Re: [PATCH v1 2/5] drm/msm/dp: incorporate pm_runtime framework into DP driver

[Kuogee Hsieh]

On 7/8/2023 7:52 PM, Bjorn Andersson wrote:
> On Fri, Jul 07, 2023 at 04:52:20PM -0700, Kuogee Hsieh wrote:
> > Incorporating pm runtime framework into DP driver so that power
> > and clock resource handling can be centralized allowing easier
> > control of these resources in preparation of registering aux bus
> > uring probe.
> >
> > Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> > ---
> >   drivers/gpu/drm/msm/dp/dp_aux.c     |  3 ++
> >   drivers/gpu/drm/msm/dp/dp_display.c | 75 +++++++++++++++++++++++++++++--------
> >   2 files changed, 63 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
> > index 8e3b677..c592064 100644
> > --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> > +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> > @@ -291,6 +291,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
> >   		return -EINVAL;
> >   	}
> >   
> > +	pm_runtime_get_sync(dp_aux->dev);
> >   	mutex_lock(&aux->mutex);
> >   	if (!aux->initted) {
> >   		ret = -EIO;
> > @@ -364,6 +365,8 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
> >   
> >   exit:
> >   	mutex_unlock(&aux->mutex);
> > +	pm_runtime_mark_last_busy(dp_aux->dev);
> > +	pm_runtime_put_autosuspend(dp_aux->dev);
> >   
> >   	return ret;
> >   }
> > diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> > index 76f1395..2c5706a 100644
> > --- a/drivers/gpu/drm/msm/dp/dp_display.c
> > +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> > @@ -309,6 +309,10 @@ static int dp_display_bind(struct device *dev, struct device *master,
> >   		goto end;
> >   	}
> >   
> > +	pm_runtime_enable(dev);
> > +	pm_runtime_set_autosuspend_delay(dev, 1000);
> > +	pm_runtime_use_autosuspend(dev);
> > +
> >   	return 0;
> >   end:
> >   	return rc;
> > @@ -320,9 +324,8 @@ static void dp_display_unbind(struct device *dev, struct device *master,
> >   	struct dp_display_private *dp = dev_get_dp_display_private(dev);
> >   	struct msm_drm_private *priv = dev_get_drvdata(master);
> >   
> > -	/* disable all HPD interrupts */
> > -	if (dp->core_initialized)
> > -		dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false);
> > +	pm_runtime_dont_use_autosuspend(dev);
> > +	pm_runtime_disable(dev);
> >   
> >   	kthread_stop(dp->ev_tsk);
> >   
> > @@ -466,10 +469,12 @@ static void dp_display_host_init(struct dp_display_private *dp)
> >   		dp->dp_display.connector_type, dp->core_initialized,
> >   		dp->phy_initialized);
> >   
> > -	dp_power_init(dp->power);
> > -	dp_ctrl_reset_irq_ctrl(dp->ctrl, true);
> > -	dp_aux_init(dp->aux);
> > -	dp->core_initialized = true;
> > +	if (!dp->core_initialized) {
> > +		dp_power_init(dp->power);
> > +		dp_ctrl_reset_irq_ctrl(dp->ctrl, true);
> > +		dp_aux_init(dp->aux);
> > +		dp->core_initialized = true;
> There are two cases that queries core_initialized, both of those are
> done to avoid accessing the DP block without it first being powered up.
> With the introduction of runtime PM, it seems reasonable to just power
> up the block in those two code paths (and remove the variable).
>
> > +	}
> >   }
> >   
> >   static void dp_display_host_deinit(struct dp_display_private *dp)
> > @@ -478,10 +483,12 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
> >   		dp->dp_display.connector_type, dp->core_initialized,
> >   		dp->phy_initialized);
> >   
> > -	dp_ctrl_reset_irq_ctrl(dp->ctrl, false);
> > -	dp_aux_deinit(dp->aux);
> > -	dp_power_deinit(dp->power);
> > -	dp->core_initialized = false;
> > +	if (dp->core_initialized) {
> > +		dp_ctrl_reset_irq_ctrl(dp->ctrl, false);
> > +		dp_aux_deinit(dp->aux);
> > +		dp_power_deinit(dp->power);
> > +		dp->core_initialized = false;
> > +	}
> >   }
> >   
> >   static int dp_display_usbpd_configure_cb(struct device *dev)
> > @@ -1304,6 +1311,39 @@ static int dp_display_remove(struct platform_device *pdev)
> >   	dp_display_deinit_sub_modules(dp);
> >   
> >   	platform_set_drvdata(pdev, NULL);
> > +	pm_runtime_put_sync_suspend(&pdev->dev);
> > +
> > +	return 0;
> > +}
> > +
> > +static int dp_pm_runtime_suspend(struct device *dev)
> > +{
> > +	struct platform_device *pdev = to_platform_device(dev);
> > +	struct msm_dp *dp_display = platform_get_drvdata(pdev);
> platform_get_drvdata() is a wrapper for dev_get_drvdata(&pdev->dev), so
> there's no need to resolve the platform_device first...
>
> > +	struct dp_display_private *dp;
> > +
> > +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> > +
> > +	dp_display_host_phy_exit(dp);
> > +	dp_catalog_ctrl_hpd_enable(dp->catalog);
> > +	dp_display_host_deinit(dp);
> > +
> > +	return 0;
> > +}
> > +
> > +static int dp_pm_runtime_resume(struct device *dev)
> > +{
> > +	struct platform_device *pdev = to_platform_device(dev);
> > +	struct msm_dp *dp_display = platform_get_drvdata(pdev);
> > +	struct dp_display_private *dp;
> > +
> > +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> > +
> > +	dp_display_host_init(dp);
> > +	if (dp_display->is_edp) {
> > +		dp_catalog_ctrl_hpd_enable(dp->catalog);
> > +		dp_display_host_phy_init(dp);
> > +	}
> >   
> >   	return 0;
> >   }
> > @@ -1409,6 +1449,7 @@ static int dp_pm_suspend(struct device *dev)
> >   }
> >   
> >   static const struct dev_pm_ops dp_pm_ops = {
> > +	SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL)
> >   	.suspend = dp_pm_suspend,
> >   	.resume =  dp_pm_resume,
> >   };
> > @@ -1493,10 +1534,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
> >   	aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
> >   
> >   	if (aux_bus && dp->is_edp) {
> > -		dp_display_host_init(dp_priv);
> > -		dp_catalog_ctrl_hpd_enable(dp_priv->catalog);
> > -		dp_display_host_phy_init(dp_priv);
> I'm probably just missing it, but how do we get here with the host
> powered up and the phy initialized?

if (!dp->core_initialized)  is at dp_display_host_init()

> > -
> >   		/*
> >   		 * The code below assumes that the panel will finish probing
> >   		 * by the time devm_of_dp_aux_populate_ep_devices() returns.
> > @@ -1604,6 +1641,7 @@ void dp_bridge_atomic_enable(struct drm_bridge *drm_bridge,
> >   		dp_hpd_plug_handle(dp_display, 0);
> >   
> >   	mutex_lock(&dp_display->event_mutex);
> > +	pm_runtime_get_sync(&dp_display->pdev->dev);
> >   
> >   	state = dp_display->hpd_state;
> >   	if (state != ST_DISPLAY_OFF && state != ST_MAINLINK_READY) {
> > @@ -1684,6 +1722,8 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
> >   	}
> >   
> >   	drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type);
> > +
> > +	pm_runtime_put_sync(&dp_display->pdev->dev);
> >   	mutex_unlock(&dp_display->event_mutex);
> >   }
> >   
> > @@ -1723,6 +1763,8 @@ void dp_bridge_hpd_enable(struct drm_bridge *bridge)
> >   	struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
> >   
> >   	mutex_lock(&dp->event_mutex);
> > +	pm_runtime_get_sync(&dp->pdev->dev);
> > +
> >   	dp_catalog_ctrl_hpd_enable(dp->catalog);
> >   
> >   	/* enable HDP interrupts */
> > @@ -1744,6 +1786,9 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
> >   	dp_catalog_ctrl_hpd_disable(dp->catalog);
> >   
> >   	dp_display->internal_hpd = false;
> > +
> > +	pm_runtime_mark_last_busy(&dp->pdev->dev);
> > +	pm_runtime_put_autosuspend(&dp->pdev->dev);
> >   	mutex_unlock(&dp->event_mutex);
> >   }
> The runtime_get/put in dp_bridge_hpd_enable() and disable matches my
> expectations. But in the case that we have an external HPD source, where
> will the power be turned on?
>
> Note that you can test this on your device by routing the HPD GPIO to a
> display-connector instance and wiring this to the DP node. In the same
> way it's done here:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/qcom/sa8295p-adp.dts#n28
>
> Regards,
> Bjorn
>
> >   
> > --
> > 2.7.4