[PATCH net-next v2 09/10] net: mdio: add C45-over-C22 fallback to fwnode_mdiobus_register_phy()

[Michael Walle]

If trying to register a C45 PHY on an MDIO bus which isn't capable of
C45 (either because the MDIO controller doesn't support it or because
C45 accesses are prohibited due to faulty C22 PHYs) we can fall back to
the new C45-over-C22 access method.

Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>

---
Please note, that both with the old and the new code compatible =
"ethernet-phy-idNNNN.NNNN" only works for the C22 case. I'm wondering if
compatible = "ethernet-phy-idNNNN.NNNN", "ethernet-phy-ieee802.3-c45
even makes sense because there might be multiple C45 ids. At least it is
an allowed pattern according to the device tree bindings. But with the
current code, the ethernet-phy-idNNNN.NNNN is ignored in the c45 case.
---
 drivers/net/mdio/fwnode_mdio.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index 972c8932c2fe..fed056d82b4e 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -115,7 +115,6 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	struct mii_timestamper *mii_ts = NULL;
 	struct pse_control *psec = NULL;
 	struct phy_device *phy;
-	bool is_c45;
 	u32 phy_id;
 	int rc;
 
@@ -129,13 +128,19 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 		goto clean_pse;
 	}
 
-	is_c45 = fwnode_device_is_compatible(child, "ethernet-phy-ieee802.3-c45");
-	if (is_c45 || fwnode_get_phy_id(child, &phy_id))
-		phy = get_phy_device(bus, addr,
-				     is_c45 ? PHY_ACCESS_C45 : PHY_ACCESS_C22);
-	else
+	if (fwnode_device_is_compatible(child, "ethernet-phy-ieee802.3-c45")) {
+		if (mdiobus_supports_c45(bus))
+			phy = get_phy_device(bus, addr, PHY_ACCESS_C45);
+		else
+			phy = get_phy_device(bus, addr,
+					     PHY_ACCESS_C45_OVER_C22);
+	} else if (fwnode_get_phy_id(child, &phy_id) == 0) {
 		phy = phy_device_create(bus, addr, phy_id, PHY_ACCESS_C22,
 					NULL);
+	} else {
+		phy = get_phy_device(bus, addr, PHY_ACCESS_C22);
+	}
+
 	if (IS_ERR(phy)) {
 		rc = PTR_ERR(phy);
 		goto clean_mii_ts;

-- 
2.39.2