Re: [PATCH] arm64: dts: imx8mp-venice-gw74xx: update to revB PCB

[Tim Harvey]

On Sun, Jun 4, 2023 at 5:22 PM Shawn Guo <shawnguo@xxxxxxxxxx> wrote:
>
> On Thu, Jun 01, 2023 at 12:31:12PM -0700, Tim Harvey wrote:
> > Update the imx8mp-venice-gw74xx for revB:
> >  - add CAN1
> >  - add TIS-TPM on SPI2
> >  - add FAN controller
> >  - fix PMIC I2C bus (revA PMIC I2C was non-functional so no need for
> >    backward compatible option)
> >  - M2 socket GPIO's moved
> >
> > Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
> > ---
> >  .../dts/freescale/imx8mp-venice-gw74xx.dts    | 261 +++++++++++-------
> >  1 file changed, 159 insertions(+), 102 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > index eb51d648359b..0e389ec5c2d4 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > @@ -125,12 +125,22 @@ reg_usb2_vbus: regulator-usb2 {
> >               regulator-max-microvolt = <5000000>;
> >       };
> >
> > +     reg_can1_stby: regulator-can1-stby {
> > +             compatible = "regulator-fixed";
> > +             pinctrl-names = "default";
> > +             pinctrl-0 = <&pinctrl_reg_can1>;
> > +             regulator-name = "can1_stby";
> > +             gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
> > +             regulator-min-microvolt = <3300000>;
> > +             regulator-max-microvolt = <3300000>;
> > +     };
> > +
> >       reg_can2_stby: regulator-can2-stby {
> >               compatible = "regulator-fixed";
> >               pinctrl-names = "default";
> > -             pinctrl-0 = <&pinctrl_reg_can>;
> > +             pinctrl-0 = <&pinctrl_reg_can2>;
> >               regulator-name = "can2_stby";
> > -             gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
> > +             gpio = <&gpio5 5 GPIO_ACTIVE_LOW>;
> >               regulator-min-microvolt = <3300000>;
> >               regulator-max-microvolt = <3300000>;
> >       };
> > @@ -164,6 +174,21 @@ &A53_3 {
> >       cpu-supply = <&reg_arm>;
> >  };
> >
> > +&ecspi1 {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_spi1>;
> > +     cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
> > +     status = "okay";
> > +
> > +     tpm@0 {
> > +             compatible = "tcg,tpm_tis-spi";
> > +             #address-cells = <0x1>;
> > +             #size-cells = <0x1>;
> > +             reg = <0x0>;
> > +             spi-max-frequency = <36000000>;
> > +     };
> > +};
> > +
> >  /* off-board header */
> >  &ecspi2 {
> >       pinctrl-names = "default";
> > @@ -204,6 +229,13 @@ fixed-link {
> >       };
> >  };
> >
> > +&flexcan1 {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_flexcan1>;
> > +     xceiver-supply = <&reg_can1_stby>;
> > +     status = "okay";
> > +};
> > +
> >  &flexcan2 {
> >       pinctrl-names = "default";
> >       pinctrl-0 = <&pinctrl_flexcan2>;
> > @@ -214,38 +246,38 @@ &flexcan2 {
> >  &gpio1 {
> >       gpio-line-names =
> >               "", "", "", "", "", "", "", "",
> > -             "", "", "dio0", "", "dio1", "", "", "",
> > +             "", "dio0", "", "dio1", "", "", "", "",
> >               "", "", "", "", "", "", "", "",
> >               "", "", "", "", "", "", "", "";
> >  };
> >
> >  &gpio2 {
> >       gpio-line-names =
> > -             "", "", "", "", "", "", "", "",
> > -             "", "", "", "", "", "", "pcie3_wdis#", "",
> > +             "", "", "", "", "", "", "m2_pin20", "",
> > +             "", "", "", "", "", "pcie1_wdis#", "pcie3_wdis#", "",
> >               "", "", "pcie2_wdis#", "", "", "", "", "",
> >               "", "", "", "", "", "", "", "";
> >  };
> >
> >  &gpio3 {
> >       gpio-line-names =
> > -             "m2_gdis#", "", "", "", "", "", "", "m2_rst#",
> > +             "", "", "", "", "", "", "m2_rst", "",
> > +             "", "", "", "", "", "", "", "",
> >               "", "", "", "", "", "", "", "",
> > -             "m2_off#", "", "", "", "", "", "", "",
> >               "", "", "", "", "", "", "", "";
> >  };
> >
> >  &gpio4 {
> >       gpio-line-names =
> > +             "", "", "m2_off#", "", "", "", "", "",
> >               "", "", "", "", "", "", "", "",
> > -             "", "", "", "", "", "", "", "",
> > -             "", "", "", "", "m2_wdis#", "", "", "",
> > -             "", "", "", "", "", "", "", "uart_rs485";
> > +             "", "", "m2_wdis#", "", "", "", "", "",
> > +             "", "", "", "", "", "", "", "rs485_en";
> >  };
> >
> >  &gpio5 {
> >       gpio-line-names =
> > -             "uart_half", "uart_term", "", "", "", "", "", "",
> > +             "rs485_hd", "rs485_term", "", "", "", "", "", "",
> >               "", "", "", "", "", "", "", "",
> >               "", "", "", "", "", "", "", "",
> >               "", "", "", "", "", "", "", "";
> > @@ -286,6 +318,12 @@ channel@8 {
> >                               label = "vdd_bat";
> >                       };
> >
> > +                     channel@16 {
> > +                             gw,mode = <4>;
> > +                             reg = <0x16>;
> > +                             label = "fan_tach";
> > +                     };
> > +
> >                       channel@82 {
> >                               gw,mode = <2>;
> >                               reg = <0x82>;
> > @@ -358,6 +396,11 @@ channel@a2 {
> >                               gw,voltage-divider-ohms = <10000 10000>;
> >                       };
> >               };
> > +
> > +             fan-controller@0 {
>
> The unit-address doesn't match 'reg' property below.
>
> Shawn
>

Shawn,

Thanks - I'll fix this in v2

Best Regards,

Tim