[GIT PULL] Crypto Update for 6.5
From: Herbert Xu
Date: Thu Jun 29 2023 - 04:29:37 EST
Hi Linus:
Please note that there is a nasty merge conflict in the directory
crypto/asymmetric because of the conflicting changes in mainline
versus what's in cryptodev.
For the resolution, please pick the code from cryptodev as the
linear interface makes the previous fix-up in mainline unnecessary.
For the time being there is still an unnecessary copy in the API
for the software case but hopefully that will go away once I
finish the conversion of the underlying algorithm code to use
linear addresses instead of SG lists.
The following changes since commit ac9a78681b921877518763ba0e89202254349d1b:
Linux 6.4-rc1 (2023-05-07 13:34:35 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git v6.5-p1
for you to fetch changes up to 486bfb05913ac9969a3a71a4dc48f17f31cb162d:
crypto: akcipher - Do not copy dst if it is NULL (2023-06-27 17:59:52 +0800)
----------------------------------------------------------------
This update includes the following changes:
API:
- Add linear akcipher/sig API.
- Add tfm cloning (hmac, cmac).
- Add statesize to crypto_ahash.
Algorithms:
- Allow only odd e and restrict value in FIPS mode for RSA.
- Replace LFSR with SHA3-256 in jitter.
- Add interface for gathering of raw entropy in jitter.
Drivers:
- Fix race on data_avail and actual data in hwrng/virtio.
- Add hash and HMAC support in starfive.
- Add RSA algo support in starfive.
- Add support for PCI device 0x156E in ccp.
----------------------------------------------------------------
Adam Guerin (2):
crypto: qat - move returns to default case
crypto: qat - extend configuration for 4xxx
Arnd Bergmann (2):
crypto: aegis128-neon - add header for internal prototypes
crypto: marvell/cesa - Fix type mismatch warning
Bharat Bhushan (1):
hwrng: cn10k - Add extended trng register support
Bhupesh Sharma (2):
dt-bindings: qcom-qce: Fix compatible combinations for SM8150 and IPQ4019 SoCs
dt-bindings: qcom-qce: Add compatibles for SM6115 and QCM2290
Damian Muszynski (1):
crypto: qat - move dbgfs init to separate file
Dan Carpenter (1):
crypto: ixp4xx - silence uninitialized variable warning
David Yang (2):
hwrng: histb - Move driver to drivers/char/hw_random/histb-rng.c
crypto: engine - Fix struct crypto_engine_op doc
Dmitry Safonov (2):
crypto: api - Remove crypto_init_ops()
crypto: cipher - On clone do crypto_mod_get()
Eric Biggers (1):
crypto: Kconfig - warn about performance overhead of CRYPTO_STATS
Franziska Naepelt (1):
crypto: hmac - Add missing blank line
Giovanni Cabiddu (4):
crypto: qat - add missing function declaration in adf_dbgfs.h
crypto: qat - make fw images name constant
crypto: qat - refactor fw config logic for 4xxx
crypto: qat - do not export adf_init_admin_pm()
Hareshx Sankar Raj (2):
crypto: qat - unmap buffer before free for DH
crypto: qat - unmap buffers before free for RSA
Herbert Xu (28):
hwrng: Kconfig - Add HAS_IOMEM dependencies for exynos/meson/mtk/npcm
crypto: arm/sha1-neon - Fix clang function cast warnings
crypto: arm/sha256-neon - Fix clang function cast warnings
crypto: arm/sha512-neon - Fix clang function cast warnings
crypto: hash - Add statesize to crypto_ahash
crypto: hash - Make crypto_ahash_alg helper available
hwrng: virtio - Fix race on data_avail and actual data
crypto: lib/sha256 - Remove redundant and unused sha224_update
crypto: lib/sha256 - Use generic code from sha256_base
crypto: arm64/sha256-glue - Include module.h
crypto: starfive - Depend on AMBA_PL08X instead of selecting it
crypto: cmac - Use modern init_tfm/exit_tfm
crypto: cipher - Add crypto_clone_cipher
crypto: cmac - Add support for cloning
crypto: shash - Allow cloning on algorithms with no init_tfm
dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE
crypto: algboss - Add missing dependency on RNG2
crypto: geniv - Split geniv out of AEAD Kconfig option
crypto: api - Add __crypto_alloc_tfmgfp
crypto: akcipher - Add sync interface without SG lists
crypto: sig - Add interface for sign/verify
KEYS: Add forward declaration in asymmetric-parser.h
KEYS: asymmetric: Move sm2 code into x509_public_key
KEYS: asymmetric: Use new crypto interface without scatterlists
crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled
crypto: akcipher - Set request tfm on sync path
crypto: sig - Fix verify call
crypto: akcipher - Do not copy dst if it is NULL
Horia GeantA (1):
crypto: caam - refactor RNG initialization
Jia Jie Ho (6):
dt-bindings: crypto: Add StarFive crypto module
crypto: starfive - Add crypto engine support
crypto: starfive - Add hash and HMAC support
crypto: starfive - Fix driver dependencies
crypto: starfive - Update hash module irq handling
crypto: starfive - Add RSA algo support
John Allen (1):
crypto: ccp - Add support for PCI device 0x156E
Karthikeyan Gopal (2):
crypto: qat - set deprecated capabilities as reserved
crypto: qat - update slice mask for 4xxx devices
Lucas Segarra Fernandez (1):
crypto: qat - expose pm_idle_enabled through sysfs
Mahmoud Adam (1):
crypto: rsa - allow only odd e and restrict value in FIPS mode
Mario Limonciello (2):
crypto: ccp - Validate that platform access mailbox registers are declared
crypto: ccp - Add support for PCI device 0x17E0
Martin Kaiser (9):
hwrng: imx-rngc - simpler check for available random bytes
hwrng: imx-rngc - use bitfield macros to read rng type
hwrng: imx-rngc - use BIT(x) for register bit defines
hwrng: imx-rngc - mark the probe function as __init
hwrng: imx-rngc - don't init of_device_id's data
hwrng: imx-rngc - fix the timeout for init and self check
hwrng: st - support compile-testing
hwrng: st - keep clock enabled while hwrng is registered
hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS
Meenakshi Aggarwal (1):
crypto: caam - optimize RNG sample size
Pankaj Gupta (1):
crypto: caam - Fix soc_id matching
Randy Dunlap (1):
crypto: nx - fix build warnings when DEBUG_FS is not enabled
Rob Herring (1):
crypto: n2 - Use of_property_read_reg() to parse "reg"
Srujana Challa (2):
crypto: octeontx2 - add support for AF to CPT PF uplink mbox
crypto: octeontx2 - hardware configuration for inline IPsec
Stephan Müller (3):
crypto: jitter - replace LFSR with SHA3-256
crypto: jitter - add interface for gathering of raw entropy
crypto: jitter - correct health test during initialization
Tero Kristo (1):
crypto: sa2ul - change unsafe data size limit to 255 bytes
Uwe Kleine-König (1):
crypto: atmel - Switch i2c drivers back to use .probe()
Victoria Milhoan (1):
crypto: caam - adjust RNG timing to support more devices
Victoria Milhoan (b42089) (1):
crypto: caam - add a test for the RNG
Documentation/ABI/testing/sysfs-driver-qat | 46 ++
.../devicetree/bindings/crypto/qcom-qce.yaml | 52 +-
.../bindings/crypto/starfive,jh7110-crypto.yaml | 70 ++
MAINTAINERS | 7 +
arch/arm/crypto/sha1_neon_glue.c | 12 +-
arch/arm/crypto/sha256_neon_glue.c | 12 +-
arch/arm/crypto/sha512-neon-glue.c | 12 +-
arch/arm64/crypto/sha256-glue.c | 3 +-
crypto/Kconfig | 66 +-
crypto/Makefile | 4 +-
crypto/aegis-neon.h | 17 +
crypto/aegis128-neon-inner.c | 1 +
crypto/aegis128-neon.c | 12 +-
crypto/ahash.c | 9 +-
crypto/akcipher.c | 124 ++-
crypto/api.c | 27 +-
crypto/asymmetric_keys/public_key.c | 303 ++++---
crypto/asymmetric_keys/x509_public_key.c | 29 +-
crypto/cipher.c | 28 +
crypto/cmac.c | 36 +-
crypto/hmac.c | 1 +
crypto/internal.h | 22 +
crypto/jitterentropy-kcapi.c | 192 ++++-
crypto/jitterentropy-testing.c | 294 +++++++
crypto/jitterentropy.c | 152 ++--
crypto/jitterentropy.h | 20 +-
crypto/rsa.c | 36 +
crypto/shash.c | 12 +-
crypto/sig.c | 157 ++++
crypto/sm2.c | 104 ++-
drivers/char/hw_random/Kconfig | 27 +-
drivers/char/hw_random/Makefile | 1 +
drivers/char/hw_random/cn10k-rng.c | 63 +-
.../trng/trng-stb.c => char/hw_random/histb-rng.c} | 83 +-
drivers/char/hw_random/imx-rngc.c | 53 +-
drivers/char/hw_random/st-rng.c | 21 +-
drivers/char/hw_random/virtio-rng.c | 10 +-
drivers/crypto/Kconfig | 1 +
drivers/crypto/Makefile | 1 +
drivers/crypto/atmel-ecc.c | 2 +-
drivers/crypto/atmel-sha204a.c | 2 +-
drivers/crypto/caam/Kconfig | 9 +
drivers/crypto/caam/caamrng.c | 48 ++
drivers/crypto/caam/ctrl.c | 272 ++++---
drivers/crypto/caam/intern.h | 1 +
drivers/crypto/caam/regs.h | 14 +-
drivers/crypto/ccp/platform-access.c | 5 +
drivers/crypto/ccp/sp-pci.c | 43 +
drivers/crypto/hisilicon/Kconfig | 7 -
drivers/crypto/hisilicon/Makefile | 2 +-
drivers/crypto/hisilicon/trng/Makefile | 3 -
drivers/crypto/intel/ixp4xx/ixp4xx_crypto.c | 2 +-
.../crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c | 229 ++++--
.../crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.h | 2 +-
drivers/crypto/intel/qat/qat_4xxx/adf_drv.c | 45 +-
drivers/crypto/intel/qat/qat_c3xxx/adf_drv.c | 12 +-
drivers/crypto/intel/qat/qat_c3xxxvf/adf_drv.c | 12 +-
drivers/crypto/intel/qat/qat_c62x/adf_drv.c | 12 +-
drivers/crypto/intel/qat/qat_c62xvf/adf_drv.c | 12 +-
drivers/crypto/intel/qat/qat_common/Makefile | 4 +-
.../intel/qat/qat_common/adf_accel_devices.h | 2 +-
.../crypto/intel/qat/qat_common/adf_accel_engine.c | 2 +-
drivers/crypto/intel/qat/qat_common/adf_admin.c | 1 -
drivers/crypto/intel/qat/qat_common/adf_cfg.c | 28 +-
drivers/crypto/intel/qat/qat_common/adf_cfg.h | 2 +
.../crypto/intel/qat/qat_common/adf_cfg_strings.h | 8 +
.../crypto/intel/qat/qat_common/adf_common_drv.h | 2 +-
drivers/crypto/intel/qat/qat_common/adf_dbgfs.c | 69 ++
drivers/crypto/intel/qat/qat_common/adf_dbgfs.h | 29 +
drivers/crypto/intel/qat/qat_common/adf_gen4_pm.c | 12 +-
drivers/crypto/intel/qat/qat_common/adf_gen4_pm.h | 1 +
drivers/crypto/intel/qat/qat_common/adf_init.c | 6 +
drivers/crypto/intel/qat/qat_common/adf_sysfs.c | 60 ++
drivers/crypto/intel/qat/qat_common/icp_qat_hw.h | 3 +-
drivers/crypto/intel/qat/qat_common/qat_algs.c | 1 -
.../crypto/intel/qat/qat_common/qat_asym_algs.c | 14 +-
drivers/crypto/intel/qat/qat_common/qat_uclo.c | 8 +-
drivers/crypto/intel/qat/qat_dh895xcc/adf_drv.c | 12 +-
drivers/crypto/intel/qat/qat_dh895xccvf/adf_drv.c | 12 +-
drivers/crypto/marvell/cesa/cipher.c | 2 +-
drivers/crypto/marvell/octeontx2/otx2_cpt_common.h | 15 +
.../marvell/octeontx2/otx2_cpt_mbox_common.c | 3 +
drivers/crypto/marvell/octeontx2/otx2_cptlf.c | 34 +-
drivers/crypto/marvell/octeontx2/otx2_cptlf.h | 33 +-
drivers/crypto/marvell/octeontx2/otx2_cptpf.h | 7 +
drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c | 41 +
drivers/crypto/marvell/octeontx2/otx2_cptpf_mbox.c | 247 +++++-
.../crypto/marvell/octeontx2/otx2_cptpf_ucode.c | 10 +-
drivers/crypto/marvell/octeontx2/otx2_cptvf.h | 1 +
drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c | 8 +-
drivers/crypto/n2_core.c | 9 +-
drivers/crypto/nx/Makefile | 2 +-
drivers/crypto/nx/nx.h | 4 +-
drivers/crypto/sa2ul.h | 2 +-
drivers/crypto/starfive/Kconfig | 20 +
drivers/crypto/starfive/Makefile | 4 +
drivers/crypto/starfive/jh7110-cryp.c | 258 ++++++
drivers/crypto/starfive/jh7110-cryp.h | 172 ++++
drivers/crypto/starfive/jh7110-hash.c | 899 +++++++++++++++++++++
drivers/crypto/starfive/jh7110-rsa.c | 617 ++++++++++++++
drivers/md/dm-crypt.c | 15 +-
include/crypto/akcipher.h | 36 +
include/crypto/algapi.h | 1 -
include/crypto/engine.h | 2 +-
include/crypto/hash.h | 3 +-
include/crypto/internal/cipher.h | 2 +
include/crypto/internal/hash.h | 12 +
include/crypto/internal/sig.h | 17 +
include/crypto/public_key.h | 2 -
include/crypto/sha2.h | 2 +-
include/crypto/sha256_base.h | 50 +-
include/crypto/sig.h | 140 ++++
include/crypto/sm2.h | 21 +-
include/keys/asymmetric-parser.h | 2 +
include/linux/crypto.h | 3 +-
lib/crypto/sha256.c | 79 +-
116 files changed, 4940 insertions(+), 965 deletions(-)
create mode 100644 Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
create mode 100644 crypto/aegis-neon.h
create mode 100644 crypto/jitterentropy-testing.c
create mode 100644 crypto/sig.c
rename drivers/{crypto/hisilicon/trng/trng-stb.c => char/hw_random/histb-rng.c} (53%)
create mode 100644 drivers/crypto/intel/qat/qat_common/adf_dbgfs.c
create mode 100644 drivers/crypto/intel/qat/qat_common/adf_dbgfs.h
create mode 100644 drivers/crypto/starfive/Kconfig
create mode 100644 drivers/crypto/starfive/Makefile
create mode 100644 drivers/crypto/starfive/jh7110-cryp.c
create mode 100644 drivers/crypto/starfive/jh7110-cryp.h
create mode 100644 drivers/crypto/starfive/jh7110-hash.c
create mode 100644 drivers/crypto/starfive/jh7110-rsa.c
create mode 100644 include/crypto/internal/sig.h
create mode 100644 include/crypto/sig.h
Thanks,
--
Email: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt