Re: [PATCH 1/2] arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO

[Konrad Dybcio]

On 20.06.2023 22:39, Bjorn Andersson wrote:
> The vreg_misc_3p3 regulator is controlled by PMC8280_1 GPIO 2, not 1, on
> the CRD.
> 
> Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index b566e403d1db..b21b41a066b6 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -167,7 +167,7 @@ vreg_misc_3p3: regulator-misc-3p3 {
>  		regulator-min-microvolt = <3300000>;
>  		regulator-max-microvolt = <3300000>;
>  
> -		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
> +		gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  
>  		pinctrl-names = "default";
> @@ -757,7 +757,7 @@ edp_bl_reg_en: edp-bl-reg-en-state {
>  	};
>  
>  	misc_3p3_reg_en: misc-3p3-reg-en-state {
> -		pins = "gpio1";
> +		pins = "gpio2";
>  		function = "normal";
>  	};
>  };