Re: [PATCH v2 3/6] net: phy: at803x: enable qca8081 slave seed conditionally

[Andrew Lunn]

On Fri, Jul 14, 2023 at 02:31:33PM +0800, Luo Jie wrote:
> qca8081 is the single port PHY, the slave prefer mode is used
> by default.
> 
> if the phy master perfer mode is configured, the slave seed
> configuration should not be enabled, since the slave seed
> enablement ignores the master/slave perfer configuration,
> which is not expected.
> 
> disable slave seed if the master mode is preferred.
> 
> Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew