Re: [PATCH 9/9] drm/verisilicon: Add starfive hdmi driver
From: Philipp Zabel
Date: Mon Jun 05 2023 - 04:09:07 EST
Hi Keith,
On Fri, Jun 02, 2023 at 03:40:43PM +0800, Keith Zhao wrote:
> Add HDMI dirver for StarFive SoC JH7110.
>
> Signed-off-by: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/verisilicon/Kconfig | 11 +
> drivers/gpu/drm/verisilicon/Makefile | 1 +
> drivers/gpu/drm/verisilicon/starfive_hdmi.c | 928 ++++++++++++++++++++
> drivers/gpu/drm/verisilicon/starfive_hdmi.h | 296 +++++++
> drivers/gpu/drm/verisilicon/vs_drv.c | 6 +
> drivers/gpu/drm/verisilicon/vs_drv.h | 4 +
> 6 files changed, 1246 insertions(+)
> create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
> create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
>
[...]
> diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.c b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
> new file mode 100644
> index 000000000000..128ecca03309
> --- /dev/null
> +++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
> @@ -0,0 +1,928 @@
[...]
> +static int starfive_hdmi_enable_clk_deassert_rst(struct device *dev, struct starfive_hdmi *hdmi)
> +{
> + int ret;
> +
> + ret = clk_prepare_enable(hdmi->sys_clk);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "Cannot enable HDMI sys clock: %d\n", ret);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(hdmi->mclk);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "Cannot enable HDMI mclk clock: %d\n", ret);
> + return ret;
> + }
> + ret = clk_prepare_enable(hdmi->bclk);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "Cannot enable HDMI bclk clock: %d\n", ret);
> + return ret;
> + }
> + ret = reset_control_deassert(hdmi->tx_rst);
> + if (ret < 0) {
> + dev_err(dev, "failed to deassert tx_rst\n");
The error paths should clk_disable_unprepare() enabled clocks.
> + return ret;
> + }
> + return 0;
> +}
> +
[...]
> +static int starfive_hdmi_get_clk_rst(struct device *dev, struct starfive_hdmi *hdmi)
> +{
> + hdmi->sys_clk = devm_clk_get(dev, "sysclk");
> + if (IS_ERR(hdmi->sys_clk)) {
> + DRM_DEV_ERROR(dev, "Unable to get HDMI sysclk clk\n");
> + return PTR_ERR(hdmi->sys_clk);
> + }
> + hdmi->mclk = devm_clk_get(dev, "mclk");
> + if (IS_ERR(hdmi->mclk)) {
> + DRM_DEV_ERROR(dev, "Unable to get HDMI mclk clk\n");
> + return PTR_ERR(hdmi->mclk);
> + }
> + hdmi->bclk = devm_clk_get(dev, "bclk");
> + if (IS_ERR(hdmi->bclk)) {
> + DRM_DEV_ERROR(dev, "Unable to get HDMI bclk clk\n");
> + return PTR_ERR(hdmi->bclk);
> + }
> + hdmi->tx_rst = reset_control_get_shared(dev, "hdmi_tx");
Use devm_reset_control_get_shared() for consistency, otherwise this is missing
a reset_control_put() somewhere.
regards
Philipp