Re: [Freedreno] [PATCH 1/3] drm/msm/dpu: Add DPU_INTF_DATABUS_WIDEN feature flag for DPU >= 5.0
From: Jessica Zhang
Date: Tue Jun 20 2023 - 19:38:09 EST
On 6/20/2023 3:11 PM, Dmitry Baryshkov wrote:
On Wed, 21 Jun 2023 at 00:37, Jessica Zhang <quic_jesszhan@xxxxxxxxxxx> wrote:
On 6/16/2023 5:37 PM, Dmitry Baryshkov wrote:
On 17/06/2023 00:10, Abhinav Kumar wrote:
On 6/14/2023 1:43 PM, Dmitry Baryshkov wrote:
On 14/06/2023 23:39, Abhinav Kumar wrote:
On 6/14/2023 12:54 PM, Abhinav Kumar wrote:
On 6/14/2023 12:35 PM, Abhinav Kumar wrote:
On 6/14/2023 5:23 AM, Marijn Suijten wrote:
On 2023-06-14 15:01:59, Dmitry Baryshkov wrote:
On 14/06/2023 14:42, Marijn Suijten wrote:
On 2023-06-13 18:57:11, Jessica Zhang wrote:
DPU 5.x+ supports a databus widen mode that allows more data
to be sent
per pclk. Enable this feature flag on all relevant chipsets.
Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 3 ++-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 36ba3f58dcdf..0be7bf0bfc41 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -103,7 +103,8 @@
(BIT(DPU_INTF_INPUT_CTRL) | \
BIT(DPU_INTF_TE) | \
BIT(DPU_INTF_STATUS_SUPPORTED) | \
- BIT(DPU_DATA_HCTL_EN))
+ BIT(DPU_DATA_HCTL_EN) | \
+ BIT(DPU_INTF_DATABUS_WIDEN))
This doesn't work. DPU 5.0.0 is SM8150, which has DSI 6G 2.3.
In the
last patch for DSI you state and enable widebus for DSI 6G 2.5+
only,
meaning DPU and DSI are now desynced, and the output is completely
corrupted.
I looked at the internal docs and also this change. This change is
incorrect because this will try to enable widebus for DPU >= 5.0 and
DSI >= 2.5
That was not the intended right condition as thats not what the docs
say.
We should enable for DPU >= 7.0 and DSI >= 2.5
Is there any combination where this compatibility is broken? That
would be the strange thing for me ( not DPU 5.0 and DSI 2.5 as that
was incorrect)
Part of this confusion is because of catalog macro re-use again.
This series is a good candidate and infact I think we should only do
core_revision based check on DPU and DSI to avoid bringing the
catalog mess into this.
I have just a single request here: can we please have the same
approach for both DSI and DP? I don't mind changing DP code if it
makes it better. If you don't have better reasons, I like the idea of
DSI/DP dictating whether wide bus should be used on the particular
interface. It allows us to handle possible errata or corner cases
there. Another option would be to make DPU tell DSI / DP whether the
wide bus is enabled or not, but I'd say, this is slightly worse
solution.
Today, DP's widebus does not check if DPU supports that or not.
DPU encoder queries the DP whether widebus is available and enables it.
We can also do the same thing for DSI.
So for intf_type of DSI, DPU encoder will query DSI if it supports
widebus.
Not if it supports wide bus. But the check is whether enabling wide bus
is requested by the output driver (DSI/DP).
Hi Dmitry,
Can you explain what you mean by "requested by output driver"? FWIW, if
the DSI version supports wide bus && if DSC is enabled, then wide bus
will be enabled in DSI.
Like for DP, let DSI select whether a wide bus should be enabled or
not, then let DPU get this flag from DSI.
Got it -- so basically have DSI do the version check *and* the DSC check
in some `msm_dsi_is_widebus_enabled()` helper and have DPU use that
helper to check if widebus is enabled.
I think that should be fine.
Thanks,
Jessica Zhang
Thanks,
Jessica Zhang
Then DSI will do its version checks and for DSC it will say yes.
This way, we will never check for the DPU's core revision for DSI and
purely rely of DP/DSI's hw revisions.
Thats fine with me because that way we again just rely on the hw
revision to enable the feature.
But as a result I am still going to drop this patch which adds widebus
to the catalog as a dpu cap which I always wanted to do anyway as we
will just rely on the DSI and DP hw revisions.
Yep.
Tested this on SM8350 which actually has DSI 2.5, and it is also
corrupted with this series so something else on this series might be
broken.
Missed this response. That seems strange.
This series was tested on SM8350 HDK with a command mode panel.
We will fix the DPU-DSI handshake and post a v2 but your issue
needs investigation in parallel.
So another bug to track that would be great.
Is the bound in dsi_host wrong, or do DPU and DSI need to
communicate
when widebus will be enabled, based on DPU && DSI supporting it?
I'd prefer to follow the second approach, as we did for DP. DPU
asks the
actual video output driver if widebus is to be enabled.
I was afraid of this. This series was made on an assumption that
the DPU version of widebus and DSI version of widebus would be
compatible but looks like already SM8150 is an outlier.
Yes, I think we have to go with second approach.
DPU queries DSI if it supports widebus and enables it.
Thanks for your responses. We will post a v2.
Doesn't it seem very strange that DPU 5.x+ comes with a widebus
feature,
but the DSI does not until two revisions later? Or is this
available on
every interface, but only for a different (probably DP) encoder
block?
Yes its strange.
I have clarified this above. Its not strange but appeared strange
because we were checking wrong conditions.
- Marijn
--
With best wishes
Dmitry
--
With best wishes
Dmitry