7 @@ int mv88e6393x_serdes_irq_enable(struct mv88e6xxx_chip *chip, int port,
return mv88e6390_serdes_irq_enable_sgmii(chip, lane, enable);
case MV88E6393X_PORT_STS_CMODE_5GBASER:
case MV88E6393X_PORT_STS_CMODE_10GBASER:
+ case MV88E6393X_PORT_STS_CMODE_USXGMII:
return mv88e6393x_serdes_irq_enable_10g(chip, lane, enable);
}
@@ -1213,6 +1253,7 @@ irqreturn_t mv88e6393x_serdes_irq_status(struct mv88e6xxx_chip *chip, int port,
break;
case MV88E6393X_PORT_STS_CMODE_5GBASER:
case MV88E6393X_PORT_STS_CMODE_10GBASER:
+ case MV88E6393X_PORT_STS_CMODE_USXGMII:
err = mv88e6393x_serdes_irq_status_10g(chip, lane, &status);
if (err)
return err;
@@ -1477,7 +1518,8 @@ static int mv88e6393x_serdes_erratum_5_2(struct mv88e6xxx_chip *chip, int lane,
* to SERDES operating in 10G mode. These registers only apply to 10G
* operation and have no effect on other speeds.
*/
- if (cmode != MV88E6393X_PORT_STS_CMODE_10GBASER)
+ if (cmode != MV88E6393X_PORT_STS_CMODE_10GBASER &&
+ cmode != MV88E6393X_PORT_STS_CMODE_USXGMII)
return 0;
for (i = 0; i < ARRAY_SIZE(fixes); ++i) {
@@ -1582,6 +1624,7 @@ int mv88e6393x_serdes_power(struct mv88e6xxx_chip *chip, int port, int lane,
break;
case MV88E6393X_PORT_STS_CMODE_5GBASER:
case MV88E6393X_PORT_STS_CMODE_10GBASER:
+ case MV88E6393X_PORT_STS_CMODE_USXGMII:
err = mv88e6390_serdes_power_10g(chip, lane, on);
break;
default:
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h
index 29bb4e91e2f6..e245687ddb1d 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.h
+++ b/drivers/net/dsa/mv88e6xxx/serdes.h
@@ -48,6 +48,10 @@
#define MV88E6393X_10G_INT_LINK_CHANGE BIT(2)
#define MV88E6393X_10G_INT_STATUS 0x9001
+/* USXGMII */
+#define MV88E6390_USXGMII_LP_STATUS 0xf0a2
+#define MV88E6390_USXGMII_PHY_STATUS 0xf0a6
+
/* 1000BASE-X and SGMII */
#define MV88E6390_SGMII_BMCR (0x2000 + MII_BMCR)
#define MV88E6390_SGMII_BMSR (0x2000 + MII_BMSR)
--
2.34.1