Re: [PATCH net-next 0/3] net: dsa: microchip: fix writes to phy registers >= 0x10

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Tue, 20 Jun 2023 13:38:51 +0200 you wrote:
> Patch 1 is just a simplification, technically unrelated to the other
> two patches. But it would be a bit inconsistent to have the new
> ksz_prmw32() introduced in patch 2 use ksz_rmw32() while leaving
> ksz_prmw8() as-is.
> 
> The actual fix is of course patch 3. I can definitely see some weird
> behaviour on our ksz9567 when writing to phy registers 0x1e and 0x1f
> (with phytool from userspace), though it does not seem that the effect
> is always to write zeroes to the buddy register as the errata sheet
> says would be the case. In our case, the switch is connected via i2c;
> I hope somebody with other switches and/or the SPI variants can test
> this.
> 
> [...]

Here is the summary with links:
  - [net-next,1/3] net: dsa: microchip: simplify ksz_prmw8()
    https://git.kernel.org/netdev/net-next/c/3b42fbd59511
  - [net-next,2/3] net: dsa: microchip: add ksz_prmw32() helper
    https://git.kernel.org/netdev/net-next/c/ece28ecbec9f
  - [net-next,3/3] net: dsa: microchip: fix writes to phy registers >= 0x10
    https://git.kernel.org/netdev/net-next/c/5c844d57aa78

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html