Re: [Intel-wired-lan] [PATCH] e1000e: Use PME poll to circumvent unreliable ACPI wake

[naamax.meir]

On 6/1/2023 19:25, Kai-Heng Feng wrote:
> On some I219 devices, ethernet cable plugging detection only works once
> from PCI D3 state. Subsequent cable plugging does set PME bit correctly,
> but device still doesn't get woken up.
>
> Since I219 connects to the root complex directly, it relies on platform
> firmware (ACPI) to wake it up. In this case, the GPE from _PRW only
> works for first cable plugging but fails to notify the driver for
> subsequent plugging events.
>
> The issue was originally found on CNP, but the same issue can be found
> on ADL too. So workaround the issue by continuing use PME poll after
> first ACPI wake. As PME poll is always used, the runtime suspend
> restriction for CNP can also be removed.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> ---
>   drivers/net/ethernet/intel/e1000e/netdev.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)

Tested-by: Naama Meir <naamax.meir@xxxxxxxxxxxxxxx>