[PATCH 5/6] ASoC: codecs: msm8916-wcd-analog: Properly handle probe errors

[Stephan Gerhold]

The probe() function fails with an error for platform_get_irq_byname()
but only logs when devm_request_threaded_irq() fails. Make this
consistent and fail to probe in that case as well. In practice this
should never happen unless something is really wrong.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
 sound/soc/codecs/msm8916-wcd-analog.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
index d4456a714c97..9ca381812975 100644
--- a/sound/soc/codecs/msm8916-wcd-analog.c
+++ b/sound/soc/codecs/msm8916-wcd-analog.c
@@ -1216,8 +1216,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
 			       IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
 			       IRQF_ONESHOT,
 			       "mbhc switch irq", priv);
-	if (ret)
+	if (ret) {
 		dev_err(dev, "cannot request mbhc switch irq\n");
+		return ret;
+	}
 
 	if (priv->mbhc_btn_enabled) {
 		irq = platform_get_irq_byname(pdev, "mbhc_but_press_det");
@@ -1229,8 +1231,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
 				       IRQF_TRIGGER_RISING |
 				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				       "mbhc btn press irq", priv);
-		if (ret)
+		if (ret) {
 			dev_err(dev, "cannot request mbhc button press irq\n");
+			return ret;
+		}
 
 		irq = platform_get_irq_byname(pdev, "mbhc_but_rel_det");
 		if (irq < 0)
@@ -1241,9 +1245,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
 				       IRQF_TRIGGER_RISING |
 				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				       "mbhc btn release irq", priv);
-		if (ret)
+		if (ret) {
 			dev_err(dev, "cannot request mbhc button release irq\n");
-
+			return ret;
+		}
 	}
 
 	dev_set_drvdata(dev, priv);

-- 
2.41.0