[PATCH v2 0/2] usb: typec: qcom-pmic-typec: enable DP support

[Dmitry Baryshkov]

To enable DisplayPort on the platforms supported by qcom-pmic-typec
driver, we need to register a corresponding drm_bridge for this device
and also be able to send the OOB hotplug event to the corresponding DRM
connector. All this is implemented by [1], but there is no direct
dependency on that patchset.

[1] https://patchwork.freedesktop.org/series/120393/

Changes since v1:
- Properly handle CONFIG_DRM dependency. Disallow building DRM as a
  module if qcom-pmic-typec driver is built-in (Bryan).

Dmitry Baryshkov (2):
  usb: typec: altmodes/displayport: add support for embedded DP cases
  usb: typec: qcom-pmic-typec: register drm_bridge

 drivers/usb/typec/altmodes/displayport.c      |  5 ++-
 drivers/usb/typec/tcpm/Kconfig                |  1 +
 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 39 +++++++++++++++++++
 3 files changed, 44 insertions(+), 1 deletion(-)

-- 
2.39.2