Re: [PATCH 13/14] arm64: dts: qcom: sm8250: Add interconnect paths to UFSHC

[Konrad Dybcio]

On 12.07.2023 12:32, Manivannan Sadhasivam wrote:
> UFS host controller requires interconnect path configuration for proper
> working. So let's specify them for SM8250 SoC.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
Duplicate

Konrad
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 72fd66db9c51..7a495ff7512f 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -2197,6 +2197,10 @@ ufs_mem_hc: ufshc@1d84000 {
>  
>  			operating-points-v2 = <&ufs_opp_table>;
>  
> +			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
> +			interconnect-names = "ufs-ddr", "cpu-ufs";
> +
>  			status = "disabled";
>  
>  			ufs_opp_table: opp-table {