[PATCH 1/2] net: phy: broadcom: Rename LED registers

[Florian Fainelli]

These registers are common to most PHYs and are not specific to the
BCM5482, renamed the constants accordingly, no functional change.

Signed-off-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
---
 drivers/net/phy/broadcom.c | 10 +++++-----
 include/linux/brcmphy.h    |  6 +++---
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 822c8b01dc53..57a865aa1fe5 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -414,13 +414,13 @@ static int bcm54xx_config_init(struct phy_device *phydev)
 	 * these settings will cause LOS to malfunction.
 	 */
 	if (!phy_on_sfp(phydev)) {
-		val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) |
-			BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1);
-		bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
+		val = BCM54XX_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) |
+			BCM54XX_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1);
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_LEDS1, val);
 
 		val = BCM_LED_MULTICOLOR_IN_PHASE |
-			BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
-			BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
+			BCM54XX_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
+			BCM54XX_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
 		bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
 	}
 
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 251833ab271f..ab21b8a1b2c8 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -206,11 +206,11 @@
 #define  BCM_NO_ANEG_APD_EN		0x0060 /* bits 5 & 6 */
 #define  BCM_APD_SINGLELP_EN	0x0100 /* Bit 8 */
 
-#define BCM5482_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
+#define BCM54XX_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
 					/* LED3 / ~LINKSPD[2] selector */
-#define BCM5482_SHD_LEDS1_LED3(src)	((src & 0xf) << 4)
+#define BCM54XX_SHD_LEDS1_LED3(src)	((src & 0xf) << 4)
 					/* LED1 / ~LINKSPD[1] selector */
-#define BCM5482_SHD_LEDS1_LED1(src)	((src & 0xf) << 0)
+#define BCM54XX_SHD_LEDS1_LED1(src)	((src & 0xf) << 0)
 #define BCM54XX_SHD_RGMII_MODE	0x0b	/* 01011: RGMII Mode Selector */
 #define BCM5482_SHD_SSD		0x14	/* 10100: Secondary SerDes control */
 #define BCM5482_SHD_SSD_LEDM	0x0008	/* SSD LED Mode enable */
-- 
2.34.1

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature