Re: [PATCH 2/3] soc: sifive: Add SiFive private L2 cache PMU driver

[Eric Lin]

Hi Will,

On Fri, Jun 23, 2023 at 9:24 PM Will Deacon <will@xxxxxxxxxx> wrote:
>
> Hi folks,
>
> On Wed, Jun 21, 2023 at 04:17:24PM +0100, Conor Dooley wrote:
> > On Tue, Jun 20, 2023 at 11:14:32AM +0800, Eric Lin wrote:
> > > On Fri, Jun 16, 2023 at 6:13 PM Conor Dooley <conor.dooley@xxxxxxxxxxxxx> wrote:
> > > > On Fri, Jun 16, 2023 at 02:32:09PM +0800, Eric Lin wrote:
> > > > >  drivers/soc/sifive/Kconfig            |   9 +
> > > > >  drivers/soc/sifive/Makefile           |   1 +
> > > > >  drivers/soc/sifive/sifive_pl2.h       |  20 +
> > > > >  drivers/soc/sifive/sifive_pl2_cache.c |  16 +
> > > > >  drivers/soc/sifive/sifive_pl2_pmu.c   | 669 ++++++++++++++++++++++++++
> > > >
> > > > Perf drivers should be in drivers/perf, no?
> > > >
> > >
> > > But I grep perf_pmu_register(), it seems not all the pmu drivers are
> > > in drivers/perf as below:
> > >
> > > arch/arm/mach-imx/mmdc.c:517:   ret =
> > > perf_pmu_register(&(pmu_mmdc->pmu), name, -1);
> > > arch/arm/mm/cache-l2x0-pmu.c:552:       ret =
> > > perf_pmu_register(l2x0_pmu, l2x0_name, -1);
> > > ...
> > > drivers/dma/idxd/perfmon.c:627: rc = perf_pmu_register(&idxd_pmu->pmu,
> > > idxd_pmu->name, -1);
> > > drivers/fpga/dfl-fme-perf.c:904:static int
> > > fme_perf_pmu_register(struct platform_device *pdev,
> > > drivers/fpga/dfl-fme-perf.c:929:        ret = perf_pmu_register(pmu, name, -1);
> > > ...
> > > drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:549:    ret =
> > > perf_pmu_register(&pmu_entry->pmu, pmu_name, -1);
> > > drivers/gpu/drm/i915/i915_pmu.c:1190:   ret =
> > > perf_pmu_register(&pmu->base, pmu->name, -1);
> > > drivers/hwtracing/coresight/coresight-etm-perf.c:907:   ret =
> > > perf_pmu_register(&etm_pmu, CORESIGHT_ETM_PMU_NAME, -1);
> > > drivers/hwtracing/ptt/hisi_ptt.c:895:   ret =
> > > perf_pmu_register(&hisi_ptt->hisi_ptt_pmu, pmu_name, -1);
> > > drivers/iommu/intel/perfmon.c:570:      return
> > > perf_pmu_register(&iommu_pmu->pmu, iommu_pmu->pmu.name, -1);
> > > drivers/nvdimm/nd_perf.c:309:   rc = perf_pmu_register(&nd_pmu->pmu,
> > > nd_pmu->pmu.name, -1);
> > > ...
> > >
> > > I just wondering what kind of pmu drivers should be in drivers/perf
> > > and what kind of pmu drivers should not be in drivers/perf.
> > > Thanks.
> >
> > To be quite honest, I have no idea.
> > I'm just a wee bit wary of taking anything that appears to have another
> > home via drivers/soc. I'd rather break drivers out, using the aux bus or
> > similar if need be, so that people who are knowledgeable in an area are
> > CCed on patches.
> > Hopefully Arnd or the Perf people can offer some guidance here. If it
> > does go into drivers/soc, it'll need a review from someone knowledgeable
> > of perf anyway.
>
> I'm not territorial about the perf drivers at all, but L2CC PMUs like this
> one probably fit pretty well in drivers/perf. The usual reason for putting
> drivers elsewhere is if the PMU is tightly coupled with some other IP which
> is handled by another subsystem (e.g. GPU).
>
Thanks for the explanation. OK, I'll put the pl2 cache PMU driver in
drivers/perf.

Best Regards,
Eric Lin.

> Will