Re: [PATCH V2 2/2] pinctrl: Add driver support for Amlogic C3 SoCs

[Andy Shevchenko]

On Mon, Jul 10, 2023 at 7:28 AM Huqiang Qin <huqiang.qin@xxxxxxxxxxx> wrote:
>
> Add a new pinctrl driver for Amlogic C3 SoCs which share
> the same register layout as the previous Amloigc S4.

...

> +#include <dt-bindings/gpio/amlogic-c3-gpio.h>

Seems some headers are missing. The rule of thumb is to include
headers the code uses directly.
Moreover, using a "proxy" header is not the best idea.

kernel.h // ARRAY_SIZE()
mod_devicetable.h // of_device_id
module.h
platform_device.h

pinctrl/pinctrl.h

> +#include "pinctrl-meson.h"
> +#include "pinctrl-meson-axg-pmx.h"

With the above, it might be that existing inclusions become unused, so
drop them in such a case.

...

> +static struct meson_pmx_func c3_periphs_functions[] = {
> +       FUNCTION(gpio_periphs),
> +       FUNCTION(uart_a),
> +       FUNCTION(uart_b),
> +       FUNCTION(uart_c),
> +       FUNCTION(uart_d),
> +       FUNCTION(uart_e),
> +       FUNCTION(i2c0),
> +       FUNCTION(i2c1),
> +       FUNCTION(i2c2),
> +       FUNCTION(i2c3),
> +       FUNCTION(i2c_slave),
> +       FUNCTION(pwm_a),
> +       FUNCTION(pwm_b),
> +       FUNCTION(pwm_c),
> +       FUNCTION(pwm_d),
> +       FUNCTION(pwm_e),
> +       FUNCTION(pwm_f),
> +       FUNCTION(pwm_g),
> +       FUNCTION(pwm_h),
> +       FUNCTION(pwm_i),
> +       FUNCTION(pwm_j),
> +       FUNCTION(pwm_k),
> +       FUNCTION(pwm_l),
> +       FUNCTION(pwm_m),
> +       FUNCTION(pwm_n),
> +       FUNCTION(pwm_c_hiz),
> +       FUNCTION(ir_out),
> +       FUNCTION(ir_in),
> +       FUNCTION(jtag_a),
> +       FUNCTION(jtag_b),
> +       FUNCTION(gen_clk),
> +       FUNCTION(clk12_24),
> +       FUNCTION(clk_32k_in),
> +       FUNCTION(emmc),
> +       FUNCTION(nand),
> +       FUNCTION(spif),
> +       FUNCTION(spi_a),
> +       FUNCTION(spi_b),
> +       FUNCTION(sdcard),
> +       FUNCTION(sdio),
> +       FUNCTION(pdm),
> +       FUNCTION(eth),
> +       FUNCTION(mclk_0),
> +       FUNCTION(mclk_1),
> +       FUNCTION(tdm),
> +       FUNCTION(lcd)

+ trailing comma. The rule of thumb is to add a comma when it's not a
terminator entry.

> +};

-- 
With Best Regards,
Andy Shevchenko