[PATCH v4 1/2] dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5

[Julien Stephan]

From: Florian Sylvestre <fsylvestre@xxxxxxxxxxxx>

This adds the bindings, for the MIPI CD-PHY module v0.5 embedded in
some Mediatek soc, such as the mt8365

Signed-off-by: Florian Sylvestre <fsylvestre@xxxxxxxxxxxx>
Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx>
---
 .../bindings/phy/mediatek,mt8365-csi-rx.yaml  | 79 +++++++++++++++++++
 MAINTAINERS                                   |  6 ++
 2 files changed, 85 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml

diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
new file mode 100644
index 000000000000..2127a5732f73
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek, BayLibre
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Sensor Interface MIPI CSI CD-PHY
+
+maintainers:
+  - Julien Stephan <jstephan@xxxxxxxxxxxx>
+  - Andy Hsieh <andy.hsieh@xxxxxxxxxxxx>
+
+description:
+  The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2
+  receivers. The number of PHYs depends on the SoC model.
+  Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only
+  capable.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8365-csi-rx
+
+  reg:
+    maxItems: 1
+
+  num-lanes:
+    enum: [2, 3, 4]
+
+  '#phy-cells':
+    enum: [0, 1]
+    description: |
+      If the PHY doesn't support mode selection then #phy-cells must be 0 and
+      PHY mode is described using phy-type property.
+      If the PHY supports mode selection, then #phy-cells must be 1 and mode
+      is set in the PHY cells. Supported modes are:
+        - PHY_TYPE_DPHY
+        - PHY_TYPE_CPHY
+      See include/dt-bindings/phy/phy.h for constants.
+
+  phy-type:
+    description:
+      If the PHY doesn't support mode selection then this set the operating mode.
+      See include/dt-bindings/phy/phy.h for constants.
+    const: 10
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - num-lanes
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      csi0_rx: phy@11c10000 {
+        compatible = "mediatek,mt8365-csi-rx";
+        reg = <0 0x11c10000 0 0x2000>;
+        num-lanes = <2>;
+        #phy-cells = <1>;
+      };
+
+      csi1_rx: phy@11c12000 {
+        compatible = "mediatek,mt8365-csi-rx";
+        reg = <0 0x11c12000 0 0x2000>;
+        phy-type = <PHY_TYPE_DPHY>;
+        num-lanes = <2>;
+        #phy-cells = <0>;
+      };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 45fc831f1654..024d67eb7a94 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13184,6 +13184,12 @@ F:	Documentation/devicetree/bindings/media/mediatek-vpu.txt
 F:	drivers/media/platform/mediatek/vcodec/
 F:	drivers/media/platform/mediatek/vpu/
 
+MEDIATEK MIPI-CSI CDPHY DRIVER
+M:	Julien Stephan <jstephan@xxxxxxxxxxxx>
+M:	Andy Hsieh <andy.hsieh@xxxxxxxxxxxx>
+S:	Supported
+F:	Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
+
 MEDIATEK MMC/SD/SDIO DRIVER
 M:	Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
 S:	Maintained
-- 
2.41.0