[PATCH 1/2] fbdev: Split frame buffer support in FB and FB_CORE symbols

From: Javier Martinez Canillas
Date: Thu Jun 29 2023 - 18:52:37 EST

Next message: Javier Martinez Canillas: "[PATCH 0/2] Allow disabling all native fbdev drivers and only keeping DRM emulation"
Previous message: Javier Martinez Canillas: "[PATCH 2/2] drm: Make fbdev emulation depend on FB_CORE instead of FB"
In reply to: Javier Martinez Canillas: "[PATCH 2/2] drm: Make fbdev emulation depend on FB_CORE instead of FB"
Next in thread: Arnd Bergmann: "Re: [PATCH 1/2] fbdev: Split frame buffer support in FB and FB_CORE symbols"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Currently the CONFIG_FB option has to be enabled even if no legacy fbdev
drivers are needed (e.g: only to have support for framebuffer consoles).

The DRM subsystem has a fbdev emulation layer, but depends on CONFIG_FB
and so it can only be enabled if that dependency is enabled as well.

That means fbdev drivers have to be explicitly disabled if users want to
enable CONFIG_FB, only to use fbcon and/or the DRM fbdev emulation layer.

This patch introduces a CONFIG_FB_CORE option that could be enabled just
to have the core support needed for CONFIG_DRM_FBDEV_EMULATION, allowing
CONFIG_FB to be disabled (and automatically disabling all fbdev drivers).

Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
---

arch/x86/Makefile | 2 +-
arch/x86/video/Makefile | 2 +-
drivers/video/console/Kconfig | 2 +-
drivers/video/fbdev/Kconfig | 62 ++++++++++++++++++-------------
drivers/video/fbdev/core/Makefile | 14 +++----
5 files changed, 47 insertions(+), 35 deletions(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index b39975977c03..89a02e69be5f 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -259,7 +259,7 @@ drivers-$(CONFIG_PCI) += arch/x86/pci/
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/x86/power/

-drivers-$(CONFIG_FB) += arch/x86/video/
+drivers-$(CONFIG_FB_CORE) += arch/x86/video/

####
# boot loader support. Several targets are kept for legacy purposes
diff --git a/arch/x86/video/Makefile b/arch/x86/video/Makefile
index 11640c116115..5ebe48752ffc 100644
--- a/arch/x86/video/Makefile
+++ b/arch/x86/video/Makefile
@@ -1,2 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_FB) += fbdev.o
+obj-$(CONFIG_FB_CORE) += fbdev.o
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index a2a88d42edf0..1b5a319971ed 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -72,7 +72,7 @@ config DUMMY_CONSOLE_ROWS

config FRAMEBUFFER_CONSOLE
bool "Framebuffer Console support"
- depends on FB && !UML
+ depends on FB_CORE && !UML
select VT_HW_CONSOLE_BINDING
select CRC32
select FONT_SUPPORT
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index cecf15418632..74d7a305657a 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -6,10 +6,8 @@
config FB_NOTIFY
bool

-menuconfig FB
- tristate "Support for frame buffer devices"
- select FB_NOTIFY
- select VIDEO_CMDLINE
+menuconfig FB_CORE
+ tristate "Core support for frame buffer devices"
help
The frame buffer device provides an abstraction for the graphics
hardware. It represents the frame buffer of some video hardware and
@@ -33,6 +31,20 @@ menuconfig FB
<http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
information.

+ This options enables the core support for frame buffer devices.
+
+menuconfig FB
+ tristate "Support for frame buffer device drivers"
+ depends on FB_CORE
+ select FB_NOTIFY
+ select VIDEO_CMDLINE
+ help
+ This enables support for native frame buffer device (fbdev) drivers.
+
+ The DRM subsystem provides support for emulated frame buffer devices
+ on top of KMS drivers, but this option allows legacy fbdev drivers to
+ be enabled as well.
+
Say Y here and to the driver for your graphics board below if you
are compiling a kernel for a non-x86 architecture.

@@ -44,7 +56,7 @@ menuconfig FB

config FIRMWARE_EDID
bool "Enable firmware EDID"
- depends on FB
+ depends on FB_CORE
help
This enables access to the EDID transferred from the firmware.
On the i386, this is from the Video BIOS. Enable this if DDC/I2C
@@ -59,7 +71,7 @@ config FIRMWARE_EDID

config FB_DEVICE
bool "Provide legacy /dev/fb* device"
- depends on FB
+ depends on FB_CORE
default y
help
Say Y here if you want the legacy /dev/fb* device file and
@@ -69,13 +81,13 @@ config FB_DEVICE

config FB_DDC
tristate
- depends on FB
+ depends on FB_CORE
select I2C_ALGOBIT
select I2C

config FB_CFB_FILLRECT
tristate
- depends on FB
+ depends on FB_CORE
help
Include the cfb_fillrect function for generic software rectangle
filling. This is used by drivers that don't provide their own
@@ -83,7 +95,7 @@ config FB_CFB_FILLRECT

config FB_CFB_COPYAREA
tristate
- depends on FB
+ depends on FB_CORE
help
Include the cfb_copyarea function for generic software area copying.
This is used by drivers that don't provide their own (accelerated)
@@ -91,7 +103,7 @@ config FB_CFB_COPYAREA

config FB_CFB_IMAGEBLIT
tristate
- depends on FB
+ depends on FB_CORE
help
Include the cfb_imageblit function for generic software image
blitting. This is used by drivers that don't provide their own
@@ -99,7 +111,7 @@ config FB_CFB_IMAGEBLIT

config FB_CFB_REV_PIXELS_IN_BYTE
bool
- depends on FB
+ depends on FB_CORE
help
Allow generic frame-buffer functions to work on displays with 1, 2
and 4 bits per pixel depths which has opposite order of pixels in
@@ -107,7 +119,7 @@ config FB_CFB_REV_PIXELS_IN_BYTE

config FB_SYS_FILLRECT
tristate
- depends on FB
+ depends on FB_CORE
help
Include the sys_fillrect function for generic software rectangle
filling. This is used by drivers that don't provide their own
@@ -115,7 +127,7 @@ config FB_SYS_FILLRECT

config FB_SYS_COPYAREA
tristate
- depends on FB
+ depends on FB_CORE
help
Include the sys_copyarea function for generic software area copying.
This is used by drivers that don't provide their own (accelerated)
@@ -123,7 +135,7 @@ config FB_SYS_COPYAREA

config FB_SYS_IMAGEBLIT
tristate
- depends on FB
+ depends on FB_CORE
help
Include the sys_imageblit function for generic software image
blitting. This is used by drivers that don't provide their own
@@ -162,22 +174,22 @@ endchoice

config FB_SYS_FOPS
tristate
- depends on FB
+ depends on FB_CORE

config FB_DEFERRED_IO
bool
- depends on FB
+ depends on FB_CORE

config FB_IO_HELPERS
bool
- depends on FB
+ depends on FB_CORE
select FB_CFB_COPYAREA
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT

config FB_SYS_HELPERS
bool
- depends on FB
+ depends on FB_CORE
select FB_SYS_COPYAREA
select FB_SYS_FILLRECT
select FB_SYS_FOPS
@@ -185,34 +197,34 @@ config FB_SYS_HELPERS

config FB_SYS_HELPERS_DEFERRED
bool
- depends on FB
+ depends on FB_CORE
select FB_DEFERRED_IO
select FB_SYS_HELPERS

config FB_HECUBA
tristate
- depends on FB
+ depends on FB_CORE
depends on FB_DEFERRED_IO

config FB_SVGALIB
tristate
- depends on FB
+ depends on FB_CORE
help
Common utility functions useful to fbdev drivers of VGA-based
cards.

config FB_MACMODES
tristate
- depends on FB
+ depends on FB_CORE

config FB_BACKLIGHT
tristate
- depends on FB
+ depends on FB_CORE
select BACKLIGHT_CLASS_DEVICE

config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
- depends on FB
+ depends on FB_CORE
help
This enables functions for handling video modes using the
Generalized Timing Formula and the EDID parser. A few drivers rely
@@ -222,7 +234,7 @@ config FB_MODE_HELPERS

config FB_TILEBLITTING
bool "Enable Tile Blitting Support"
- depends on FB
+ depends on FB_CORE
help
This enables tile blitting. Tile blitting is a drawing technique
where the screen is divided into rectangular sections (tiles), whereas
diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
index 9150bafd9e89..88ef39dad03b 100644
--- a/drivers/video/fbdev/core/Makefile
+++ b/drivers/video/fbdev/core/Makefile
@@ -1,22 +1,22 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_FB_NOTIFY) += fb_notify.o
-obj-$(CONFIG_FB) += fb.o
-fb-y := fb_backlight.o \
+obj-$(CONFIG_FB_CORE) += fb_core.o
+fb_core-y := fb_backlight.o \
fb_info.o \
fbmem.o fbmon.o fbcmap.o \
modedb.o fbcvt.o fb_cmdline.o fb_io_fops.o
-fb-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
-fb-$(CONFIG_FB_DEVICE) += fb_chrdev.o \
+fb_core-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
+fb_core-$(CONFIG_FB_DEVICE) += fb_chrdev.o \
fb_procfs.o \
fbsysfs.o

ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE),y)
-fb-y += fbcon.o bitblit.o softcursor.o
+fb_core-y += fbcon.o bitblit.o softcursor.o
ifeq ($(CONFIG_FB_TILEBLITTING),y)
-fb-y += tileblit.o
+fb_core-y += tileblit.o
endif
ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE_ROTATION),y)
-fb-y += fbcon_rotate.o fbcon_cw.o fbcon_ud.o \
+fb_core-y += fbcon_rotate.o fbcon_cw.o fbcon_ud.o \
fbcon_ccw.o
endif
endif
--
2.41.0

Next message: Javier Martinez Canillas: "[PATCH 0/2] Allow disabling all native fbdev drivers and only keeping DRM emulation"
Previous message: Javier Martinez Canillas: "[PATCH 2/2] drm: Make fbdev emulation depend on FB_CORE instead of FB"
In reply to: Javier Martinez Canillas: "[PATCH 2/2] drm: Make fbdev emulation depend on FB_CORE instead of FB"
Next in thread: Arnd Bergmann: "Re: [PATCH 1/2] fbdev: Split frame buffer support in FB and FB_CORE symbols"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]