Re: [PATCH 03/26] phy: qcom: add the SGMII SerDes PHY driver

From: Konrad Dybcio
Date: Mon Jun 12 2023 - 06:04:00 EST




On 12.06.2023 11:23, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Implement support for the SGMII/SerDes PHY present on various Qualcomm
> platforms.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> +static const struct regmap_config qcom_dwmac_sgmii_phy_regmap_cfg = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .use_relaxed_mmio = true,
> + .disable_locking = true,
The last two are rather brave, no?

Konrad
> +};
> +
> +static int qcom_dwmac_sgmii_phy_probe(struct platform_device *pdev)
> +{
> + struct qcom_dwmac_sgmii_phy_data *data;
> + struct device *dev = &pdev->dev;
> + struct phy_provider *provider;
> + struct clk *refclk;
> + void __iomem *base;
> + struct phy *phy;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + data->regmap = devm_regmap_init_mmio(dev, base,
> + &qcom_dwmac_sgmii_phy_regmap_cfg);
> + if (IS_ERR(data->regmap))
> + return PTR_ERR(data->regmap);
> +
> + phy = devm_phy_create(dev, NULL, &qcom_dwmac_sgmii_phy_ops);
> + if (IS_ERR(phy))
> + return PTR_ERR(phy);
> +
> + refclk = devm_clk_get_enabled(dev, "sgmi_ref");
> + if (IS_ERR(refclk))
> + return PTR_ERR(refclk);
> +
> + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(provider))
> + return PTR_ERR(provider);
> +
> + phy_set_drvdata(phy, data);
> + platform_set_drvdata(pdev, data);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id qcom_dwmac_sgmii_phy_of_match[] = {
> + { .compatible = "qcom,sa8775p-dwmac-sgmii-phy" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_dwmac_sgmii_phy_of_match);
> +
> +static struct platform_driver qcom_dwmac_sgmii_phy_driver = {
> + .probe = qcom_dwmac_sgmii_phy_probe,
> + .driver = {
> + .name = "qcom-dwmac-sgmii-phy",
> + .of_match_table = qcom_dwmac_sgmii_phy_of_match,
> + }
> +};
> +
> +module_platform_driver(qcom_dwmac_sgmii_phy_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm DWMAC SGMII PHY driver");
> +MODULE_LICENSE("GPL");