[PATCH 2/2] serial: qcom-geni: clean up clock-rate debug printk

[Johan Hovold]

Make the clock-rate debug printk more readable by using an equal sign
instead of a dash as separator between names and values and adding some
spaces:

	qcom_geni_serial 988000.serial: desired_rate = 1843200, clk_rate = 7372800, clk_div = 4

Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
 drivers/tty/serial/qcom_geni_serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 8be896dbaa88..753ac68d03a6 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1246,7 +1246,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
 		goto out_restart_rx;
 	}
 
-	dev_dbg(port->se.dev, "desired_rate-%u, clk_rate-%lu, clk_div-%u\n",
+	dev_dbg(port->se.dev, "desired_rate = %u, clk_rate = %lu, clk_div = %u\n",
 			baud * sampling_rate, clk_rate, clk_div);
 
 	uport->uartclk = clk_rate;
-- 
2.41.0