[PATCH V1 1/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support

From: Chevron Li
Date: Tue Jun 06 2023 - 22:05:21 EST

Next message: Jiasheng Jiang: "[PATCH] drm: xlnx: zynqmp_dpsub: Add missing check for dma_set_mask"
Previous message: Mason Huo: "Re: [PATCH v4 2/3] cpufreq: dt-platdev: Add JH7110 SOC to the allowlist"
Next in thread: Chevron Li: "[PATCH V1 2/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Chevron Li <chevron.li@xxxxxxxxxxxxxx>

Add Bayhub new chip GG8 support for USHI function

Signed-off-by: Chevron Li <chevron.li@xxxxxxxxxxxxxx>
---
Change in V1:
1.Add GG8 chip IDs in sdhci-pci-core.c and sdhci-pci.h
2.Add GG8 chip initialization flow at sdhci-pci-o2micro.c
---
drivers/mmc/host/sdhci-pci-core.c | 4 +
drivers/mmc/host/sdhci-pci-o2micro.c | 154 ++++++++++++++++++++-------
drivers/mmc/host/sdhci-pci.h | 4 +
3 files changed, 126 insertions(+), 36 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 01975d145200..1d14300691f4 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1898,6 +1898,10 @@ static const struct pci_device_id pci_ids[] = {
SDHCI_PCI_DEVICE(O2, SDS1, o2),
SDHCI_PCI_DEVICE(O2, SEABIRD0, o2),
SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
+ SDHCI_PCI_DEVICE(O2, GG8_9860, o2),
+ SDHCI_PCI_DEVICE(O2, GG8_9861, o2),
+ SDHCI_PCI_DEVICE(O2, GG8_9862, o2),
+ SDHCI_PCI_DEVICE(O2, GG8_9863, o2),
SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index 620f52ad9667..8243a63b3c81 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -36,6 +36,7 @@
#define O2_SD_INF_MOD 0xF1
#define O2_SD_MISC_CTRL4 0xFC
#define O2_SD_MISC_CTRL 0x1C0
+#define O2_SD_EXP_INT_REG 0x1E0
#define O2_SD_PWR_FORCE_L0 0x0002
#define O2_SD_TUNING_CTRL 0x300
#define O2_SD_PLL_SETTING 0x304
@@ -49,6 +50,9 @@
#define O2_SD_UHS2_L1_CTRL 0x35C
#define O2_SD_FUNC_REG3 0x3E0
#define O2_SD_FUNC_REG4 0x3E4
+#define O2_SD_PARA_SET_REG1 0x444
+#define O2_SD_VDDX_CTRL_REG 0x508
+#define O2_SD_GPIO_CTRL_REG1 0x510
#define O2_SD_LED_ENABLE BIT(6)
#define O2_SD_FREG0_LEDOFF BIT(13)
#define O2_SD_SEL_DLL BIT(16)
@@ -334,33 +338,45 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
scratch |= O2_SD_PWR_FORCE_L0;
sdhci_writew(host, scratch, O2_SD_MISC_CTRL);

- /* Stop clk */
- reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
- reg_val &= ~SDHCI_CLOCK_CARD_EN;
- sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
-
- if ((host->timing == MMC_TIMING_MMC_HS200) ||
- (host->timing == MMC_TIMING_UHS_SDR104)) {
- /* UnLock WP */
- pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
- scratch_8 &= 0x7f;
- pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
-
- /* Set pcr 0x354[16] to choose dll clock, and set the default phase */
- pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &reg_val);
- reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
- reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE);
- pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val);
+ /* Update output phase */
+ switch (chip->pdev->device) {
+ case PCI_DEVICE_ID_O2_SDS0:
+ case PCI_DEVICE_ID_O2_SEABIRD0:
+ case PCI_DEVICE_ID_O2_SEABIRD1:
+ case PCI_DEVICE_ID_O2_SDS1:
+ case PCI_DEVICE_ID_O2_FUJIN2:
+ /* Stop clk */
+ reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ reg_val &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
+
+ if ((host->timing == MMC_TIMING_MMC_HS200) ||
+ (host->timing == MMC_TIMING_UHS_SDR104)) {
+ /* UnLock WP */
+ pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+ scratch_8 &= 0x7f;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+
+ /* Set pcr 0x354[16] to choose dll clock, and set the default phase */
+ pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &reg_val);
+ reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
+ reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE);
+ pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val);
+
+ /* Lock WP */
+ pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+ scratch_8 |= 0x80;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+ }

- /* Lock WP */
- pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
- scratch_8 |= 0x80;
- pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+ /* Start clk */
+ reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ reg_val |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
+ break;
+ default:
+ break;
}
- /* Start clk */
- reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
- reg_val |= SDHCI_CLOCK_CARD_EN;
- sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);

/* wait DLL lock, timeout value 5ms */
if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
@@ -563,6 +579,7 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
u16 clk;
u8 scratch;
u32 scratch_32;
+ u32 dmdn_208m, dmdn_200m;
struct sdhci_pci_slot *slot = sdhci_priv(host);
struct sdhci_pci_chip *chip = slot->chip;

@@ -578,16 +595,27 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);

+ if ((chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9860) ||
+ (chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9861) ||
+ (chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9862) ||
+ (chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9863)) {
+ dmdn_208m = 0x2c500000;
+ dmdn_200m = 0x25200000;
+ } else {
+ dmdn_208m = 0x2c280000;
+ dmdn_200m = 0x25100000;
+ }
+
if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);

- if ((scratch_32 & 0xFFFF0000) != 0x2c280000)
- o2_pci_set_baseclk(chip, 0x2c280000);
+ if ((scratch_32 & 0xFFFF0000) != dmdn_208m)
+ o2_pci_set_baseclk(chip, dmdn_208m);
} else {
pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);

- if ((scratch_32 & 0xFFFF0000) != 0x25100000)
- o2_pci_set_baseclk(chip, 0x25100000);
+ if ((scratch_32 & 0xFFFF0000) != dmdn_200m)
+ o2_pci_set_baseclk(chip, dmdn_200m);
}

pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
@@ -624,6 +652,11 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
if (caps & SDHCI_CAN_DO_8BIT)
host->mmc->caps |= MMC_CAP_8_BIT_DATA;

+ host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50;
+
+ sdhci_pci_o2_enable_msi(chip, host);
+
+ host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;
switch (chip->pdev->device) {
case PCI_DEVICE_ID_O2_SDS0:
case PCI_DEVICE_ID_O2_SEABIRD0:
@@ -634,10 +667,6 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
if (reg & 0x1)
host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;

- host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50;
-
- sdhci_pci_o2_enable_msi(chip, host);
-
if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) {
ret = pci_read_config_dword(chip->pdev,
O2_SD_MISC_SETTING, &reg);
@@ -663,15 +692,21 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
}

- host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;
-
if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
break;
/* set dll watch dog timer */
reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
reg |= (1 << 12);
sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
-
+ break;
+ case PCI_DEVICE_ID_O2_GG8_9860:
+ case PCI_DEVICE_ID_O2_GG8_9861:
+ case PCI_DEVICE_ID_O2_GG8_9862:
+ case PCI_DEVICE_ID_O2_GG8_9863:
+ host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ host->mmc->caps |= MMC_CAP_HW_RESET;
+ host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+ slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
break;
default:
break;
@@ -684,6 +719,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
{
int ret;
u8 scratch;
+ u16 scratch16;
u32 scratch_32;

switch (chip->pdev->device) {
@@ -885,6 +921,52 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
scratch_32 |= 0x00180000;
pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL2, scratch_32);
pci_write_config_dword(chip->pdev, O2_SD_DETECT_SETTING, 1);
+ /* Lock WP */
+ ret = pci_read_config_byte(chip->pdev,
+ O2_SD_LOCK_WP, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x80;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+ break;
+ case PCI_DEVICE_ID_O2_GG8_9860:
+ case PCI_DEVICE_ID_O2_GG8_9861:
+ case PCI_DEVICE_ID_O2_GG8_9862:
+ case PCI_DEVICE_ID_O2_GG8_9863:
+ /* UnLock WP */
+ ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+ if (ret)
+ return ret;
+ scratch &= 0x7f;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+ /* Select mode switch source as software control */
+ pci_read_config_word(chip->pdev,
+ O2_SD_PARA_SET_REG1, &scratch16);
+ scratch16 &= 0xF8FF;
+ scratch16 |= BIT(9);
+ pci_write_config_word(chip->pdev,
+ O2_SD_PARA_SET_REG1, scratch16);
+
+ /* set VDD1 supply source */
+ pci_read_config_word(chip->pdev,
+ O2_SD_VDDX_CTRL_REG, &scratch16);
+ scratch16 &= 0xFFE3;
+ scratch16 |= BIT(3);
+ pci_write_config_word(chip->pdev,
+ O2_SD_VDDX_CTRL_REG, scratch16);
+
+ /* Set host drive strength*/
+ scratch16 = 0x0025;
+ pci_write_config_word(chip->pdev,
+ O2_SD_PLL_SETTING, scratch16);
+
+ /* Set output delay*/
+ pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
+ scratch_32 &= 0xFF0FFF00;
+ scratch_32 |= 0x00B0003B;
+ pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
+
/* Lock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 3661a224fb04..d680a030f3bf 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -11,6 +11,10 @@
#define PCI_DEVICE_ID_O2_FUJIN2 0x8520
#define PCI_DEVICE_ID_O2_SEABIRD0 0x8620
#define PCI_DEVICE_ID_O2_SEABIRD1 0x8621
+#define PCI_DEVICE_ID_O2_GG8_9860 0x9860
+#define PCI_DEVICE_ID_O2_GG8_9861 0x9861
+#define PCI_DEVICE_ID_O2_GG8_9862 0x9862
+#define PCI_DEVICE_ID_O2_GG8_9863 0x9863

#define PCI_DEVICE_ID_INTEL_PCH_SDIO0 0x8809
#define PCI_DEVICE_ID_INTEL_PCH_SDIO1 0x880a

base-commit: 9e87b63ed37e202c77aa17d4112da6ae0c7c097c
--
2.25.1

Next message: Jiasheng Jiang: "[PATCH] drm: xlnx: zynqmp_dpsub: Add missing check for dma_set_mask"
Previous message: Mason Huo: "Re: [PATCH v4 2/3] cpufreq: dt-platdev: Add JH7110 SOC to the allowlist"
Next in thread: Chevron Li: "[PATCH V1 2/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]