[PATCH v4 1/6] soc: qcom: pmic_glink_altmode: handle safe mode when disconnect

[Neil Armstrong]

On some Qcom SoCs, the Altmode event mode is set to 0xff when
the Type-C port is disconnected.

Handle this specific mode and translate it as the SAFE mode.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 drivers/soc/qcom/pmic_glink_altmode.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/pmic_glink_altmode.c b/drivers/soc/qcom/pmic_glink_altmode.c
index df48fbea4b68..007d308e2f15 100644
--- a/drivers/soc/qcom/pmic_glink_altmode.c
+++ b/drivers/soc/qcom/pmic_glink_altmode.c
@@ -173,6 +173,20 @@ static void pmic_glink_altmode_enable_usb(struct pmic_glink_altmode *altmode,
 		dev_err(altmode->dev, "failed to switch mux to USB\n");
 }
 
+static void pmic_glink_altmode_safe(struct pmic_glink_altmode *altmode,
+				    struct pmic_glink_altmode_port *port)
+{
+	int ret;
+
+	port->state.alt = NULL;
+	port->state.data = NULL;
+	port->state.mode = TYPEC_STATE_SAFE;
+
+	ret = typec_mux_set(port->typec_mux, &port->state);
+	if (ret)
+		dev_err(altmode->dev, "failed to switch mux to safe mode\n");
+}
+
 static void pmic_glink_altmode_worker(struct work_struct *work)
 {
 	struct pmic_glink_altmode_port *alt_port = work_to_altmode_port(work);
@@ -180,7 +194,9 @@ static void pmic_glink_altmode_worker(struct work_struct *work)
 
 	typec_switch_set(alt_port->typec_switch, alt_port->orientation);
 
-	if (alt_port->svid == USB_TYPEC_DP_SID)
+	if (alt_port->svid == USB_TYPEC_DP_SID && alt_port->mode == 0xff)
+		pmic_glink_altmode_safe(altmode, alt_port);
+	else if (alt_port->svid == USB_TYPEC_DP_SID)
 		pmic_glink_altmode_enable_dp(altmode, alt_port, alt_port->mode,
 					     alt_port->hpd_state, alt_port->hpd_irq);
 	else

-- 
2.34.1