Re: [PATCH v2 13/15] arm64: dts: qcom: sm6125: Add dispcc node

[Dmitry Baryshkov]

On 27/06/2023 23:14, Marijn Suijten wrote:
> Enable and configure the dispcc node on SM6125 for consumption by MDSS
> later on.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/sm6125.dtsi | 25 +++++++++++++++++++++++++
>   1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index edb03508dba3..a5cc0d43d2d9 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -3,6 +3,7 @@
>    * Copyright (c) 2021, Martin Botka <martin.botka@xxxxxxxxxxxxxx>
>    */
>   
> +#include <dt-bindings/clock/qcom,dispcc-sm6125.h>
>   #include <dt-bindings/clock/qcom,gcc-sm6125.h>
>   #include <dt-bindings/clock/qcom,rpmcc.h>
>   #include <dt-bindings/dma/qcom-gpi.h>
> @@ -1203,6 +1204,30 @@ sram@4690000 {
>   			reg = <0x04690000 0x10000>;
>   		};
>   
> +		dispcc: clock-controller@5f00000 {
> +			compatible = "qcom,sm6125-dispcc";
> +			reg = <0x05f00000 0x20000>;
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <&gcc GCC_DISP_AHB_CLK>,
> +				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
> +			clock-names = "bi_tcxo",
> +				      "dsi0_phy_pll_out_byteclk",
> +				      "dsi0_phy_pll_out_dsiclk",
> +				      "dsi1_phy_pll_out_dsiclk",
> +				      "dp_phy_pll_link_clk",
> +				      "dp_phy_pll_vco_div_clk",
> +				      "cfg_ahb_clk",
> +				      "gcc_disp_gpll0_div_clk_src";
> +			power-domains = <&rpmpd SM6125_VDDCX>;

Would it be logical to specify the required-opps too?

> +			#clock-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
>   		apps_smmu: iommu@c600000 {
>   			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
>   			reg = <0x0c600000 0x80000>;

--
With best wishes
Dmitry