[PATCH v5 0/5] Add peripherals for J784S4

[Jayesh Choudhary]

This series adds support for:
- SERDES, WIZ DT nodes, Serdes lane control mux
- MAIN CPSW2G nodes
- DSS and DisplayPort-0 nodes

Changelog v4->v5:
- rebased the patches on linux-next tip.

Changelog v3->v4:
- add reg property to serdes_ln_ctrl and fix the node name again to
  get rid of dtbs_check error.
- reorder reg, reg-names and ranges property for main_cpsw1.
- correct the order for clocks in serdes_wiz nodes to fix dtbs_check
  warnings.
- fix indentation in reg, reg-names and clock property for dss node.
- add comments for the reg type in dss registers.

Changelog v3->v2:
- fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes
  (Checked all the changes of the series with W=12 option during build)
- added clock-frequency for serdes_refclk along with other EVM changes
  This refclk is being used by all the instances of serdes_wiz which
  are disabled by default. So configuring refclk when the serdes nodes
  are used for the first time is okay.

Changelog v1->v2:
- Moved J784S4 EVM changes together to the last patch
  (Suggested by Andrew)

v4 patch link:
<https://lore.kernel.org/all/20230425131607.290707-1-j-choudhary@xxxxxx/>

Rahul T R (2):
  arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
  arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0

Siddharth Vadapalli (3):
  arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane
    mux
  arm64: dts: ti: k3-j784s4: Add Main CPSW2G node
  arm64: dts: ti: k3-j784s4: Add WIZ and SERDES PHY nodes

 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts   | 164 ++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 335 +++++++++++++++++++++
 2 files changed, 499 insertions(+)

-- 
2.25.1