[PATCH 15/15] arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel
From: Marijn Suijten
Date: Fri Jun 23 2023 - 20:42:32 EST
Enable MDSS and DSI, and configure the Samsung SOFEF01-M ams597ut01
6.0" 1080x2520 panel.
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
.../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 59 ++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 9f8a9ef398a2..bdf7c15f9b83 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -179,6 +179,43 @@ &i2c3 {
/* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&pm6125_l18>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "samsung,sofef01-m-ams597ut01";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>;
+
+ vddio-supply = <&pm6125_l12>;
+
+ pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
+ pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+};
+
&pm6125_adc {
pinctrl-names = "default";
pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
@@ -469,6 +506,28 @@ vol_down_n: vol-down-n-state {
drive-strength = <2>;
bias-disable;
};
+
+ sde_te_active_sleep: sde-te-active-sleep-state {
+ pins = "gpio89";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sde_dsi_active: sde-dsi-active-state {
+ pins = "gpio90";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ sde_dsi_sleep: sde-dsi-sleep-state {
+ pins = "gpio90";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
};
&usb3 {
--
2.41.0