Re: [PATCH v2 1/3] dt-bindings: watchdog: ti,rti-wdt: Add support for WDIOF_CARDRESET

[Li, Hua Qian]

On Tue, 2023-07-11 at 11:23 +0200, Krzysztof Kozlowski wrote:
> On 11/07/2023 11:17, huaqian.li@xxxxxxxxxxx wrote:
> > From: Li Hua Qian <huaqian.li@xxxxxxxxxxx>
> > 
> > TI RTI (Real Time Interrupt) Watchdog doesn't support to record the
> > watchdog cause. Add a reserved memory to know the last reboot was
> > caused
> > by the watchdog card. In the reserved memory, some specific info
> > will be
> > saved to indicate whether the watchdog reset was triggered in last
> > boot.
> > 
> > Signed-off-by: Li Hua Qian <huaqian.li@xxxxxxxxxxx>
> > ---
> 
> Missing changelog.
Thanks for pointing out.
> 
> >  .../devicetree/bindings/watchdog/ti,rti-wdt.yaml    | 13
> > ++++++++++++-
> >  1 file changed, 12 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-
> > wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-
> > wdt.yaml
> > index fc553211e42d..f227db08dc70 100644
> > --- a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
> > +++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
> > @@ -26,7 +26,18 @@ properties:
> >        - ti,j7-rti-wdt
> >  
> >    reg:
> > -    maxItems: 1
> > +    maxItems: 2
> 
> The expected syntax is in such case:
>   items:
>     - description: ...
>     - description: ...
> 
> You will find plenty of examples for this.
> 
> > +      description:
> > +       - Contains the address and the size of MCU RTI register.
> > +       - Contains the address and the size of reserved memory,
> > which
> 
> I don't think Conor suggested using reg of the device, but reg of
> reserved memory. This is not device address space, but just some
> random
> memory.
> 
> memory-region seems proper to me. We were just discussing totally
> useless new property of size.
I guess I misunderstood what Conor suggested, I will change back to
memory-region and get size from reserved-memory. Does this look good
to you?
> 
> What's more - you did not test it... so usual template:
> 
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).
> 
> Best regards,
> Krzysztof
> 
Sorry for this, I will make sure this is no problem in the next
version.

Best regards,
Li Hua Qian