[PATCH] arm: dts: Enable device-tree overlay support for AT91 boards
From: cristian.birsan
Date: Fri Jun 16 2023 - 11:30:10 EST
From: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
Add the '-@' DTC option for AT91 boards that have device-tree overlays.
This option populates the '__symbols__' node that contains all the
necessary symbols for supporting device-tree overlays (from bootloader)
on these devices.
This change increases the size of the resulting DTB with ~30%-40%. Below
are the measurements performed v6.4-rc6:
at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes
at91-sam9x60ek.dtb 30867 -> 39609 bytes
at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes
at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes
at91-sama5d2_icp.dtb 27521 -> 36155 bytes
at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes
at91-sama5d2_xplained.dtb 27262 -> 35326 bytes
at91-sama5d3_eds.dtb 27924 -> 39939 bytes
at91-sama5d3_xplained.dtb 28400 -> 40650 bytes
at91-sama5d4_xplained.dtb 26456 -> 36107 bytes
at91-sama7g5ek.dtb 29212 -> 37289 bytes
Signed-off-by: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59829fc90315..38b82af2bf69 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -50,9 +50,21 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sam9x60_curiosity := -@
+DTC_FLAGS_at91-sam9x60ek := -@
dtb-$(CONFIG_SOC_SAM9X60) += \
at91-sam9x60_curiosity.dtb \
at91-sam9x60ek.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sama5d27_som1_ek := -@
+DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@
+DTC_FLAGS_at91-sama5d2_icp := -@
+DTC_FLAGS_at91-sama5d2_ptc_ek := -@
+DTC_FLAGS_at91-sama5d2_xplained := -@
+DTC_FLAGS_at91-sama5d3_eds := -@
+DTC_FLAGS_at91-sama5d3_xplained := -@
+DTC_FLAGS_at91-sama5d4_xplained := -@
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2-2.dtb \
at91-kizbox3-hs.dtb \
@@ -79,6 +91,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
at91-sama5d4_xplained.dtb \
at91-sama5d4ek.dtb \
at91-vinco.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sama7g5ek := -@
dtb-$(CONFIG_SOC_SAMA7G5) += \
at91-sama7g5ek.dtb
dtb-$(CONFIG_SOC_SP7021) += \
--
2.34.1