[PATCH RFC 3/4] input: touchscreen: add I2C support for Goodix Berlin Touchscreen IC

[Neil Armstrong]

Add initial support for the new Goodix "Berlin" touchscreen ICs
over the I2C interface.

This initial driver is derived from the Goodix goodix_ts_berlin
available at [1] and [2] and only supports the GT9916 IC
present on the Qualcomm SM8550 MTP & QRD touch panel.

The current implementation only supports BerlinD, aka GT9916.

[1] https://github.com/goodix/goodix_ts_berlin
[2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 drivers/input/touchscreen/Kconfig             | 14 +++++
 drivers/input/touchscreen/Makefile            |  1 +
 drivers/input/touchscreen/goodix_berlin_i2c.c | 76 +++++++++++++++++++++++++++
 3 files changed, 91 insertions(+)

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1a6f6f6da991..da6d5d75c42d 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -421,6 +421,20 @@ config TOUCHSCREEN_GOODIX_BERLIN_CORE
 	depends on REGMAP
 	tristate
 
+config TOUCHSCREEN_GOODIX_BERLIN_I2C
+	tristate "Goodix Berlin I2C touchscreen"
+	depends on I2C
+	depends on REGMAP_I2C
+	select TOUCHSCREEN_GOODIX_BERLIN_CORE
+	help
+	  Say Y here if you have the a touchscreen connected to your
+	  system using the Goodix Berlin IC connection via I2C.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called goodix_berlin_i2c.
+
 config TOUCHSCREEN_HIDEEP
 	tristate "HiDeep Touch IC"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 29cdb042e104..921a2da0c2be 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_EXC3000)	+= exc3000.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE)	+= goodix_berlin_core.o
+obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C)	+= goodix_berlin_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_HIDEEP)	+= hideep.o
 obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX)	+= hynitron_cstxxx.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
diff --git a/drivers/input/touchscreen/goodix_berlin_i2c.c b/drivers/input/touchscreen/goodix_berlin_i2c.c
new file mode 100644
index 000000000000..fc32b8077287
--- /dev/null
+++ b/drivers/input/touchscreen/goodix_berlin_i2c.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Goodix Berlin Touchscreen Driver
+ *
+ * Copyright (C) 2020 - 2021 Goodix, Inc.
+ * Copyright (C) 2023 Linaro Ltd.
+ *
+ * Based on goodix_ts_berlin driver.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <asm/unaligned.h>
+
+#include "goodix_berlin.h"
+
+#define I2C_MAX_TRANSFER_SIZE		256
+
+static const struct regmap_config goodix_berlin_i2c_regmap_conf = {
+	.reg_bits = 32,
+	.val_bits = 8,
+	.max_raw_read = I2C_MAX_TRANSFER_SIZE,
+	.max_raw_write = I2C_MAX_TRANSFER_SIZE,
+};
+
+static const struct input_id goodix_berlin_i2c_input_id = {
+	.bustype = BUS_I2C,
+	.vendor = 0x0416,
+	.product = 0x1001,
+};
+
+static int goodix_berlin_i2c_probe(struct i2c_client *client)
+{
+	struct regmap *map;
+
+	map = devm_regmap_init_i2c(client, &goodix_berlin_i2c_regmap_conf);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	return goodix_berlin_probe(&client->dev, client->irq,
+				   &goodix_berlin_i2c_input_id, map);
+}
+
+static void goodix_berlin_i2c_remove(struct i2c_client *client)
+{
+	goodix_berlin_remove(&client->dev);
+}
+
+static const struct i2c_device_id goodix_berlin_i2c_id[] = {
+	{ "gt9916", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id);
+
+static const struct of_device_id goodix_berlin_i2c_of_match[] = {
+	{ .compatible = "goodix,gt9916", },
+	{ },
+};
+
+static struct i2c_driver goodix_berlin_i2c_driver = {
+	.driver = {
+		.name = "goodix-berlin-i2c",
+		.of_match_table = goodix_berlin_i2c_of_match,
+		.pm = pm_sleep_ptr(&goodix_berlin_pm_ops),
+	},
+	.probe = goodix_berlin_i2c_probe,
+	.remove = goodix_berlin_i2c_remove,
+	.id_table = goodix_berlin_i2c_id,
+};
+module_i2c_driver(goodix_berlin_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Goodix Berlin I2C Touchscreen driver");
+MODULE_AUTHOR("Neil Armstrong <neil.armstrong@xxxxxxxxxx>");

-- 
2.34.1