Re: [PATCH V8 06/23] mmc: core: Support UHS-II card control and access
From: Adrian Hunter
Date: Mon Jul 10 2023 - 09:24:39 EST
On 21/06/23 13:01, Victor Shih wrote:
> From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
>
> Embed UHS-II access/control functionality into the MMC request
> processing flow.
>
> Updates in V8:
> - Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
> - Modify return value in sd_uhs2_attach().
>
> Updates in V7:
> - Add mmc_uhs2_card_prepare_cmd helper function in sd_ops.h.
> - Drop uhs2_state in favor of ios->timing.
> - Remove unnecessary functions.
>
> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> Signed-off-by: Jason Lai <jason.lai@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> ---
> drivers/mmc/core/block.c | 18 +-
> drivers/mmc/core/core.c | 8 +
> drivers/mmc/core/mmc_ops.c | 25 +-
> drivers/mmc/core/mmc_ops.h | 1 +
> drivers/mmc/core/sd.c | 13 +-
> drivers/mmc/core/sd.h | 4 +
> drivers/mmc/core/sd_ops.c | 11 +
> drivers/mmc/core/sd_ops.h | 18 +
> drivers/mmc/core/sd_uhs2.c | 1137 +++++++++++++++++++++++++++++++++++-
> 9 files changed, 1176 insertions(+), 59 deletions(-)
>
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index 2e9d3760c202..013ab071db9b 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -918,15 +918,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
>
> struct scatterlist sg;
>
> - cmd.opcode = MMC_APP_CMD;
> - cmd.arg = card->rca << 16;
> - cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> -
> - err = mmc_wait_for_cmd(card->host, &cmd, 0);
> - if (err)
> - return err;
> - if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
> - return -EIO;
> + err = mmc_app_cmd(card->host, card);
> + if (err)
> + return err;
>
> memset(&cmd, 0, sizeof(struct mmc_command));
>
> @@ -1612,6 +1606,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> struct request *req = mmc_queue_req_to_req(mqrq);
> struct mmc_blk_data *md = mq->blkdata;
> bool do_rel_wr, do_data_tag;
> + bool do_multi;
> +
> + do_multi = (card->host->flags & MMC_UHS2_SD_TRAN) ? true : false;
>
> mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag);
>
> @@ -1622,7 +1619,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> brq->cmd.arg <<= 9;
> brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
>
> - if (brq->data.blocks > 1 || do_rel_wr) {
> + if (brq->data.blocks > 1 || do_rel_wr || do_multi) {
> /* SPI multiblock writes terminate using a special
> * token, not a STOP_TRANSMISSION request.
> */
> @@ -1635,6 +1632,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> brq->mrq.stop = NULL;
> readcmd = MMC_READ_SINGLE_BLOCK;
> writecmd = MMC_WRITE_BLOCK;
> + brq->cmd.uhs2_tmode0_flag = 1;
> }
> brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 7b8227e7ed26..04783f37da92 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -334,6 +334,8 @@ static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq)
>
> int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> {
> + struct uhs2_command uhs2_cmd;
> + __be32 payload[4]; /* for maximum size */
> int err;
>
> init_completion(&mrq->cmd_completion);
> @@ -351,6 +353,8 @@ int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> if (err)
> return err;
>
> + mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> +
> led_trigger_event(host->led, LED_FULL);
> __mmc_start_request(host, mrq);
__mmc_start_request() is also called by mmc_wait_for_req_done()
but uhs2_cmd is local to mmc_start_request(), so if mmc_wait_for_req_done()
is ever called in UHS2 case with cmd->retries, it looks like
host controller might try to access uhs2_cmd which is no
longer valid?
>
> @@ -430,6 +434,8 @@ EXPORT_SYMBOL(mmc_wait_for_req_done);
> */
> int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
> {
> + struct uhs2_command uhs2_cmd;
> + __be32 payload[4]; /* for maximum size */
> int err;
>
> /*
> @@ -450,6 +456,8 @@ int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
> if (err)
> goto out_err;
>
> + mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> +
> err = host->cqe_ops->cqe_request(host, mrq);
> if (err)
> goto out_err;
> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> index 3b3adbddf664..8ae205a07f9b 100644
> --- a/drivers/mmc/core/mmc_ops.c
> +++ b/drivers/mmc/core/mmc_ops.c
> @@ -144,10 +144,24 @@ int mmc_set_dsr(struct mmc_host *host)
> return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
> }
>
> +int __mmc_go_idle(struct mmc_host *host)
> +{
> + struct mmc_command cmd = {};
> + int err;
> +
> + cmd.opcode = MMC_GO_IDLE_STATE;
> + cmd.arg = 0;
> + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + mmc_delay(1);
> +
> + return err;
> +}
> +
> int mmc_go_idle(struct mmc_host *host)
> {
> int err;
> - struct mmc_command cmd = {};
>
> /*
> * Non-SPI hosts need to prevent chipselect going active during
> @@ -163,13 +177,7 @@ int mmc_go_idle(struct mmc_host *host)
> mmc_delay(1);
> }
>
> - cmd.opcode = MMC_GO_IDLE_STATE;
> - cmd.arg = 0;
> - cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
> -
> - err = mmc_wait_for_cmd(host, &cmd, 0);
> -
> - mmc_delay(1);
> + err = __mmc_go_idle(host);
>
> if (!mmc_host_is_spi(host)) {
> mmc_set_chip_select(host, MMC_CS_DONTCARE);
> @@ -300,6 +308,7 @@ int mmc_send_adtc_data(struct mmc_card *card, struct mmc_host *host, u32 opcode,
> * not R1 plus a data block.
> */
> cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> + cmd.uhs2_tmode0_flag = 1;
>
> data.blksz = len;
> data.blocks = 1;
> diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
> index 09ffbc00908b..abda7492d578 100644
> --- a/drivers/mmc/core/mmc_ops.h
> +++ b/drivers/mmc/core/mmc_ops.h
> @@ -25,6 +25,7 @@ struct mmc_command;
> int mmc_select_card(struct mmc_card *card);
> int mmc_deselect_cards(struct mmc_host *host);
> int mmc_set_dsr(struct mmc_host *host);
> +int __mmc_go_idle(struct mmc_host *host);
> int mmc_go_idle(struct mmc_host *host);
> int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
> int mmc_set_relative_addr(struct mmc_card *card);
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index 72b664ed90cf..2ff9c37a1975 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -207,7 +207,7 @@ static int mmc_decode_csd(struct mmc_card *card)
> /*
> * Given a 64-bit response, decode to our card SCR structure.
> */
> -static int mmc_decode_scr(struct mmc_card *card)
> +int mmc_decode_scr(struct mmc_card *card)
> {
> struct sd_scr *scr = &card->scr;
> unsigned int scr_struct;
> @@ -904,7 +904,7 @@ int mmc_sd_get_csd(struct mmc_card *card)
> return 0;
> }
>
> -static int mmc_sd_get_ro(struct mmc_host *host)
> +int mmc_sd_get_ro(struct mmc_host *host)
> {
> int ro;
>
> @@ -1616,11 +1616,6 @@ static void mmc_sd_detect(struct mmc_host *host)
> }
> }
>
> -static int sd_can_poweroff_notify(struct mmc_card *card)
> -{
> - return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
> -}
> -
> static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
> {
> struct sd_busy_data *data = cb_data;
> @@ -1644,7 +1639,7 @@ static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
> return 0;
> }
>
> -static int sd_poweroff_notify(struct mmc_card *card)
> +int sd_poweroff_notify(struct mmc_card *card)
> {
> struct sd_busy_data cb_data;
> u8 *reg_buf;
> @@ -1692,7 +1687,7 @@ static int _mmc_sd_suspend(struct mmc_host *host)
> if (mmc_card_suspended(card))
> goto out;
>
> - if (sd_can_poweroff_notify(card))
> + if (mmc_sd_can_poweroff_notify(card))
> err = sd_poweroff_notify(card);
> else if (!mmc_host_is_spi(host))
> err = mmc_deselect_cards(host);
> diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h
> index 1af5a038bae9..d31259919ee5 100644
> --- a/drivers/mmc/core/sd.h
> +++ b/drivers/mmc/core/sd.h
> @@ -11,10 +11,14 @@ struct mmc_card;
>
> int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr);
> int mmc_sd_get_csd(struct mmc_card *card);
> +int mmc_sd_get_ro(struct mmc_host *host);
> void mmc_decode_cid(struct mmc_card *card);
> int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
> bool reinit);
> unsigned mmc_sd_get_max_clock(struct mmc_card *card);
> int mmc_sd_switch_hs(struct mmc_card *card);
>
> +/* These call back functions were also used by UHS2 sd card */
> +int sd_poweroff_notify(struct mmc_card *card);
> +
> #endif
> diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
> index ef8d1dce5af1..1f9580491ad0 100644
> --- a/drivers/mmc/core/sd_ops.c
> +++ b/drivers/mmc/core/sd_ops.c
> @@ -27,6 +27,15 @@ int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
> if (WARN_ON(card && card->host != host))
> return -EINVAL;
>
> + /*
> + * UHS2 packet has APP bit so only set APP_CMD flag here.
> + * Will set the APP bit when assembling UHS2 packet.
> + */
> + if (host->flags & MMC_UHS2_SD_TRAN) {
> + host->uhs2_app_cmd = true;
> + return 0;
> + }
> +
> cmd.opcode = MMC_APP_CMD;
>
> if (card) {
> @@ -281,6 +290,7 @@ int mmc_app_send_scr(struct mmc_card *card)
> cmd.opcode = SD_APP_SEND_SCR;
> cmd.arg = 0;
> cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> + cmd.uhs2_tmode0_flag = 1;
>
> data.blksz = 8;
> data.blocks = 1;
> @@ -344,6 +354,7 @@ int mmc_app_sd_status(struct mmc_card *card, void *ssr)
> cmd.opcode = SD_APP_SD_STATUS;
> cmd.arg = 0;
> cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC;
> + cmd.uhs2_tmode0_flag = 1;
>
> data.blksz = 64;
> data.blocks = 1;
> diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h
> index 3ba7b3cf4652..8c2da57ca2c2 100644
> --- a/drivers/mmc/core/sd_ops.h
> +++ b/drivers/mmc/core/sd_ops.h
> @@ -11,6 +11,7 @@
> #include <linux/types.h>
>
> struct mmc_card;
> +struct mmc_command;
> struct mmc_host;
>
> int mmc_app_set_bus_width(struct mmc_card *card, int width);
> @@ -19,10 +20,27 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr);
> int mmc_send_if_cond_pcie(struct mmc_host *host, u32 ocr);
> int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
> int mmc_app_send_scr(struct mmc_card *card);
> +int mmc_decode_scr(struct mmc_card *card);
> int mmc_sd_switch(struct mmc_card *card, int mode, int group,
> u8 value, u8 *resp);
> int mmc_app_sd_status(struct mmc_card *card, void *ssr);
> int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card);
> +void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq);
> +
> +static inline void mmc_uhs2_card_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq,
> + struct uhs2_command uhs2_cmd, __be32 payload[4])
> +{
> + if (host->flags & MMC_UHS2_SD_TRAN) {
> + uhs2_cmd.payload = payload;
> + mrq->cmd->uhs2_cmd = &uhs2_cmd;
> + mmc_uhs2_prepare_cmd(host, mrq);
> + }
> +}
> +
> +static inline int mmc_sd_can_poweroff_notify(struct mmc_card *card)
> +{
> + return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
> +}
>
> #endif
>
> diff --git a/drivers/mmc/core/sd_uhs2.c b/drivers/mmc/core/sd_uhs2.c
> index 06b2aab52b93..0a1b00b59499 100644
> --- a/drivers/mmc/core/sd_uhs2.c
> +++ b/drivers/mmc/core/sd_uhs2.c
> @@ -1,23 +1,51 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> * Copyright (C) 2021 Linaro Ltd
> - *
> * Author: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> *
> + * Copyright (C) 2014 Intel Corp, All Rights Reserved.
> + * Author: Yi Sun <yi.y.sun@xxxxxxxxx>
> + *
> + * Copyright (C) 2020 Genesys Logic, Inc.
> + * Authors: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> + *
> + * Copyright (C) 2020 Linaro Limited
> + * Author: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> + *
> + * Copyright (C) 2022 Genesys Logic, Inc.
> + * Authors: Jason Lai <jason.lai@xxxxxxxxxxxxxxxxxxx>
> + *
> + * Copyright (C) 2023 Genesys Logic, Inc.
> + * Authors: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> + *
> * Support for SD UHS-II cards
> */
> #include <linux/err.h>
> +#include <linux/pm_runtime.h>
>
> #include <linux/mmc/host.h>
> #include <linux/mmc/card.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/sd.h>
> +#include <linux/mmc/sd_uhs2.h>
>
> +#include "card.h"
> #include "core.h"
> #include "bus.h"
> #include "sd.h"
> +#include "sd_ops.h"
> #include "mmc_ops.h"
>
> +#define UHS2_WAIT_CFG_COMPLETE_PERIOD_US (1 * 1000) /* 1ms */
> +#define UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS 100 /* 100ms */
> +
> static const unsigned int sd_uhs2_freqs[] = { 52000000, 26000000 };
>
> +struct sd_uhs2_wait_active_state_data {
> + struct mmc_host *host;
> + struct mmc_command *cmd;
> +};
> +
> static int sd_uhs2_power_up(struct mmc_host *host)
> {
> int err;
> @@ -50,6 +78,43 @@ static int sd_uhs2_power_off(struct mmc_host *host)
> return host->ops->uhs2_control(host, UHS2_SET_IOS);
> }
>
> +/*
> + * sd_uhs2_cmd_assemble() - build up UHS-II command packet which is embedded in
> + * mmc_command structure
> + * @cmd: MMC command to executed
> + * @uhs2_cmd: UHS2 command corresponded to MMC command
> + * @header: Header field of UHS-II command cxpacket
> + * @arg: Argument field of UHS-II command packet
> + * @payload: Payload field of UHS-II command packet
> + * @plen: Payload length
> + * @resp: Response buffer is allocated by caller and it is used to keep
> + * the response of CM-TRAN command. For SD-TRAN command, uhs2_resp
> + * should be null and SD-TRAN command response should be stored in
> + * resp of mmc_command.
> + * @resp_len: Response buffer length
> + *
> + * The uhs2_command structure contains message packets which are transmited/
> + * received on UHS-II bus. This function fills in the contents of uhs2_command
> + * structure and embededs UHS2 command into mmc_command structure, which is used
> + * in legacy SD operation functions.
> + *
> + */
> +static void sd_uhs2_cmd_assemble(struct mmc_command *cmd,
> + struct uhs2_command *uhs2_cmd,
> + u16 header, u16 arg, __be32 *payload,
> + u8 plen, u8 *resp, u8 resp_len)
> +{
> + uhs2_cmd->header = header;
> + uhs2_cmd->arg = arg;
> + uhs2_cmd->payload = payload;
> + uhs2_cmd->payload_len = plen * sizeof(u32);
> + uhs2_cmd->packet_len = uhs2_cmd->payload_len + 4;
> +
> + cmd->uhs2_cmd = uhs2_cmd;
> + cmd->uhs2_resp = resp;
> + cmd->uhs2_resp_len = resp_len;
> +}
> +
> /*
> * Run the phy initialization sequence, which mainly relies on the UHS-II host
> * to check that we reach the expected electrical state, between the host and
> @@ -57,7 +122,15 @@ static int sd_uhs2_power_off(struct mmc_host *host)
> */
> static int sd_uhs2_phy_init(struct mmc_host *host)
> {
> - return 0;
> + int err = 0;
> +
> + err = host->ops->uhs2_control(host, UHS2_PHY_INIT);
> + if (err) {
> + pr_err("%s: failed to initial phy for UHS-II!\n",
> + mmc_hostname(host));
> + }
> +
> + return err;
> }
>
> /*
> @@ -66,6 +139,82 @@ static int sd_uhs2_phy_init(struct mmc_host *host)
> */
> static int sd_uhs2_dev_init(struct mmc_host *host)
> {
> + struct mmc_command cmd = {0};
> + struct uhs2_command uhs2_cmd = {};
> + u32 cnt;
> + u32 dap, gap, resp_gap;
> + u16 header, arg;
> + __be32 payload[UHS2_DEV_INIT_PAYLOAD_LEN];
> + u8 gd = 0;
> + u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0};
> + int err;
> +
> + dap = host->uhs2_caps.dap;
> + gap = host->uhs2_caps.gap;
> +
> + /*
> + * Refer to UHS-II Addendum Version 1.02 Figure 6-21 to see DEVICE_INIT CCMD format.
> + * Head:
> + * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> + * - IOADR = CMD_BASE + 002h
> + * Payload:
> + * - bit [3:0] : GAP(Group Allocated Power)
> + * - bit [7:4] : GD(Group Descriptor)
> + * - bit [11] : Complete Flag
> + * - bit [15:12]: DAP(Device Allocated Power)
> + */
> + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD;
> + arg = ((UHS2_DEV_CMD_DEVICE_INIT & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_WRITE |
> + UHS2_NATIVE_CMD_PLEN_4B |
> + (UHS2_DEV_CMD_DEVICE_INIT >> 8);
> +
> + /*
> + * Refer to UHS-II Addendum Version 1.02 section 6.3.1.
> + * Max. time from DEVICE_INIT CCMD EOP reception on Device
> + * Rx to its SOP transmission on Device Tx(Tfwd_init_cmd) is
> + * 1 second.
> + */
> + cmd.busy_timeout = 1000;
> +
> + /*
> + * Refer to UHS-II Addendum Version 1.02 section 6.2.6.3.
> + * When the number of the DEVICE_INIT commands is reach to
> + * 30 tiems, Host shall stop issuing DEVICE_INIT command
> + * and regard it as an error.
> + */
> + for (cnt = 0; cnt < 30; cnt++) {
> + payload[0] = ((dap & 0xF) << 12) |
> + UHS2_DEV_INIT_COMPLETE_FLAG |
> + ((gd & 0xF) << 4) |
> + (gap & 0xF);
> +
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg,
> + payload, UHS2_DEV_INIT_PAYLOAD_LEN,
> + resp, UHS2_DEV_INIT_RESP_LEN);
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + if (err) {
> + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + if (resp[3] != (UHS2_DEV_CMD_DEVICE_INIT & 0xFF)) {
> + pr_err("%s: DEVICE_INIT response is wrong!\n",
> + mmc_hostname(host));
> + return -EIO;
> + }
> +
> + if (resp[5] & 0x8) {
> + host->uhs2_caps.group_desc = gd;
> + return 0;
> + }
> + resp_gap = resp[4] & 0x0F;
> + if (gap == resp_gap)
> + gd++;
> + }
> +
> return 0;
> }
>
> @@ -76,6 +225,52 @@ static int sd_uhs2_dev_init(struct mmc_host *host)
> */
> static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id)
> {
> + struct mmc_command cmd = {0};
> + struct uhs2_command uhs2_cmd = {};
> + u16 header, arg;
> + __be32 payload[UHS2_DEV_ENUM_PAYLOAD_LEN];
> + u8 id_f = 0xF, id_l = 0x0;
> + u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0};
> + int err;
> +
> + /*
> + * Refer to UHS-II Addendum Version 1.02 Figure 6-28 to see ENUMERATE CCMD format.
> + * Header:
> + * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> + * - IOADR = CMD_BASE + 003h
> + * Payload:
> + * - bit [3:0]: ID_L(Last Node ID)
> + * - bit [7:4]: ID_F(First Node ID)
> + */
> + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD;
> + arg = ((UHS2_DEV_CMD_ENUMERATE & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_WRITE |
> + UHS2_NATIVE_CMD_PLEN_4B |
> + (UHS2_DEV_CMD_ENUMERATE >> 8);
> +
> + payload[0] = (id_f << 4) | id_l;
> + payload[0] = cpu_to_be32(payload[0]);
> +
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_DEV_ENUM_PAYLOAD_LEN,
> + resp, UHS2_DEV_ENUM_RESP_LEN);
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + if (err) {
> + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + if (resp[3] != (UHS2_DEV_CMD_ENUMERATE & 0xFF)) {
> + pr_err("%s: ENUMERATE response is wrong!\n",
> + mmc_hostname(host));
> + return -EIO;
> + }
> +
> + id_f = (resp[4] >> 4) & 0xF;
> + id_l = resp[4] & 0xF;
> + *node_id = id_f;
> +
> return 0;
> }
>
> @@ -86,6 +281,181 @@ static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id)
> */
> static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card)
> {
> + struct mmc_command cmd = {0};
> + struct uhs2_command uhs2_cmd = {};
> + u16 header, arg;
> + u32 cap;
> + int err;
> +
> + /*
> + * Use Control Read CCMD to read Generic Capability from Configuration Register.
> + * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> + * - IOADR = Generic Capability Register(CFG_BASE + 000h)
> + */
> + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id;
> + arg = ((UHS2_DEV_CONFIG_GEN_CAPS & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_READ |
> + UHS2_NATIVE_CMD_PLEN_4B |
> + (UHS2_DEV_CONFIG_GEN_CAPS >> 8);
> +
> + /*
> + * There is no payload because per spec, there should be
> + * no payload field for read CCMD.
> + * Plen is set in arg. Per spec, plen for read CCMD
> + * represents the len of read data which is assigned in payload
> + * of following RES (p136).
> + */
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + if (err) {
> + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + /*
> + * Generic Capability Register:
> + * bit [7:0] : Reserved
> + * bit [13:8] : Device-Specific Number of Lanes and Functionality
> + * bit 8: 2L-HD
> + * bit 9: 2D-1U FD
> + * bit 10: 1D-2U FD
> + * bit 11: 2D-2U FD
> + * Others: Reserved
> + * bit [14] : DADR Length
> + * 0: 4 bytes
> + * 1: Reserved
> + * bit [23:16]: Application Type
> + * bit 16: 0=Non-SD memory, 1=SD memory
> + * bit 17: 0=Non-SDIO, 1=SDIO
> + * bit 18: 0=Card, 1=Embedded
> + * bit [63:24]: Reserved
> + */
> + cap = cmd.resp[0];
> + card->uhs2_config.n_lanes =
> + (cap >> UHS2_DEV_CONFIG_N_LANES_POS) &
> + UHS2_DEV_CONFIG_N_LANES_MASK;
> + card->uhs2_config.dadr_len =
> + (cap >> UHS2_DEV_CONFIG_DADR_POS) &
> + UHS2_DEV_CONFIG_DADR_MASK;
> + card->uhs2_config.app_type =
> + (cap >> UHS2_DEV_CONFIG_APP_POS) &
> + UHS2_DEV_CONFIG_APP_MASK;
> +
> + /*
> + * Use Control Read CCMD to read PHY Capability from Configuration Register.
> + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> + * - IOADR = PHY Capability Register(CFG_BASE + 002h)
> + */
> + arg = ((UHS2_DEV_CONFIG_PHY_CAPS & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_READ |
> + UHS2_NATIVE_CMD_PLEN_8B |
> + (UHS2_DEV_CONFIG_PHY_CAPS >> 8);
> +
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + if (err) {
> + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + /*
> + * PHY Capability Register:
> + * bit [3:0] : PHY Minor Revision
> + * bit [5:4] : PHY Major Revision
> + * bit [15] : Support Hibernate Mode
> + * 0: Not support Hibernate Mode
> + * 1: Support Hibernate Mode
> + * bit [31:16]: Reserved
> + * bit [35:32]: Device-Specific N_LSS_SYN
> + * bit [39:36]: Device-Specific N_LSS_DIR
> + * bit [63:40]: Reserved
> + */
> + cap = cmd.resp[0];
> + card->uhs2_config.phy_minor_rev =
> + cap & UHS2_DEV_CONFIG_PHY_MINOR_MASK;
> + card->uhs2_config.phy_major_rev =
> + (cap >> UHS2_DEV_CONFIG_PHY_MAJOR_POS) &
> + UHS2_DEV_CONFIG_PHY_MAJOR_MASK;
> + card->uhs2_config.can_hibernate =
> + (cap >> UHS2_DEV_CONFIG_CAN_HIBER_POS) &
> + UHS2_DEV_CONFIG_CAN_HIBER_MASK;
> +
> + cap = cmd.resp[1];
> + card->uhs2_config.n_lss_sync =
> + cap & UHS2_DEV_CONFIG_N_LSS_SYN_MASK;
> + card->uhs2_config.n_lss_dir =
> + (cap >> UHS2_DEV_CONFIG_N_LSS_DIR_POS) &
> + UHS2_DEV_CONFIG_N_LSS_DIR_MASK;
> + if (card->uhs2_config.n_lss_sync == 0)
> + card->uhs2_config.n_lss_sync = 16 << 2;
> + else
> + card->uhs2_config.n_lss_sync <<= 2;
> +
> + if (card->uhs2_config.n_lss_dir == 0)
> + card->uhs2_config.n_lss_dir = 16 << 3;
> + else
> + card->uhs2_config.n_lss_dir <<= 3;
> +
> + /*
> + * Use Control Read CCMD to read LINK/TRAN Capability from Configuration Register.
> + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> + * - IOADR = LINK/TRAN Capability Register(CFG_BASE + 004h)
> + */
> + arg = ((UHS2_DEV_CONFIG_LINK_TRAN_CAPS & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_READ |
> + UHS2_NATIVE_CMD_PLEN_8B |
> + (UHS2_DEV_CONFIG_LINK_TRAN_CAPS >> 8);
> +
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + if (err) {
> + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + /*
> + * LINK/TRAN Capability Register:
> + * bit [3:0] : LINK_TRAN Minor Revision
> + * bit [5:4] : LINK/TRAN Major Revision
> + * bit [7:6] : Reserved
> + * bit [15:8] : Device-Specific N_FCU
> + * bit [18:16]: Device Type
> + * 001b=Host
> + * 010b=Device
> + * 011b=Reserved for CMD issuable Device
> + * bit [19] : Reserved
> + * bit [31:20]: Device-Specific MAX_BLKLEN
> + * bit [39:32]: Device-Specific N_DATA_GAP
> + * bit [63:40]: Reserved
> + */
> + cap = cmd.resp[0];
> + card->uhs2_config.link_minor_rev =
> + cap & UHS2_DEV_CONFIG_LT_MINOR_MASK;
> + card->uhs2_config.link_major_rev =
> + (cap >> UHS2_DEV_CONFIG_LT_MAJOR_POS) &
> + UHS2_DEV_CONFIG_LT_MAJOR_MASK;
> + card->uhs2_config.n_fcu =
> + (cap >> UHS2_DEV_CONFIG_N_FCU_POS) &
> + UHS2_DEV_CONFIG_N_FCU_MASK;
> + card->uhs2_config.dev_type =
> + (cap >> UHS2_DEV_CONFIG_DEV_TYPE_POS) &
> + UHS2_DEV_CONFIG_DEV_TYPE_MASK;
> + card->uhs2_config.maxblk_len =
> + (cap >> UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) &
> + UHS2_DEV_CONFIG_MAX_BLK_LEN_MASK;
> +
> + cap = cmd.resp[1];
> + card->uhs2_config.n_data_gap =
> + cap & UHS2_DEV_CONFIG_N_DATA_GAP_MASK;
> + if (card->uhs2_config.n_fcu == 0)
> + card->uhs2_config.n_fcu = 256;
> +
> return 0;
> }
>
> @@ -100,26 +470,357 @@ static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card)
> */
> static int sd_uhs2_config_write(struct mmc_host *host, struct mmc_card *card)
> {
> + struct mmc_command cmd = {0};
> + struct uhs2_command uhs2_cmd = {};
> + u16 header, arg;
> + __be32 payload[UHS2_CFG_WRITE_PAYLOAD_LEN];
> + u8 nMinDataGap;
> + int err;
> + u8 resp[5] = {0};
> +
> + /*
> + * Use Control Write CCMD to set Generic Setting in Configuration Register.
> + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> + * - IOADR = Generic Setting Register(CFG_BASE + 008h)
> + * - Payload = New contents to be written to Generic Setting Register
> + */
> + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id;
> + arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_WRITE |
> + UHS2_NATIVE_CMD_PLEN_8B |
> + (UHS2_DEV_CONFIG_GEN_SET >> 8);
> +
> + /*
> + * Most UHS-II cards only support FD and 2L-HD mode. Other lane numbers
> + * defined in UHS-II addendem Ver1.01 are optional.
> + */
> + host->uhs2_caps.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD;
> + card->uhs2_config.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD;
> +
> + payload[0] = card->uhs2_config.n_lanes_set << UHS2_DEV_CONFIG_N_LANES_POS;
> + payload[1] = 0;
> + payload[0] = cpu_to_be32(payload[0]);
> + payload[1] = cpu_to_be32(payload[1]);
> +
> + /*
> + * There is no payload because per spec, there should be
> + * no payload field for read CCMD.
> + * Plen is set in arg. Per spec, plen for read CCMD
> + * represents the len of read data which is assigned in payload
> + * of following RES (p136).
> + */
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> + NULL, 0);
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + if (err) {
> + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + /*
> + * Use Control Write CCMD to set PHY Setting in Configuration Register.
> + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> + * - IOADR = PHY Setting Register(CFG_BASE + 00Ah)
> + * - Payload = New contents to be written to PHY Setting Register
> + */
> + arg = ((UHS2_DEV_CONFIG_PHY_SET & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_WRITE |
> + UHS2_NATIVE_CMD_PLEN_8B |
> + (UHS2_DEV_CONFIG_PHY_SET >> 8);
> +
> + if (host->uhs2_caps.speed_range == UHS2_DEV_CONFIG_PHY_SET_SPEED_B) {
> + if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD &&
> + host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) {
> + /* Support HD */
> + host->ios.timing = MMC_TIMING_UHS2_SPEED_B_HD;
> + nMinDataGap = 1;
> + } else {
> + /* Only support 2L-FD so far */
> + host->ios.timing = MMC_TIMING_UHS2_SPEED_B;
> + nMinDataGap = 3;
> + }
> + card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_B;
> + } else {
> + if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD &&
> + host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) {
> + /* Support HD */
> + host->ios.timing = MMC_TIMING_UHS2_SPEED_A_HD;
> + nMinDataGap = 1;
> + } else {
> + /* Only support 2L-FD so far */
> + host->ios.timing = MMC_TIMING_UHS2_SPEED_A;
> + nMinDataGap = 3;
> + }
> + card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_A;
> + }
> +
> + payload[0] = card->uhs2_config.speed_range_set << UHS2_DEV_CONFIG_PHY_SET_SPEED_POS;
> +
> + card->uhs2_config.n_lss_sync_set = (max(card->uhs2_config.n_lss_sync,
> + host->uhs2_caps.n_lss_sync) >> 2) &
> + UHS2_DEV_CONFIG_N_LSS_SYN_MASK;
> + host->uhs2_caps.n_lss_sync_set = card->uhs2_config.n_lss_sync_set;
> +
> + card->uhs2_config.n_lss_dir_set = (max(card->uhs2_config.n_lss_dir,
> + host->uhs2_caps.n_lss_dir) >> 3) &
> + UHS2_DEV_CONFIG_N_LSS_DIR_MASK;
> + host->uhs2_caps.n_lss_dir_set = card->uhs2_config.n_lss_dir_set;
> +
> + payload[1] = (card->uhs2_config.n_lss_dir_set << UHS2_DEV_CONFIG_N_LSS_DIR_POS) |
> + card->uhs2_config.n_lss_sync_set;
> + payload[0] = cpu_to_be32(payload[0]);
> + payload[1] = cpu_to_be32(payload[1]);
> +
> + memset(resp, 0, sizeof(resp));
> +
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> + resp, UHS2_CFG_WRITE_PHY_SET_RESP_LEN);
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + if (err) {
> + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + if ((resp[2] & 0x80)) {
> + pr_err("%s: %s: UHS2 CMD not accepted, resp= 0x%x!\n",
> + mmc_hostname(host), __func__, resp[2]);
> + return -EIO;
> + }
> +
> + /*
> + * Use Control Write CCMD to set LINK/TRAN Setting in Configuration Register.
> + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> + * - IOADR = LINK/TRAN Setting Register(CFG_BASE + 00Ch)
> + * - Payload = New contents to be written to LINK/TRAN Setting Register
> + */
> + arg = ((UHS2_DEV_CONFIG_LINK_TRAN_SET & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_WRITE |
> + UHS2_NATIVE_CMD_PLEN_8B |
> + (UHS2_DEV_CONFIG_LINK_TRAN_SET >> 8);
> +
> + if (card->uhs2_config.app_type == UHS2_DEV_CONFIG_APP_SD_MEM)
> + card->uhs2_config.maxblk_len_set = UHS2_DEV_CONFIG_LT_SET_MAX_BLK_LEN;
> + else
> + card->uhs2_config.maxblk_len_set = min(card->uhs2_config.maxblk_len,
> + host->uhs2_caps.maxblk_len);
> + host->uhs2_caps.maxblk_len_set = card->uhs2_config.maxblk_len_set;
> +
> + card->uhs2_config.n_fcu_set = min(card->uhs2_config.n_fcu, host->uhs2_caps.n_fcu);
> + host->uhs2_caps.n_fcu_set = card->uhs2_config.n_fcu_set;
> +
> + card->uhs2_config.n_data_gap_set = max(nMinDataGap, card->uhs2_config.n_data_gap);
> + host->uhs2_caps.n_data_gap_set = card->uhs2_config.n_data_gap_set;
> +
> + host->uhs2_caps.max_retry_set = 3;
> + card->uhs2_config.max_retry_set = host->uhs2_caps.max_retry_set;
> +
> + payload[0] = (card->uhs2_config.maxblk_len_set << UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) |
> + (card->uhs2_config.max_retry_set << UHS2_DEV_CONFIG_LT_SET_MAX_RETRY_POS) |
> + (card->uhs2_config.n_fcu_set << UHS2_DEV_CONFIG_N_FCU_POS);
> + payload[1] = card->uhs2_config.n_data_gap_set;
> + payload[0] = cpu_to_be32(payload[0]);
> + payload[1] = cpu_to_be32(payload[1]);
> +
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> + NULL, 0);
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + if (err) {
> + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + /*
> + * Use Control Write CCMD to set Config Completion(payload bit 63) in Generic Setting
> + * Register.
> + * Header:
> + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> + * - IOADR = PGeneric Setting Register(CFG_BASE + 008h)
> + * Payload:
> + * - bit [63]: Config Completion
> + *
> + * DLSM transits to Active state immediately when Config Completion is set to 1.
> + */
> + arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_WRITE |
> + UHS2_NATIVE_CMD_PLEN_8B |
> + (UHS2_DEV_CONFIG_GEN_SET >> 8);
> +
> + payload[0] = 0;
> + payload[1] = UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE;
> + payload[0] = cpu_to_be32(payload[0]);
> + payload[1] = cpu_to_be32(payload[1]);
> +
> + memset(resp, 0, sizeof(resp));
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> + resp, UHS2_CFG_WRITE_GENERIC_SET_RESP_LEN);
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + if (err) {
> + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + /* Set host Config Setting registers */
> + err = host->ops->uhs2_control(host, UHS2_SET_CONFIG);
> + if (err) {
> + pr_err("%s: %s: UHS2 SET_CONFIG fail!\n", mmc_hostname(host), __func__);
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static int sd_uhs2_go_dormant(struct mmc_host *host, u32 node_id)
> +{
> + struct mmc_command cmd = {0};
> + struct uhs2_command uhs2_cmd = {};
> + u16 header, arg;
> + __be32 payload[1];
> + int err;
> +
> + /* Disable Normal INT */
> + err = host->ops->uhs2_control(host, UHS2_DISABLE_INT);
> + if (err) {
> + pr_err("%s: %s: UHS2 DISABLE_INT fail!\n",
> + mmc_hostname(host), __func__);
> + return err;
> + }
> +
> + /*
> + * Refer to UHS-II Addendum Version 1.02 Figure 6-17 to see GO_DORMANT_STATE CCMD format.
> + * Header:
> + * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> + * - IOADR = CMD_BASE + 001h
> + * Payload:
> + * - bit [7]: HBR(Entry to Hibernate Mode)
> + * 1: Host intends to enter Hibernate mode during Dormant state.
> + * The default setting is 0 because hibernate is currently not supported.
> + */
> + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id;
> + arg = ((UHS2_DEV_CMD_GO_DORMANT_STATE & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_WRITE |
> + UHS2_NATIVE_CMD_PLEN_4B |
> + (UHS2_DEV_CMD_GO_DORMANT_STATE >> 8);
> +
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_GO_DORMANT_PAYLOAD_LEN,
> + NULL, 0);
> +
> + err = mmc_wait_for_cmd(host, &cmd, 0);
> + if (err) {
> + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + /* Check Dormant State in Present */
> + err = host->ops->uhs2_control(host, UHS2_CHECK_DORMANT);
> + if (err)
> + return err;
> +
> + /* Disable UHS2 card clock */
> + err = host->ops->uhs2_control(host, UHS2_DISABLE_CLK);
> + if (err)
> + return err;
> +
> + /* Restore sd clock */
> + mmc_delay(5);
> + err = host->ops->uhs2_control(host, UHS2_ENABLE_CLK);
> + if (err)
> + return err;
> +
> + /* Enable Normal INT */
> + err = host->ops->uhs2_control(host, UHS2_ENABLE_INT);
> + if (err)
> + return err;
> +
> + /* Detect UHS2 */
> + err = host->ops->uhs2_control(host, UHS2_PHY_INIT);
> + if (err)
> + return err;
> +
> return 0;
> }
>
> -/*
> - * Initialize the UHS-II card through the SD-TRAN transport layer. This enables
> - * commands/requests to be backwards compatible through the legacy SD protocol.
> - * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should
> - * be set through a legacy CMD6. Note that, the power limit that becomes set,
> - * survives a soft reset through the GO_DORMANT_STATE command.
> - */
> -static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card)
> +static int __sd_uhs2_wait_active_state_cb(void *cb_data, bool *busy)
> {
> + struct sd_uhs2_wait_active_state_data *data = cb_data;
> + struct mmc_host *host = data->host;
> + struct mmc_command *cmd = data->cmd;
> + int err;
> +
> + err = mmc_wait_for_cmd(host, cmd, 0);
> + if (err)
> + return err;
> +
> + if (cmd->resp[1] & UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE)
> + *busy = false;
> + else
> + *busy = true;
> +
> return 0;
> }
>
> +static int sd_uhs2_go_dormant_state(struct mmc_host *host, u32 node_id)
> +{
> + struct mmc_command cmd = {0};
> + struct uhs2_command uhs2_cmd = {};
> + u16 header, arg;
> + int err;
> + struct sd_uhs2_wait_active_state_data cb_data = {
> + .host = host,
> + .cmd = &cmd
> + };
> +
> + err = sd_uhs2_go_dormant(host, node_id);
> + if (err) {
> + pr_err("%s: %s: UHS2 GO_DORMANT_STATE fail, err= 0x%x!\n",
> + mmc_hostname(host), __func__, err);
> + return err;
> + }
> +
> + /*
> + * Use Control Read CCMD to check Config Completion(bit 63) in Generic Setting Register.
> + * - Control Read(R/W=0) with 8-Byte payload(PLEN=10b).
> + * - IOADR = Generic Setting Register(CFG_BASE + 008h)
> + *
> + * When UHS-II card been switched to new speed mode, it will set Config Completion to 1.
> + */
> + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id;
> + arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> + UHS2_NATIVE_CMD_READ |
> + UHS2_NATIVE_CMD_PLEN_8B |
> + (UHS2_DEV_CONFIG_GEN_SET >> 8);
> +
> + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> + err = __mmc_poll_for_busy(host, UHS2_WAIT_CFG_COMPLETE_PERIOD_US,
> + UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS,
> + &__sd_uhs2_wait_active_state_cb, &cb_data);
> + if (err) {
> + pr_err("%s: %s: Not switch to Active in 100 ms\n", mmc_hostname(host), __func__);
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static void sd_uhs2_remove(struct mmc_host *host)
> +{
> + mmc_remove_card(host->card);
> + host->card = NULL;
> +}
> +
> /*
> * Allocate the data structure for the mmc_card and run the UHS-II specific
> * initialization sequence.
> */
> -static int sd_uhs2_init_card(struct mmc_host *host)
> +static int sd_uhs2_init_card(struct mmc_host *host, struct mmc_card *oldcard)
> {
> struct mmc_card *card;
> u32 node_id;
> @@ -133,9 +834,14 @@ static int sd_uhs2_init_card(struct mmc_host *host)
> if (err)
> return err;
>
> - card = mmc_alloc_card(host, &sd_type);
> - if (IS_ERR(card))
> - return PTR_ERR(card);
> + if (oldcard) {
> + card = oldcard;
> + } else {
> + card = mmc_alloc_card(host, &sd_type);
> + if (IS_ERR(card))
> + return PTR_ERR(card);
> + }
> + host->card = card;
>
> card->uhs2_config.node_id = node_id;
> card->type = MMC_TYPE_SD;
> @@ -148,18 +854,226 @@ static int sd_uhs2_init_card(struct mmc_host *host)
> if (err)
> goto err;
>
> - host->card = card;
> + /* If change speed to Range B, need to GO_DORMANT_STATE */
> + if (host->ios.timing == MMC_TIMING_UHS2_SPEED_B ||
> + host->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD) {
> + err = sd_uhs2_go_dormant_state(host, node_id);
> + if (err)
> + return err;
> + }
> +
> + host->flags |= MMC_UHS2_SD_TRAN;
> +
> return 0;
>
> err:
> - mmc_remove_card(card);
> + sd_uhs2_remove(host);
> return err;
> }
>
> -static void sd_uhs2_remove(struct mmc_host *host)
> +int sd_uhs2_reinit(struct mmc_host *host)
> {
> - mmc_remove_card(host->card);
> - host->card = NULL;
> + struct mmc_card *card = host->card;
> + int err;
> +
> + sd_uhs2_power_up(host);
> + err = sd_uhs2_phy_init(host);
> + if (err)
> + return err;
> +
> + err = sd_uhs2_init_card(host, card);
> + if (err)
> + return err;
> +
> + mmc_card_set_present(card);
> + return err;
> +}
> +
> +/*
> + * Mask off any voltages we don't support and select
> + * the lowest voltage
> + */
> +u32 sd_uhs2_select_voltage(struct mmc_host *host, u32 ocr)
> +{
> + int bit;
> + int err;
> +
> + /*
> + * Sanity check the voltages that the card claims to
> + * support.
> + */
> + if (ocr & 0x7F) {
> + dev_warn(mmc_dev(host), "card claims to support voltages below defined range\n");
> + ocr &= ~0x7F;
> + }
> +
> + ocr &= host->ocr_avail;
> + if (!ocr) {
> + dev_warn(mmc_dev(host), "no support for card's volts\n");
> + return 0;
> + }
> +
> + if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) {
> + bit = ffs(ocr) - 1;
> + ocr &= 3 << bit;
> + /* Power cycle */
> + err = sd_uhs2_power_off(host);
> + if (err)
> + return 0;
> + err = sd_uhs2_reinit(host);
> + if (err)
> + return 0;
> + } else {
> + bit = fls(ocr) - 1;
> + ocr &= 3 << bit;
> + if (bit != host->ios.vdd)
> + dev_warn(mmc_dev(host), "exceeding card's volts\n");
> + }
> +
> + return ocr;
> +}
> +
> +/*
> + * Initialize the UHS-II card through the SD-TRAN transport layer. This enables
> + * commands/requests to be backwards compatible through the legacy SD protocol.
> + * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should
> + * be set through a legacy CMD6. Note that, the power limit that becomes set,
> + * survives a soft reset through the GO_DORMANT_STATE command.
> + */
> +static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card)
> +{
> + int err;
> + u32 cid[4];
> + u32 ocr;
> + u32 rocr;
> + u8 *status;
> + int ro;
> +
> + /* Send CMD0 to reset SD card */
> + err = __mmc_go_idle(host);
> + if (err)
> + return err;
> +
> + mmc_delay(1);
> +
> + /* Send CMD8 to communicate SD interface operation condition */
> + err = mmc_send_if_cond(host, host->ocr_avail);
> + if (err) {
> + dev_warn(mmc_dev(host), "CMD8 error\n");
> + goto err;
> + }
> +
> + /*
> + * Probe SD card working voltage.
> + */
> + err = mmc_send_app_op_cond(host, 0, &ocr);
> + if (err)
> + goto err;
> +
> + card->ocr = ocr;
> +
> + /*
> + * Some SD cards claims an out of spec VDD voltage range. Let's treat
> + * these bits as being in-valid and especially also bit7.
> + */
> + ocr &= ~0x7FFF;
> + rocr = sd_uhs2_select_voltage(host, ocr);
> + /*
> + * Some cards have zero value of rocr in UHS-II mode. Assign host's
> + * ocr value to rocr.
> + */
> + if (!rocr)
> + rocr = host->ocr_avail;
> +
> + rocr |= (SD_OCR_CCS | SD_OCR_XPC);
> +
> + /* Wait SD power on ready */
> + ocr = rocr;
> +
> + err = mmc_send_app_op_cond(host, ocr, &rocr);
> + if (err)
> + goto err;
> +
> + err = mmc_send_cid(host, cid);
> + if (err)
> + goto err;
> +
> + memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
> + mmc_decode_cid(card);
> +
> + /*
> + * For native busses: get card RCA and quit open drain mode.
> + */
> + err = mmc_send_relative_addr(host, &card->rca);
> + if (err)
> + goto err;
> +
> + err = mmc_sd_get_csd(card);
> + if (err)
> + goto err;
> +
> + /*
> + * Select card, as all following commands rely on that.
> + */
> + err = mmc_select_card(card);
> + if (err)
> + goto err;
> +
> + /*
> + * Fetch SCR from card.
> + */
> + err = mmc_app_send_scr(card);
> + if (err)
> + goto err;
> +
> + err = mmc_decode_scr(card);
> + if (err)
> + goto err;
> +
> + /*
> + * Switch to high power consumption mode.
> + * Even switch failed, sd card can still work at lower power consumption mode, but
> + * performance will be lower than high power consumption mode.
> + */
> + status = kmalloc(64, GFP_KERNEL);
> + if (!status)
> + return -ENOMEM;
> +
> + if (!(card->csd.cmdclass & CCC_SWITCH)) {
> + pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
> + mmc_hostname(card->host));
> + } else {
> + /* send CMD6 to set Maximum Power Consumption to get better performance */
> + err = mmc_sd_switch(card, 0, 3, SD4_SET_POWER_LIMIT_1_80W, status);
> + if (!err)
> + err = mmc_sd_switch(card, 1, 3, SD4_SET_POWER_LIMIT_1_80W, status);
> +
> + err = 0;
> + }
> +
> + /*
> + * Check if read-only switch is active.
> + */
> + ro = mmc_sd_get_ro(host);
> + if (ro < 0) {
> + pr_warn("%s: host does not support read-only switch, assuming write-enable\n",
> + mmc_hostname(host));
> + } else if (ro > 0) {
> + mmc_card_set_readonly(card);
> + }
> +
> + /*
> + * NOTE:
> + * Should we read Externsion Register to check power notification feature here?
> + */
> +
> + kfree(status);
> +
> + return 0;
> +
> +err:
> + sd_uhs2_remove(host);
> + return err;
> }
>
> static int sd_uhs2_alive(struct mmc_host *host)
> @@ -181,38 +1095,181 @@ static void sd_uhs2_detect(struct mmc_host *host)
> mmc_claim_host(host);
> mmc_detach_bus(host);
> sd_uhs2_power_off(host);
> + host->flags &= ~MMC_UHS2_SUPPORT;
> mmc_release_host(host);
> }
> }
>
> +static int _sd_uhs2_suspend(struct mmc_host *host)
> +{
> + struct mmc_card *card = host->card;
> + int err = 0;
> +
> + mmc_claim_host(host);
> +
> + if (mmc_card_suspended(card))
> + goto out;
> +
> + if (mmc_sd_can_poweroff_notify(card))
> + err = sd_poweroff_notify(card);
> +
> + if (!err) {
> + sd_uhs2_power_off(host);
> + mmc_card_set_suspended(card);
> + }
> +
> +out:
> + mmc_release_host(host);
> + return err;
> +}
> +
> +/*
> + * Callback for suspend
> + */
> static int sd_uhs2_suspend(struct mmc_host *host)
> {
> - return 0;
> + int err;
> +
> + err = _sd_uhs2_suspend(host);
> + if (!err) {
> + pm_runtime_disable(&host->card->dev);
> + pm_runtime_set_suspended(&host->card->dev);
> + }
> +
> + return err;
> }
>
> +/*
> + * This function tries to determine if the same card is still present
> + * and, if so, restore all state to it.
> + */
> +static int _mmc_sd_uhs2_resume(struct mmc_host *host)
> +{
> + int err = 0;
> +
> + mmc_claim_host(host);
> +
> + if (!mmc_card_suspended(host->card))
> + goto out;
> +
> + /* Power up UHS2 SD card and re-initialize it. */
> + err = sd_uhs2_reinit(host);
> + mmc_card_clr_suspended(host->card);
> +
> +out:
> + mmc_release_host(host);
> + return err;
> +}
> +
> +/*
> + * Callback for resume
> + */
> static int sd_uhs2_resume(struct mmc_host *host)
> {
> + pm_runtime_enable(&host->card->dev);
> return 0;
> }
>
> +/*
> + * Callback for runtime_suspend.
> + */
> static int sd_uhs2_runtime_suspend(struct mmc_host *host)
> {
> - return 0;
> + int err;
> +
> + if (!(host->caps & MMC_CAP_AGGRESSIVE_PM))
> + return 0;
> +
> + err = _sd_uhs2_suspend(host);
> + if (err)
> + pr_err("%s: error %d doing aggressive suspend\n", mmc_hostname(host), err);
> +
> + return err;
> }
>
> static int sd_uhs2_runtime_resume(struct mmc_host *host)
> {
> - return 0;
> + int err;
> +
> + err = _mmc_sd_uhs2_resume(host);
> + if (err && err != -ENOMEDIUM)
> + pr_err("%s: error %d doing runtime resume\n", mmc_hostname(host), err);
> +
> + return err;
> }
>
> -static int sd_uhs2_shutdown(struct mmc_host *host)
> +static int sd_uhs2_hw_reset(struct mmc_host *host)
> {
> - return 0;
> + int err;
> +
> + sd_uhs2_power_off(host);
> + /* Wait at least 1 ms according to SD spec */
> + mmc_delay(1);
> + sd_uhs2_power_up(host);
> +
> + err = sd_uhs2_reinit(host);
> +
> + return err;
> }
>
> -static int sd_uhs2_hw_reset(struct mmc_host *host)
> +/*
> + * mmc_uhs2_prepare_cmd - prepare for SD command packet
> + * @host: MMC host
> + * @mrq: MMC request
> + *
> + * Initialize and fill in a header and a payload of SD command packet.
> + * The caller should allocate uhs2_command in host->cmd->uhs2_cmd in
> + * advance.
> + *
> + * Return: 0 on success, non-zero error on failure
> + */
> +void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq)
> {
> - return 0;
> + struct mmc_command *cmd;
> + struct uhs2_command *uhs2_cmd;
> + u16 header, arg;
> + __be32 *payload;
> + u8 plen;
> +
> + cmd = mrq->cmd;
> + header = host->card->uhs2_config.node_id;
> + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
> + header |= UHS2_PACKET_TYPE_DCMD;
> + else
> + header |= UHS2_PACKET_TYPE_CCMD;
> +
> + arg = cmd->opcode << UHS2_SD_CMD_INDEX_POS;
> + if (host->uhs2_app_cmd) {
> + arg |= UHS2_SD_CMD_APP;
> + host->uhs2_app_cmd = false;
> + }
> +
> + uhs2_cmd = cmd->uhs2_cmd;
> + payload = uhs2_cmd->payload;
> + plen = 2; /* at the maximum */
> +
> + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC &&
> + !cmd->uhs2_tmode0_flag) {
> + if (mmc_card_uhs2_hd_mode(host))
> + arg |= UHS2_DCMD_2L_HD_MODE;
> +
> + arg |= UHS2_DCMD_LM_TLEN_EXIST;
> +
> + if (cmd->data->blocks == 1 &&
> + cmd->data->blksz != 512 &&
> + cmd->opcode != MMC_READ_SINGLE_BLOCK &&
> + cmd->opcode != MMC_WRITE_BLOCK) {
> + arg |= UHS2_DCMD_TLUM_BYTE_MODE;
> + payload[1] = cpu_to_be32(cmd->data->blksz);
> + } else {
> + payload[1] = cpu_to_be32(cmd->data->blocks);
> + }
> + } else {
> + plen = 1;
> + }
> +
> + payload[0] = cpu_to_be32(cmd->arg);
> + sd_uhs2_cmd_assemble(cmd, uhs2_cmd, header, arg, payload, plen, NULL, 0);
> }
>
> static const struct mmc_bus_ops sd_uhs2_ops = {
> @@ -223,7 +1280,7 @@ static const struct mmc_bus_ops sd_uhs2_ops = {
> .resume = sd_uhs2_resume,
> .runtime_suspend = sd_uhs2_runtime_suspend,
> .runtime_resume = sd_uhs2_runtime_resume,
> - .shutdown = sd_uhs2_shutdown,
> + .shutdown = sd_uhs2_suspend,
> .hw_reset = sd_uhs2_hw_reset,
> };
>
> @@ -231,6 +1288,8 @@ static int sd_uhs2_attach(struct mmc_host *host)
> {
> int err;
>
> + host->flags |= MMC_UHS2_SUPPORT;
> +
> err = sd_uhs2_power_up(host);
> if (err)
> goto err;
> @@ -239,7 +1298,7 @@ static int sd_uhs2_attach(struct mmc_host *host)
> if (err)
> goto err;
>
> - err = sd_uhs2_init_card(host);
> + err = sd_uhs2_init_card(host, NULL);
> if (err)
> goto err;
>
> @@ -256,21 +1315,32 @@ static int sd_uhs2_attach(struct mmc_host *host)
> goto remove_card;
>
> mmc_claim_host(host);
> +
> return 0;
>
> remove_card:
> - mmc_remove_card(host->card);
> - host->card = NULL;
> + sd_uhs2_remove(host);
> mmc_claim_host(host);
> - mmc_detach_bus(host);
> +
> err:
> + mmc_detach_bus(host);
> sd_uhs2_power_off(host);
> + host->flags &= ~MMC_UHS2_SUPPORT;
> return err;
> }
>
> +/**
> + * mmc_attach_sd_uhs2 - select UHS2 interface
> + * @host: MMC host
> + *
> + * Try to select UHS2 interface and initialize the bus for a given
> + * frequency, @freq.
> + *
> + * Return: 0 on success, non-zero error on failure
> + */
> int mmc_attach_sd_uhs2(struct mmc_host *host)
> {
> - int i, err = 0;
> + int i, err;
>
> if (!(host->caps2 & MMC_CAP2_SD_UHS2))
> return -EOPNOTSUPP;
> @@ -285,6 +1355,9 @@ int mmc_attach_sd_uhs2(struct mmc_host *host)
> */
> for (i = 0; i < ARRAY_SIZE(sd_uhs2_freqs); i++) {
> host->f_init = sd_uhs2_freqs[i];
> + pr_info("%s: %s: trying to init UHS-II card at %u Hz\n",
> + mmc_hostname(host), __func__, host->f_init);
> +
> err = sd_uhs2_attach(host);
> if (!err)
> break;