[PATCH v3 5/6] net: phy: at803x: remove qca8081 1G fast retrain and slave seed config

From: Luo Jie
Date: Sun Jul 16 2023 - 04:50:30 EST


The fast retrain and slave seed configs are only applicable when the 2.5G
ability is supported.

Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
---
drivers/net/phy/at803x.c | 50 +++++++++++++++++++++++++---------------
1 file changed, 32 insertions(+), 18 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index cb4c45c81a85..a141f133b8aa 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1750,6 +1750,11 @@ static bool qca808x_is_prefer_master(struct phy_device *phydev)
(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
}

+static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
+{
+ return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
+}
+
static int qca808x_config_init(struct phy_device *phydev)
{
int ret;
@@ -1766,20 +1771,24 @@ static int qca808x_config_init(struct phy_device *phydev)
if (ret)
return ret;

- /* Config the fast retrain for the link 2500M */
- ret = qca808x_phy_fast_retrain_config(phydev);
- if (ret)
- return ret;
-
- ret = genphy_read_master_slave(phydev);
- if (ret < 0)
- return ret;
-
- if (!qca808x_is_prefer_master(phydev)) {
- /* Enable seed and configure lower ramdom seed to make phy linked as slave mode */
- ret = qca808x_phy_ms_seed_enable(phydev, true);
+ if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
+ /* Config the fast retrain for the link 2500M */
+ ret = qca808x_phy_fast_retrain_config(phydev);
if (ret)
return ret;
+
+ ret = genphy_read_master_slave(phydev);
+ if (ret < 0)
+ return ret;
+
+ if (!qca808x_is_prefer_master(phydev)) {
+ /* Enable seed and configure lower ramdom seed to make phy
+ * linked as slave mode.
+ */
+ ret = qca808x_phy_ms_seed_enable(phydev, true);
+ if (ret)
+ return ret;
+ }
}

/* Configure adc threshold as 100mv for the link 10M */
@@ -1821,11 +1830,13 @@ static int qca808x_read_status(struct phy_device *phydev)
* value is configured as the same value, the link can't be up and no link change
* occurs.
*/
- if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
- qca808x_is_prefer_master(phydev)) {
- qca808x_phy_ms_seed_enable(phydev, false);
- } else {
- qca808x_phy_ms_seed_enable(phydev, true);
+ if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
+ if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
+ qca808x_is_prefer_master(phydev)) {
+ qca808x_phy_ms_seed_enable(phydev, false);
+ } else {
+ qca808x_phy_ms_seed_enable(phydev, true);
+ }
}
}

@@ -1840,7 +1851,10 @@ static int qca808x_soft_reset(struct phy_device *phydev)
if (ret < 0)
return ret;

- return qca808x_phy_ms_seed_enable(phydev, true);
+ if (qca808x_has_fast_retrain_or_slave_seed(phydev))
+ ret = qca808x_phy_ms_seed_enable(phydev, true);
+
+ return ret;
}

static bool qca808x_cdt_fault_length_valid(int cdt_code)
--
2.17.1