[PATCH AUTOSEL 4.14 1/4] wifi: rtw89: 8851be: add 8851BE PCI entry and fill PCI capabilities

[Sasha Levin]

From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>

[ Upstream commit 99ff8da56322cda9eb9b37021e27b127c2d1cad8 ]

Add PCI entry to 8851BE with its device ID 10ec:b851, also fill PCI info
according to its capabilities.

Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230421024551.29994-3-pkshih@xxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 .../net/wireless/realtek/rtw89/rtw8851be.c    | 86 +++++++++++++++++++
 1 file changed, 86 insertions(+)
 create mode 100644 drivers/net/wireless/realtek/rtw89/rtw8851be.c

diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851be.c b/drivers/net/wireless/realtek/rtw89/rtw8851be.c
new file mode 100644
index 0000000000000..0f7711c50bd15
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851be.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright(c) 2022-2023  Realtek Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "pci.h"
+#include "reg.h"
+#include "rtw8851b.h"
+
+static const struct rtw89_pci_info rtw8851b_pci_info = {
+	.txbd_trunc_mode	= MAC_AX_BD_TRUNC,
+	.rxbd_trunc_mode	= MAC_AX_BD_TRUNC,
+	.rxbd_mode		= MAC_AX_RXBD_PKT,
+	.tag_mode		= MAC_AX_TAG_MULTI,
+	.tx_burst		= MAC_AX_TX_BURST_2048B,
+	.rx_burst		= MAC_AX_RX_BURST_128B,
+	.wd_dma_idle_intvl	= MAC_AX_WD_DMA_INTVL_256NS,
+	.wd_dma_act_intvl	= MAC_AX_WD_DMA_INTVL_256NS,
+	.multi_tag_num		= MAC_AX_TAG_NUM_8,
+	.lbc_en			= MAC_AX_PCIE_ENABLE,
+	.lbc_tmr		= MAC_AX_LBC_TMR_2MS,
+	.autok_en		= MAC_AX_PCIE_DISABLE,
+	.io_rcy_en		= MAC_AX_PCIE_DISABLE,
+	.io_rcy_tmr		= MAC_AX_IO_RCY_ANA_TMR_6MS,
+
+	.init_cfg_reg		= R_AX_PCIE_INIT_CFG1,
+	.txhci_en_bit		= B_AX_TXHCI_EN,
+	.rxhci_en_bit		= B_AX_RXHCI_EN,
+	.rxbd_mode_bit		= B_AX_RXBD_MODE,
+	.exp_ctrl_reg		= R_AX_PCIE_EXP_CTRL,
+	.max_tag_num_mask	= B_AX_MAX_TAG_NUM,
+	.rxbd_rwptr_clr_reg	= R_AX_RXBD_RWPTR_CLR,
+	.txbd_rwptr_clr2_reg	= 0,
+	.dma_stop1		= {R_AX_PCIE_DMA_STOP1, B_AX_TX_STOP1_MASK_V1},
+	.dma_stop2		= {0},
+	.dma_busy1		= {R_AX_PCIE_DMA_BUSY1, DMA_BUSY1_CHECK_V1},
+	.dma_busy2_reg		= 0,
+	.dma_busy3_reg		= R_AX_PCIE_DMA_BUSY1,
+
+	.rpwm_addr		= R_AX_PCIE_HRPWM,
+	.cpwm_addr		= R_AX_CPWM,
+	.tx_dma_ch_mask		= BIT(RTW89_TXCH_ACH4) | BIT(RTW89_TXCH_ACH5) |
+				  BIT(RTW89_TXCH_ACH6) | BIT(RTW89_TXCH_ACH7) |
+				  BIT(RTW89_TXCH_CH10) | BIT(RTW89_TXCH_CH11),
+	.bd_idx_addr_low_power	= NULL,
+	.dma_addr_set		= &rtw89_pci_ch_dma_addr_set,
+	.bd_ram_table		= &rtw89_bd_ram_table_single,
+
+	.ltr_set		= rtw89_pci_ltr_set,
+	.fill_txaddr_info	= rtw89_pci_fill_txaddr_info,
+	.config_intr_mask	= rtw89_pci_config_intr_mask,
+	.enable_intr		= rtw89_pci_enable_intr,
+	.disable_intr		= rtw89_pci_disable_intr,
+	.recognize_intrs	= rtw89_pci_recognize_intrs,
+};
+
+static const struct rtw89_driver_info rtw89_8851be_info = {
+	.chip = &rtw8851b_chip_info,
+	.bus = {
+		.pci = &rtw8851b_pci_info,
+	},
+};
+
+static const struct pci_device_id rtw89_8851be_id_table[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xb851),
+		.driver_data = (kernel_ulong_t)&rtw89_8851be_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(pci, rtw89_8851be_id_table);
+
+static struct pci_driver rtw89_8851be_driver = {
+	.name		= "rtw89_8851be",
+	.id_table	= rtw89_8851be_id_table,
+	.probe		= rtw89_pci_probe,
+	.remove		= rtw89_pci_remove,
+	.driver.pm	= &rtw89_pm_ops,
+};
+module_pci_driver(rtw89_8851be_driver);
+
+MODULE_AUTHOR("Realtek Corporation");
+MODULE_DESCRIPTION("Realtek 802.11ax wireless 8851BE driver");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
2.39.2