Hi Geert!
On Thu, 2023-07-06 at 17:39 +0200, Geert Uytterhoeven wrote:
Which sh4 platforms in particular?
I booted a kernel with this patch on rts7751r2d (QEMU) and landisk
(physical) two days ago.
I gave it a try with the command line Guenter suggested and indeed the kernel locks
up right here with the patch applied and boots fine without it:
Creating 4 MTD partitions on "physmap-flash":
0x000000000000-0x000000040000 : "U-Boot"
0x000000040000-0x000000080000 : "Environment"
0x000000080000-0x000000240000 : "Kernel"
0x000000240000-0x000001000000 : "Flash_FS"
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:00:01.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip, use 8139cp
sm501-usb sm501-usb: SM501 OHCI
sm501-usb sm501-usb: new USB bus registered, assigned bus number 1
sm501-usb sm501-usb: irq 116, io mem 0x13e40000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: SM501 OHCI
usb usb1: Manufacturer: Linux 6.4.0-12069-gc17414a273b8 ohci_hcd
usb usb1: SerialNumber: sm501-usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
rtc-r9701 spi0.0: cannot read RTC register
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered PF_PACKET protocol family
heartbeat: version 0.1.2 loaded
ata1: found unknown device (class 0)
(stops here)
Using rts7751r2dplus_defconfig and the following command line:
qemu-system-sh4 -M r2d -kernel vmlinuz-6.5-rc1 -hda debian_sid_sh4_standard.qcow2 -no-reboot -device rtl8139,netdev=net0 -netdev user,id=net0 -append "root=/dev/sda1 console=ttySC1,115200
earlycon=scif,mmio16,0xffe80000 noiotrap" -serial null -serial stdio -nographic -monitor null
And using this old qcow2 image:
https://people.debian.org/~aurel32/qemu/sh4/debian_sid_sh4_standard.qcow2
Maybe it's a configuration issue if it works for you?