Re: [PATCH 4/9] clk: qcom: ipq5332: Fix USB related clock defines

[Dmitry Baryshkov]

On 07/06/2023 13:56, Varadarajan Narayanan wrote:
> Fix the USB related clock defines and add details
> referenced by them
>
> Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> ---
>   drivers/clk/qcom/gcc-ipq5332.c | 34 +++++++++++++++++++++++-----------
>   1 file changed, 23 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
> index a75ab88..2b58558 100644
> --- a/drivers/clk/qcom/gcc-ipq5332.c
> +++ b/drivers/clk/qcom/gcc-ipq5332.c
> @@ -351,6 +351,16 @@ static const struct freq_tbl ftbl_gcc_adss_pwm_clk_src[] = {
>   	{ }
>   };
>   
> +static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = {
> +	{ .fw_name = "usb3phy_0_cc_pipe_clk" },
> +	{ .fw_name = "xo" },

gcc-ipq5332 uses DT indices, please don't mix that with .fw_name.

> +};
> +
> +static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = {
> +	{ P_USB3PHY_0_PIPE, 0 },
> +	{ P_XO, 2 },
> +};
> +
>   static struct clk_rcg2 gcc_adss_pwm_clk_src = {
>   	.cmd_rcgr = 0x1c004,
>   	.mnd_width = 0,
> @@ -1101,16 +1111,18 @@ static struct clk_rcg2 gcc_usb0_mock_utmi_clk_src = {
>   	},
>   };
>   
> -static struct clk_regmap_phy_mux gcc_usb0_pipe_clk_src = {
> +static struct clk_regmap_mux usb0_pipe_clk_src = {
>   	.reg = 0x2c074,
> +	.shift = 8,
> +	.width = 2,
> +	.parent_map = gcc_usb3phy_0_cc_pipe_clk_xo_map,
>   	.clkr = {
> -		.hw.init = &(struct clk_init_data) {
> -			.name = "gcc_usb0_pipe_clk_src",
> -			.parent_data = &(const struct clk_parent_data) {
> -				.index = DT_USB_PCIE_WRAPPER_PIPE_CLK,
> -			},
> -			.num_parents = 1,
> -			.ops = &clk_regmap_phy_mux_ops,
> +		.hw.init = &(const struct clk_init_data){
> +			.name = "usb0phy_0_cc_pipe_clk_src",
> +			.parent_data = gcc_usb3phy_0_cc_pipe_clk_xo,
> +			.num_parents = 2,
> +			.ops = &clk_regmap_mux_closest_ops,
> +			.flags = CLK_SET_RATE_PARENT,
>   		},

Soo... As you are reverting this. Is USB0 PIPE clock required to be 
parked to the XO? I was going to write 'before turning USB0_GDSC' off, 
but then I noticed that gcc-ipq5332 doesn't declare GDSCs. Does this 
platform have GDSCs?

>   	},
>   };
> @@ -3041,8 +3053,8 @@ static struct clk_branch gcc_usb0_pipe_clk = {
>   		.enable_mask = BIT(0),
>   		.hw.init = &(const struct clk_init_data) {
>   			.name = "gcc_usb0_pipe_clk",
> -			.parent_hws = (const struct clk_hw*[]) {
> -				&gcc_usb0_pipe_clk_src.clkr.hw,
> +			.parent_names = (const char *[]){
> +				"usb0_pipe_clk_src"

complete and definitive NAK. Do not use parent_names, we have just 
stopped migrating from them.

>   			},
>   			.num_parents = 1,
>   			.flags = CLK_SET_RATE_PARENT,
> @@ -3580,7 +3592,7 @@ static struct clk_regmap *gcc_ipq5332_clocks[] = {
>   	[GCC_PCIE3X2_PIPE_CLK_SRC] = &gcc_pcie3x2_pipe_clk_src.clkr,
>   	[GCC_PCIE3X1_0_PIPE_CLK_SRC] = &gcc_pcie3x1_0_pipe_clk_src.clkr,
>   	[GCC_PCIE3X1_1_PIPE_CLK_SRC] = &gcc_pcie3x1_1_pipe_clk_src.clkr,
> -	[GCC_USB0_PIPE_CLK_SRC] = &gcc_usb0_pipe_clk_src.clkr,
> +	[GCC_USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr,
>   };
>   
>   static const struct qcom_reset_map gcc_ipq5332_resets[] = {

--
With best wishes
Dmitry