Re: [PATCH v5 2/3] phy: starfive: Add mipi dphy rx support

From: Vinod Koul
Date: Wed Jun 21 2023 - 08:30:28 EST

On 29-05-23, 05:15, Changhuang Liang wrote:
> Add mipi dphy rx support for the StarFive JH7110 SoC. It is used to
> transfer CSI camera data.
>
> Signed-off-by: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
> ---
> MAINTAINERS | 7 +
> drivers/phy/Kconfig | 1 +
> drivers/phy/Makefile | 1 +
> drivers/phy/starfive/Kconfig | 13 +
> drivers/phy/starfive/Makefile | 2 +
> drivers/phy/starfive/phy-starfive-dphy-rx.c | 300 ++++++++++++++++++++
> 6 files changed, 324 insertions(+)
> create mode 100644 drivers/phy/starfive/Kconfig
> create mode 100644 drivers/phy/starfive/Makefile
> create mode 100644 drivers/phy/starfive/phy-starfive-dphy-rx.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 92c7076c4fed..a5fac3f015b4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20092,6 +20092,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
> F: drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
>
> +STARFIVE JH7110 DPHY RX DRIVER
> +M: Jack Zhu <jack.zhu@xxxxxxxxxxxxxxxx>
> +M: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
> +S: Supported
> +F: Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
> +F: drivers/phy/starfive/phy-starfive-dphy-rx.c
> +
> STARFIVE JH7110 MMC/SD/SDIO DRIVER
> M: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
> S: Supported
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index f46e3148d286..0000149edbc4 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -91,6 +91,7 @@ source "drivers/phy/rockchip/Kconfig"
> source "drivers/phy/samsung/Kconfig"
> source "drivers/phy/socionext/Kconfig"
> source "drivers/phy/st/Kconfig"
> +source "drivers/phy/starfive/Kconfig"
> source "drivers/phy/sunplus/Kconfig"
> source "drivers/phy/tegra/Kconfig"
> source "drivers/phy/ti/Kconfig"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 54f312c10a40..fb3dc9de6111 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -31,6 +31,7 @@ obj-y += allwinner/ \
> samsung/ \
> socionext/ \
> st/ \
> + starfive/ \
> sunplus/ \
> tegra/ \
> ti/ \
> diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
> new file mode 100644
> index 000000000000..f989b8ff8bcb
> --- /dev/null
> +++ b/drivers/phy/starfive/Kconfig
> @@ -0,0 +1,13 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Phy drivers for StarFive platforms
> +#
> +
> +config PHY_STARFIVE_DPHY_RX
> + tristate "StarFive D-PHY RX Support"
> + select GENERIC_PHY
> + select GENERIC_PHY_MIPI_DPHY
> + help
> + Choose this option if you have a StarFive D-PHY in your
> + system. If M is selected, the module will be called
> + phy-starfive-dphy-rx.
> diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
> new file mode 100644
> index 000000000000..7ec576cb30ae
> --- /dev/null
> +++ b/drivers/phy/starfive/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_PHY_STARFIVE_DPHY_RX) += phy-starfive-dphy-rx.o
> diff --git a/drivers/phy/starfive/phy-starfive-dphy-rx.c b/drivers/phy/starfive/phy-starfive-dphy-rx.c
> new file mode 100644
> index 000000000000..6974ed904d0d
> --- /dev/null
> +++ b/drivers/phy/starfive/phy-starfive-dphy-rx.c
> @@ -0,0 +1,300 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * DPHY driver for the StarFive JH7110 SoC
> + *
> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +
> +#define STF_DPHY_APBCFGSAIF_SYSCFG(x) (x)
> +
> +#define STF_DPHY_DA_CDPHY_R100_CTRL0_2D1C_EFUSE_EN BIT(6)
> +#define STF_DPHY_DA_CDPHY_R100_CTRL0_2D1C_EFUSE_IN GENMASK(12, 7)
> +#define STF_DPHY_DA_CDPHY_R100_CTRL1_2D1C_EFUSE_EN BIT(19)
> +#define STF_DPHY_DA_CDPHY_R100_CTRL1_2D1C_EFUSE_IN GENMASK(25, 20)
> +
> +#define STF_DPHY_DATA_BUS16_8 BIT(8)
> +#define STF_DPHY_DEBUG_MODE_SEL GENMASK(15, 9)
> +
> +#define STF_DPHY_ENABLE_CLK BIT(6)
> +#define STF_DPHY_ENABLE_CLK1 BIT(7)
> +#define STF_DPHY_ENABLE_LAN0 BIT(8)
> +#define STF_DPHY_ENABLE_LAN1 BIT(9)
> +#define STF_DPHY_ENABLE_LAN2 BIT(10)
> +#define STF_DPHY_ENABLE_LAN3 BIT(11)
> +#define STF_DPHY_GPI_EN GENMASK(17, 12)
> +#define STF_DPHY_HS_FREQ_CHANGE_CLK BIT(18)
> +#define STF_DPHY_HS_FREQ_CHANGE_CLK1 BIT(19)
> +#define STF_DPHY_LANE_SWAP_CLK GENMASK(22, 20)
> +#define STF_DPHY_LANE_SWAP_CLK1 GENMASK(25, 23)
> +#define STF_DPHY_LANE_SWAP_LAN0 GENMASK(28, 26)
> +#define STF_DPHY_LANE_SWAP_LAN1 GENMASK(31, 29)
> +
> +#define STF_DPHY_LANE_SWAP_LAN2 GENMASK(2, 0)
> +#define STF_DPHY_LANE_SWAP_LAN3 GENMASK(5, 3)
> +#define STF_DPHY_MP_TEST_EN BIT(6)
> +#define STF_DPHY_MP_TEST_MODE_SEL GENMASK(11, 7)
> +#define STF_DPHY_PLL_CLK_SEL GENMASK(21, 12)
> +#define STF_DPHY_PRECOUNTER_IN_CLK GENMASK(29, 22)
> +
> +#define STF_DPHY_PRECOUNTER_IN_CLK1 GENMASK(7, 0)
> +#define STF_DPHY_PRECOUNTER_IN_LAN0 GENMASK(15, 8)
> +#define STF_DPHY_PRECOUNTER_IN_LAN1 GENMASK(23, 16)
> +#define STF_DPHY_PRECOUNTER_IN_LAN2 GENMASK(31, 24)
> +
> +#define STF_DPHY_PRECOUNTER_IN_LAN3 GENMASK(7, 0)
> +#define STF_DPHY_RX_1C2C_SEL BIT(8)
> +
> +#define STF_MAP_LANES_NUM 6
> +
> +struct regval {
> + u32 addr;
> + u32 val;
> +};
> +
> +struct stf_dphy_info {
> + /**
> + * @maps:
> + *
> + * Physical lanes and logic lanes mapping table.
> + *
> + * The default order is:
> + * [clk lane0, data lane 0, data lane 1, data lane 2, date lane 3, clk lane 1]
> + */
> + u8 maps[STF_MAP_LANES_NUM];
> +};
> +
> +struct stf_dphy {
> + struct device *dev;
> + void __iomem *regs;
> + struct clk *cfg_clk;
> + struct clk *ref_clk;
> + struct clk *tx_clk;
> + struct reset_control *rstc;
> + struct regulator *mipi_0p9;
> + struct phy *phy;
> + const struct stf_dphy_info *info;
> +};
> +
> +static const struct regval stf_dphy_init_list[] = {
> + { STF_DPHY_APBCFGSAIF_SYSCFG(4), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(8), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(12), 0x0000fff0 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(16), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(20), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(24), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(28), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(32), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(36), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(40), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(40), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(48), 0x24000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(52), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(56), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(60), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(64), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(68), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(72), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(76), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(80), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(84), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(88), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(92), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(96), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(100), 0x02000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(104), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(108), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(112), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(116), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(120), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(124), 0x0000000c },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(128), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(132), 0xcc500000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(136), 0x000000cc },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(140), 0x00000000 },
> + { STF_DPHY_APBCFGSAIF_SYSCFG(144), 0x00000000 },
> +};
> +
> +static int stf_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
> +{
> + struct stf_dphy *dphy = phy_get_drvdata(phy);
> + const struct stf_dphy_info *info = dphy->info;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(stf_dphy_init_list); i++)
> + writel(stf_dphy_init_list[i].val,
> + dphy->regs + stf_dphy_init_list[i].addr);
> +
> + writel(FIELD_PREP(STF_DPHY_DA_CDPHY_R100_CTRL0_2D1C_EFUSE_EN, 1) |
> + FIELD_PREP(STF_DPHY_DA_CDPHY_R100_CTRL0_2D1C_EFUSE_IN, 0x1b) |
> + FIELD_PREP(STF_DPHY_DA_CDPHY_R100_CTRL1_2D1C_EFUSE_EN, 1) |
> + FIELD_PREP(STF_DPHY_DA_CDPHY_R100_CTRL1_2D1C_EFUSE_IN, 0x1b),
> + dphy->regs + STF_DPHY_APBCFGSAIF_SYSCFG(0));
> +
> + writel(FIELD_PREP(STF_DPHY_DATA_BUS16_8, 0) |
> + FIELD_PREP(STF_DPHY_DEBUG_MODE_SEL, 0x5a),
> + dphy->regs + STF_DPHY_APBCFGSAIF_SYSCFG(184));

bunch of magic numbers here and previous one..?

> +
> + writel(FIELD_PREP(STF_DPHY_ENABLE_CLK, 1) |
> + FIELD_PREP(STF_DPHY_ENABLE_CLK1, 1) |
> + FIELD_PREP(STF_DPHY_ENABLE_LAN0, 1) |
> + FIELD_PREP(STF_DPHY_ENABLE_LAN1, 1) |
> + FIELD_PREP(STF_DPHY_ENABLE_LAN2, 1) |
> + FIELD_PREP(STF_DPHY_ENABLE_LAN3, 1) |
> + FIELD_PREP(STF_DPHY_GPI_EN, 0) |
> + FIELD_PREP(STF_DPHY_HS_FREQ_CHANGE_CLK, 0) |
> + FIELD_PREP(STF_DPHY_HS_FREQ_CHANGE_CLK1, 0) |
> + FIELD_PREP(STF_DPHY_LANE_SWAP_CLK, info->maps[0]) |
> + FIELD_PREP(STF_DPHY_LANE_SWAP_CLK1, info->maps[5]) |
> + FIELD_PREP(STF_DPHY_LANE_SWAP_LAN0, info->maps[1]) |
> + FIELD_PREP(STF_DPHY_LANE_SWAP_LAN1, info->maps[2]),
> + dphy->regs + STF_DPHY_APBCFGSAIF_SYSCFG(188));
> +
> + writel(FIELD_PREP(STF_DPHY_LANE_SWAP_LAN2, info->maps[3]) |
> + FIELD_PREP(STF_DPHY_LANE_SWAP_LAN3, info->maps[4]) |
> + FIELD_PREP(STF_DPHY_MP_TEST_EN, 0) |
> + FIELD_PREP(STF_DPHY_MP_TEST_MODE_SEL, 0) |
> + FIELD_PREP(STF_DPHY_PLL_CLK_SEL, 0x37c) |
> + FIELD_PREP(STF_DPHY_PRECOUNTER_IN_CLK, 8),
> + dphy->regs + STF_DPHY_APBCFGSAIF_SYSCFG(192));
> +
> + writel(FIELD_PREP(STF_DPHY_PRECOUNTER_IN_CLK1, 8) |
> + FIELD_PREP(STF_DPHY_PRECOUNTER_IN_LAN0, 7) |
> + FIELD_PREP(STF_DPHY_PRECOUNTER_IN_LAN1, 7) |
> + FIELD_PREP(STF_DPHY_PRECOUNTER_IN_LAN2, 7),
> + dphy->regs + STF_DPHY_APBCFGSAIF_SYSCFG(196));
> +
> + writel(FIELD_PREP(STF_DPHY_PRECOUNTER_IN_LAN3, 7) |
> + FIELD_PREP(STF_DPHY_RX_1C2C_SEL, 0),
> + dphy->regs + STF_DPHY_APBCFGSAIF_SYSCFG(200));
> +
> + return 0;
> +}
> +
> +static int stf_dphy_power_on(struct phy *phy)
> +{
> + struct stf_dphy *dphy = phy_get_drvdata(phy);
> + int ret;
> +
> + pm_runtime_get_sync(dphy->dev);

no error check?

> +
> + ret = regulator_enable(dphy->mipi_0p9);
> + if (ret)
> + return ret;

should you not drop the pm reference on error here?

--
~Vinod