[PATCH 1/4] pcie: qcom: Fix the macro PARF_SLV_ADDR_SPACE_SIZE_2_3_3

[Sricharan Ramabadhran]

PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro used for IPQ8074
pcie slave addr size was initially set to 0x358, but
was wrongly changed to 0x168 as a part of
'PCI: qcom: Sort and group registers and bitfield definitions'
Fixing it back to right value here.

Without this pcie bring up on IPQ8074 is broken now.

Fixes: 769e49d87b15 ("PCI: qcom: Sort and group registers and bitfield definitions")
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 4ab30892f6ef..59823beed13f 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -43,7 +43,7 @@
 #define PARF_PHY_REFCLK				0x4c
 #define PARF_CONFIG_BITS			0x50
 #define PARF_DBI_BASE_ADDR			0x168
-#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16c /* Register offset specific to IP ver 2.3.3 */
+#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x358 /* Register offset specific to IP ver 2.3.3 */
 #define PARF_MHI_CLOCK_RESET_CTRL		0x174
 #define PARF_AXI_MSTR_WR_ADDR_HALT		0x178
 #define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8
-- 
2.34.1