[GIT PULL] TTY/Serial driver updates for 6.5-rc1

From: Greg KH
Date: Mon Jul 03 2023 - 06:10:17 EST

Next message: Greg KH: "[GIT PULL] USB/Thunderbolt driver updates for 6.5-rc1"
Previous message: Mark Rutland: "Re: [PATCH 2/2] perf: pmuv3: Add Cortex-A520, Cortex-A715, and Cortex-A720 PMUs"
Next in thread: pr-tracker-bot: "Re: [GIT PULL] TTY/Serial driver updates for 6.5-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The following changes since commit 9561de3a55bed6bdd44a12820ba81ec416e705a7:

Linux 6.4-rc5 (2023-06-04 14:04:27 -0400)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-6.5-rc1

for you to fetch changes up to e534755c9412be07f579acd2947401a9f87a33c8:

tty_audit: make data of tty_audit_log() const (2023-06-21 17:57:29 +0200)

----------------------------------------------------------------
TTY/Serial driver updates for 6.5-rc1.

Here is the big set of tty/serial driver updates for 6.5-rc1.

Included in here are:
- tty_audit code cleanups from Jiri
- more 8250 cleanups from Ilpo
- samsung_tty driver bugfixes
- 8250 lock port updates
- usual fsl_lpuart driver updates and fixes
- other small serial driver fixes and updates, full details in the
shortlog.

All of these have been in linux-next for a while with no reported
issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

----------------------------------------------------------------
Arnd Bergmann (1):
serial: 8250: omap: convert to modern PM ops

Chen-Yu Tsai (1):
serial: 8250_mtk: Simplify clock sequencing and runtime PM

Christophe JAILLET (3):
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
tty: serial: samsung_tty: Use abs() to simplify some code

Dan Carpenter (3):
serial: core: don't kfree device managed data
serial: core: fix -EPROBE_DEFER handling in init
serial: atmel: don't enable IRQs prematurely

Geert Uytterhoeven (1):
serial: 8250: omap: Move uart_write() inside PM section

Greg Kroah-Hartman (2):
Merge 6.4-rc3 into tty-next
Merge 6.4-rc5 into tty-next

Hongyu Xie (1):
serial: pl011: set UART011_CR_RXE in pl011_set_termios after port shutdown

Hui Li (1):
tty: fix hang on tty device with no_room set

Ilpo Järvinen (6):
serial: 8250: Change dl_read/write to handle value as u32
serial: 8250: Document uart_8250_port's ->dl_read/write()
serial: 8250: Add dl_read/write, bugs and mapsize into plat_serial8250_port
serial: 8250: RT288x/Au1xxx code away from core
serial: 8250_rt288x: Name non-standard divisor latch reg
serial: 8250_rt288x: Remove unnecessary UART_REG_UNMAPPED

Jacky Huang (1):
tty: serial: Add Nuvoton ma35d1 serial driver support

James Hilliard (1):
serial: Indicate fintek option may also be required for RS232 support

Jiaqing Zhao (1):
Revert "8250: add support for ASIX devices with a FIFO bug"

Jiri Slaby (6):
tty_audit: use TASK_COMM_LEN for task comm
tty_audit: use kzalloc() in tty_audit_buf_alloc()
tty_audit: invert the condition in tty_audit_log()
tty_audit: make icanon a bool
tty_audit: make tty pointers in exposed functions const
tty_audit: make data of tty_audit_log() const

John Ogness (8):
serial: 8250: lock port in startup() callbacks
serial: core: lock port for stop_rx() in uart_suspend_port()
serial: 8250: lock port for stop_rx() in omap8250_irq()
serial: core: lock port for start_rx() in uart_resume_port()
serial: 8250: lock port for rx_dma() callback
serial: 8250: lock port for omap8250_restore_regs()
serial: 8250: lock port for UART_IER access in omap8250_irq()
serial: 8250: synchronize and annotate UART_IER access

Martin Fuzzey (1):
tty: serial: imx: fix rs485 rx after tx

Michal Sekletar (2):
tty: tty_io: update timestamps on all device nodes
selftests: tty: add selftest for tty timestamp updates

Raphael Gallais-Pou (1):
serial: st-asc: fix typo in property name

Shenwei Wang (1):
tty: serial: fsl_lpuart: optimize the timer based EOP logic

Sherry Sun (2):
tty: serial: fsl_lpuart: Check the return value of dmaengine_tx_status
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform

Steven Price (1):
serial: core: Don't drop port_mutex in serial_core_remove_one_port

Tony Lindgren (9):
serial: 8250: omap: Fix freeing of resources on failed register
serial: 8250: omap: Fix imprecise external abort for omap_8250_pm()
serial: 8250: omap: Fix life cycle issues for interrupt handlers
serial: 8250: omap: Shut down on remove for console uart
serial: 8250: Allow using ports higher than SERIAL_8250_RUNTIME_UARTS
serial: core: Start managing serial controllers to enable runtime PM
serial: core: Fix probing serial_base_bus devices
serial: core: Fix error handling for serial_core_ctrl_device_add()
serial: 8250_omap: Use force_suspend and resume for system suspend

Uwe Kleine-König (7):
serial: stm32: Ignore return value of uart_remove_one_port() in .remove()
serial: Make uart_remove_one_port() return void
serial: Switch i2c drivers back to use .probe()
serial: 8250-fsl: Expand description of the MPC83xx UART's misbehaviour
powerpc/legacy_serial: Warn about 8250 devices operated without active FSL workarounds
powerpc/legacy_serial: Handle SERIAL_8250_FSL=n build failures
serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE

arch/mips/alchemy/common/platform.c | 10 +-
arch/powerpc/kernel/legacy_serial.c | 14 +-
drivers/tty/n_tty.c | 25 +-
drivers/tty/serial/8250/8250.h | 11 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 3 +
drivers/tty/serial/8250/8250_bcm7271.c | 4 +
drivers/tty/serial/8250/8250_core.c | 91 ++-
drivers/tty/serial/8250/8250_early.c | 21 -
drivers/tty/serial/8250/8250_em.c | 4 +-
drivers/tty/serial/8250/8250_exar.c | 4 +
drivers/tty/serial/8250/8250_fsl.c | 17 +-
drivers/tty/serial/8250/8250_mtk.c | 59 +-
drivers/tty/serial/8250/8250_of.c | 6 +-
drivers/tty/serial/8250/8250_omap.c | 215 ++++---
drivers/tty/serial/8250/8250_pci.c | 19 -
drivers/tty/serial/8250/8250_port.c | 167 +++--
drivers/tty/serial/8250/8250_pxa.c | 2 +-
drivers/tty/serial/8250/8250_rt288x.c | 136 ++++
drivers/tty/serial/8250/8250_uniphier.c | 4 +-
drivers/tty/serial/8250/Kconfig | 16 +-
drivers/tty/serial/8250/Makefile | 1 +
drivers/tty/serial/Kconfig | 23 +
drivers/tty/serial/Makefile | 6 +-
drivers/tty/serial/amba-pl011.c | 7 +
drivers/tty/serial/atmel_serial.c | 9 +-
drivers/tty/serial/clps711x.c | 4 +-
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 5 +-
drivers/tty/serial/fsl_lpuart.c | 57 +-
drivers/tty/serial/imx.c | 22 +-
drivers/tty/serial/lantiq.c | 4 +-
drivers/tty/serial/ma35d1_serial.c | 821 ++++++++++++++++++++++++
drivers/tty/serial/max310x.c | 2 +-
drivers/tty/serial/samsung_tty.c | 19 +-
drivers/tty/serial/sc16is7xx.c | 2 +-
drivers/tty/serial/serial_base.h | 46 ++
drivers/tty/serial/serial_base_bus.c | 205 ++++++
drivers/tty/serial/serial_core.c | 210 +++++-
drivers/tty/serial/serial_ctrl.c | 68 ++
drivers/tty/serial/serial_port.c | 105 +++
drivers/tty/serial/st-asc.c | 6 +-
drivers/tty/serial/stm32-usart.c | 5 +-
drivers/tty/serial/uartlite.c | 12 +-
drivers/tty/serial/xilinx_uartps.c | 5 +-
drivers/tty/tty.h | 11 +-
drivers/tty/tty_audit.c | 43 +-
drivers/tty/tty_io.c | 31 +-
include/linux/serial_8250.h | 45 +-
include/linux/serial_core.h | 7 +-
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/tty/.gitignore | 2 +
tools/testing/selftests/tty/Makefile | 5 +
tools/testing/selftests/tty/tty_tstamp_update.c | 88 +++
52 files changed, 2280 insertions(+), 425 deletions(-)
create mode 100644 drivers/tty/serial/8250/8250_rt288x.c
create mode 100644 drivers/tty/serial/ma35d1_serial.c
create mode 100644 drivers/tty/serial/serial_base.h
create mode 100644 drivers/tty/serial/serial_base_bus.c
create mode 100644 drivers/tty/serial/serial_ctrl.c
create mode 100644 drivers/tty/serial/serial_port.c
create mode 100644 tools/testing/selftests/tty/.gitignore
create mode 100644 tools/testing/selftests/tty/Makefile
create mode 100644 tools/testing/selftests/tty/tty_tstamp_update.c

Next message: Greg KH: "[GIT PULL] USB/Thunderbolt driver updates for 6.5-rc1"
Previous message: Mark Rutland: "Re: [PATCH 2/2] perf: pmuv3: Add Cortex-A520, Cortex-A715, and Cortex-A720 PMUs"
Next in thread: pr-tracker-bot: "Re: [GIT PULL] TTY/Serial driver updates for 6.5-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]