Re: [PATCH v3 5/7] arm64: dts: qcom: pm6150: Add resin and rtc nodes

[Konrad Dybcio]

On 15.07.2023 11:16, David Wronek wrote:
> Add support for the RTC which is the same as on other PMICs and add the
> resin child node to the PM6150 PON device, both disabled by default.
> 
> Signed-off-by: David Wronek <davidwronek@xxxxxxxxx>
> Tested-by: Nikita Travkin <nikita@xxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
> index 2e6afa296141..af51eb0646ba 100644
> --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
> @@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey {
>  				bias-pull-up;
>  				linux,code = <KEY_POWER>;
>  			};
> +
> +			pm6150_resin: resin {
> +				compatible = "qcom,pm8941-resin";
> +				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +				status = "disabled";
> +			};
>  		};
>  
>  		pm6150_temp: temp-alarm@2400 {
> @@ -88,6 +96,14 @@ pm6150_adc_tm: adc-tm@3500 {
>  			status = "disabled";
>  		};
>  
> +		pm6150_rtc: rtc@6000 {
> +			compatible = "qcom,pm8941-rtc";
> +			reg = <0x6000>, <0x6100>;
> +			reg-names = "rtc", "alarm";
> +			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
> +			status = "disabled";
> +		};
> +
>  		pm6150_gpios: gpio@c000 {
>  			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;