[PATCH v2 04/11] firmware: arm_scmi: Align perf ops to use domain-id as in-parameter
From: Ulf Hansson
Date: Thu Jul 13 2023 - 10:19:07 EST
Most scmi_perf_proto_ops are already using an "u32 domain" as an
in-parameter to indicate what performance domain we shall operate upon.
However, some of the ops are using a "struct device *dev", which means that
an additional OF parsing is needed each time the perf ops gets called, to
find the corresponding domain-id.
To avoid the above, but also to make the code more consistent, let's
replace the in-parameter "struct device *dev" with an "u32 domain". Note
that, this requires us to make some corresponding changes to the scmi
cpufreq driver, so let's do that too.
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
Changes in v2:
- None.
---
drivers/cpufreq/scmi-cpufreq.c | 14 +++++++++-----
drivers/firmware/arm_scmi/perf.c | 18 +++++-------------
include/linux/scmi_protocol.h | 6 +++---
3 files changed, 17 insertions(+), 21 deletions(-)
diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 7d05d48c0337..125e8a8421fb 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -137,7 +137,7 @@ scmi_get_cpu_power(struct device *cpu_dev, unsigned long *power,
static int scmi_cpufreq_init(struct cpufreq_policy *policy)
{
- int ret, nr_opp;
+ int ret, nr_opp, domain;
unsigned int latency;
struct device *cpu_dev;
struct scmi_data *priv;
@@ -149,6 +149,10 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
return -ENODEV;
}
+ domain = scmi_cpu_domain_id(cpu_dev);
+ if (domain < 0)
+ return domain;
+
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -187,7 +191,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
*/
nr_opp = dev_pm_opp_get_opp_count(cpu_dev);
if (nr_opp <= 0) {
- ret = perf_ops->device_opps_add(ph, cpu_dev);
+ ret = perf_ops->device_opps_add(ph, cpu_dev, domain);
if (ret) {
dev_warn(cpu_dev, "failed to add opps to the device\n");
goto out_free_cpumask;
@@ -220,7 +224,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
}
priv->cpu_dev = cpu_dev;
- priv->domain_id = scmi_cpu_domain_id(cpu_dev);
+ priv->domain_id = domain;
policy->driver_data = priv;
policy->freq_table = freq_table;
@@ -228,14 +232,14 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
/* SCMI allows DVFS request for any domain from any CPU */
policy->dvfs_possible_from_any_cpu = true;
- latency = perf_ops->transition_latency_get(ph, cpu_dev);
+ latency = perf_ops->transition_latency_get(ph, domain);
if (!latency)
latency = CPUFREQ_ETERNAL;
policy->cpuinfo.transition_latency = latency;
policy->fast_switch_possible =
- perf_ops->fast_switch_possible(ph, cpu_dev);
+ perf_ops->fast_switch_possible(ph, domain);
return 0;
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index f3ea96dd845c..6046c0eb5959 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -585,18 +585,14 @@ static int scmi_dev_domain_id(struct device *dev)
}
static int scmi_dvfs_device_opps_add(const struct scmi_protocol_handle *ph,
- struct device *dev)
+ struct device *dev, u32 domain)
{
- int idx, ret, domain;
+ int idx, ret;
unsigned long freq;
struct scmi_opp *opp;
struct perf_dom_info *dom;
struct scmi_perf_info *pi = ph->get_priv(ph);
- domain = scmi_dev_domain_id(dev);
- if (domain < 0)
- return domain;
-
dom = pi->dom_info + domain;
for (opp = dom->opp, idx = 0; idx < dom->opp_count; idx++, opp++) {
@@ -618,14 +614,10 @@ static int scmi_dvfs_device_opps_add(const struct scmi_protocol_handle *ph,
static int
scmi_dvfs_transition_latency_get(const struct scmi_protocol_handle *ph,
- struct device *dev)
+ u32 domain)
{
struct perf_dom_info *dom;
struct scmi_perf_info *pi = ph->get_priv(ph);
- int domain = scmi_dev_domain_id(dev);
-
- if (domain < 0)
- return domain;
dom = pi->dom_info + domain;
/* uS to nS */
@@ -685,12 +677,12 @@ static int scmi_dvfs_est_power_get(const struct scmi_protocol_handle *ph,
}
static bool scmi_fast_switch_possible(const struct scmi_protocol_handle *ph,
- struct device *dev)
+ u32 domain)
{
struct perf_dom_info *dom;
struct scmi_perf_info *pi = ph->get_priv(ph);
- dom = pi->dom_info + scmi_dev_domain_id(dev);
+ dom = pi->dom_info + domain;
return dom->fc_info && dom->fc_info[PERF_FC_LEVEL].set_addr;
}
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index ed032fe83c28..71072fe8ccc9 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -140,9 +140,9 @@ struct scmi_perf_proto_ops {
u32 *level, bool poll);
int (*device_domain_id)(struct device *dev);
int (*transition_latency_get)(const struct scmi_protocol_handle *ph,
- struct device *dev);
+ u32 domain);
int (*device_opps_add)(const struct scmi_protocol_handle *ph,
- struct device *dev);
+ struct device *dev, u32 domain);
int (*freq_set)(const struct scmi_protocol_handle *ph, u32 domain,
unsigned long rate, bool poll);
int (*freq_get)(const struct scmi_protocol_handle *ph, u32 domain,
@@ -150,7 +150,7 @@ struct scmi_perf_proto_ops {
int (*est_power_get)(const struct scmi_protocol_handle *ph, u32 domain,
unsigned long *rate, unsigned long *power);
bool (*fast_switch_possible)(const struct scmi_protocol_handle *ph,
- struct device *dev);
+ u32 domain);
enum scmi_power_scale (*power_scale_get)(const struct scmi_protocol_handle *ph);
};
--
2.34.1